Boncare Infrared Thermometer

Product Overview

The Boncare Infrared Thermometer is a versatile device designed for accurate temperature measurement in adults, children, and infants. It offers both forehead and ear measurement modes, as well as the ability to measure object temperatures. Key features include a 1-second reading time, fever alarm, 32-measurement memory recall, and a backlit display for easy reading.

Image: The Boncare Infrared Thermometer, a white handheld device with a digital display, shown alongside its blue and white product packaging. The display shows temperature readings and mode indicators.

Safety Information

Please read all instructions carefully before using the thermometer. Keep this manual for future reference.

• Do not immerse the thermometer in water or other liquids.
• Avoid dropping the thermometer or subjecting it to strong impacts.
• Do not attempt to disassemble or repair the thermometer yourself.
• Keep out of reach of children.
• Clean the probe after each use to ensure hygiene and accuracy.
• Consult a medical professional if you have concerns about temperature readings.

Setup

1. Battery Installation

The Boncare Infrared Thermometer requires 2 AAA batteries, which are included. To install or replace batteries:

1. Locate the battery compartment cover on the back of the device.
2. Slide the cover open.
3. Insert the 2 AAA batteries, ensuring correct polarity (+ and -).
4. Close the battery compartment cover securely.

2. Power On and Unit Selection

Press the power button to turn on the thermometer. The device will perform a self-check and display the last reading. To switch between Fahrenheit (°F) and Celsius (°C):

• While the device is off, press and hold the power button for approximately 6 seconds until the unit changes.
• Release the button, and the new unit will be set.

Operating Instructions

1. Forehead Temperature Measurement

For forehead measurements, ensure the probe cover is in place.

1. Turn on the thermometer.
2. Gently place the thermometer probe against the center of the forehead.
3. Press the measurement button once. A short beep will sound.
4. Keep the thermometer steady until a longer beep indicates the measurement is complete (approximately 1 second).
5. The temperature reading will be displayed on the screen.

2. Ear Temperature Measurement

For ear measurements, the probe cover must be removed.

1. Turn on the thermometer.
2. Gently pull off the probe cover. Ensure the two arrows on the cover and device align when replacing it.
3. Carefully insert the probe into the ear canal as far as it can comfortably go.
4. Press the measurement button once. A short beep will sound.
5. Keep the thermometer steady until a longer beep indicates the measurement is complete (approximately 1 second).
6. The temperature reading will be displayed on the screen.

3. Memory Recall

The thermometer can store up to 32 previous temperature readings. To access memory recall:

• With the thermometer on, press the memory button (if available, or the main button multiple times depending on model) to cycle through stored readings.
• Each press will display a previous reading, starting from the most recent.

4. Fever Alarm

The device features a fever alarm. If a temperature exceeds a preset threshold, the display backlight may change color (e.g., red) and an audible alarm may sound to indicate a potential fever.

5. Silent Mode

The thermometer supports a silent mode, which can be useful for measuring temperature without disturbing a sleeping child. Refer to the device's specific button combinations or settings menu to activate/deactivate silent mode.

Maintenance

Cleaning the Thermometer

Regular cleaning ensures accurate readings and hygiene.

• Wipe the thermometer body with a soft, damp cloth.
• For the probe, especially after ear use, gently wipe with an alcohol swab or an antibacterial wipe. Allow it to air dry.
• Do not use abrasive cleaners or immerse the device in water.

Storage

Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. Use the provided storage case or pouch to protect the device when not in use.

Troubleshooting

Specifications

• Model Number: 198715821369
• Product Dimensions: 6.1 x 1.5 x 1.77 inches
• Weight: 4.8 ounces
• Power Source: 2 x AAA Batteries (included)
• Measurement Modes: Forehead, Ear, Object
• Display Type: Digital, Backlit
• Memory: 32 readings
• Special Features: Fever Alarm, Silent Mode, Auto Shut-off
• Material: Plastic
• Care Instructions: Wipe Clean

Warranty and Support

For warranty information or technical support, please contact Boncare customer service. Refer to the product packaging or the official Boncare website for contact details.

Manufacturer: Boncare

First Available Date: February 9, 2021