1. Introduction
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Traumheim Cordless Pressure Washer Model XS-003. Please read this manual thoroughly before using the product and retain it for future reference.
2. Safety Instructions
WARNING: Failure to follow these instructions may result in injury or property damage.
- Always wear appropriate eye protection (safety glasses) when operating the pressure washer.
- Do not point the spray nozzle at people, pets, or electrical devices.
- Keep children and bystanders away from the operating area.
- Never use the pressure washer with flammable liquids or toxic chemicals.
- Ensure all connections are secure before starting the unit.
- Do not immerse the main unit in water.
- Avoid using seawater, as it can corrode internal components of the pressure washer.
- Disconnect the battery before performing any maintenance or cleaning.
3. Package Contents
Verify that all items are present in the package:
- 1 x Cordless Pressure Washer Unit
- 1 x 4000 mAh Battery
- 1 x 6-in-1 Nozzle
- 1 x Rotating Nozzle
- 1 x Foam Sprayer
- 1 x Extension Rod
- 1 x Water Filter
- 1 x 5m Water Hose
- 1 x Charger (European standard)
- 1 x User Manual
- 1 x Carry Bag
4. Product Features
-
700W Brushless Motor: Equipped with a powerful 700W brushless motor for enhanced safety, stability, lower energy consumption, and reduced noise. Delivers up to 120 bar pressure and 300 liters/hour water flow.
Image: Illustration comparing the Traumheim brushless motor (left) with a traditional motor (right), highlighting advantages in lifespan, power, and efficiency.
-
Versatile 6-in-1 Nozzle: Features 0°, 10°, 25°, 40° spray patterns, a water column mode, and a shower function for various cleaning tasks.
Image: Visual guide to the 6-in-1 nozzle, demonstrating its various spray settings including different angles, foam, and shower modes.
-
180° + 360° Rotating Nozzle: Designed for cleaning hard-to-reach areas like small corners and car tires, offering enhanced flexibility.
Image: Examples of the rotating nozzle in use, showing its ability to clean high surfaces and car wheels effectively.
-
3-Speed Pressure Modes: Adjust water pressure for different cleaning needs: high speed for stubborn stains (120 bar), medium speed for general cleaning (90 bar), and low speed for light stains (56 bar).
Image: Visual representation of the three pressure modes and their recommended uses, from heavy-duty to light cleaning.
-
4000mAh Battery: Provides 22 to 62 minutes of operation on a full charge, with a charging time of 4-5 hours.
Image: Detailed view of the 4000mAh battery, indicating its voltage, charge time, and operational duration.
-
Convenient Water Access: Connects to a 5m hose with a filter, allowing easy water drawing from any source.
Image: Demonstration of the improved water filter, illustrating its effectiveness in drawing water from various sources like buckets, ponds, and pools.
5. Setup
-
Charge the Battery: Connect the 4000mAh battery to the provided charger. The charging indicator will show the charging status. A full charge typically takes 4-5 hours.
Image: The 4000mAh battery, illustrating its charging and operational duration.
-
Connect the Water Hose and Filter: Attach the 5m water hose to the pressure washer's water inlet. Ensure the water filter is securely attached to the other end of the hose to prevent debris from entering the pump.
Image: The water filter, demonstrating its function in drawing clean water from various sources.
- Attach Extension Rod and Nozzle: Connect the extension rod to the pressure washer. Then, attach your desired nozzle (6-in-1 or rotating nozzle) to the end of the extension rod. Ensure it clicks into place securely.
- Insert Battery: Once charged, insert the battery into the designated slot on the pressure washer until it locks into place.
6. Operating Instructions
- Prepare Water Source: Place the filtered end of the water hose into your water source (e.g., bucket, pond, pool). Ensure the filter is fully submerged.
- Power On and Prime: Press the power button to turn on the pressure washer. Squeeze the trigger to allow water to flow through the system and expel any air, priming the pump. This may take a few seconds.
-
Select Pressure Mode: Use the speed adjustment button on the unit to cycle through the 3 pressure modes (I, II, III) to match your cleaning requirement.
- Mode I (56 Bar): For lighter stains and delicate surfaces.
- Mode II (90 Bar): For general cleaning tasks.
- Mode III (120 Bar): For stubborn stains and heavy-duty cleaning.
Image: Control panel and visual examples of the three pressure modes in action.
-
Adjust Nozzle Spray Pattern:
- 6-in-1 Nozzle: Rotate the nozzle head to select the desired spray pattern (0°, 10°, 25°, 40°, water column, or shower function).
Image: How to rotate the 6-in-1 nozzle to change spray patterns.
- Rotating Nozzle: This nozzle provides a powerful, rotating jet for concentrated cleaning of tough dirt and hard-to-reach areas. It can be rotated 180° and 360° for optimal angle.
Image: The rotating nozzle in use for high and corner cleaning.
- 6-in-1 Nozzle: Rotate the nozzle head to select the desired spray pattern (0°, 10°, 25°, 40°, water column, or shower function).
-
Using the Foam Sprayer: Fill the foam sprayer bottle with appropriate cleaning solution. Attach it to the extension rod. Adjust the foam output using the Max/Min dial on the sprayer. Squeeze the trigger to apply foam.
Image: The foam sprayer in action, demonstrating its adjustable foam output for car washing.
- Cleaning: Hold the pressure washer firmly and direct the spray at the surface to be cleaned. Maintain a safe distance to avoid damage to the surface.
- Power Off: Release the trigger and press the power button to turn off the unit. Disconnect the battery when finished.
7. Maintenance
-
Clean the Water Filter: Regularly inspect and clean the water filter to ensure optimal water flow and prevent clogging. Rinse it under running water to remove any debris.
Image: The water filter, highlighting its importance for clean water intake.
- Rinse After Use: After using cleaning solutions, run clean water through the pressure washer for a few minutes to flush out any chemical residues.
- Battery Care: Store the battery in a cool, dry place. Do not expose it to extreme temperatures. Charge the battery fully before long-term storage and recharge every 3-6 months to maintain its health.
- Storage: Store the pressure washer in a dry, frost-free environment. Disconnect all hoses and accessories. If storing for an extended period, ensure the unit is completely drained of water.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No water pressure or low pressure | Clogged filter; Air in pump; Insufficient water supply; Loose hose connection. | Clean water filter; Prime the pump by squeezing trigger until steady flow; Ensure water source is adequate; Check all hose connections. |
| Unit does not start | Battery not charged; Battery not inserted correctly; Power button not pressed. | Charge battery fully; Reinsert battery securely; Press power button firmly. |
| Water leakage | Loose connections; Damaged O-rings. | Tighten all connections; Inspect and replace O-rings if damaged. |
If problems persist, please contact customer support.
9. Specifications
- Model Number: XS-003
- Motor Type: 700W Brushless Motor
- Max Pressure: 120 Bar
- Max Flow Rate: 300 Liters per hour
- Battery: 4000 mAh, 21V Lithium-ion
- Charging Time: 4-5 hours
- Operating Time: 22-62 minutes (depending on speed mode)
- Hose Length: 5 Meters
- Product Dimensions (L x W x H): 40 x 25 x 10 cm
- Item Weight: 2.9 Kilograms
- UPC: 791986649573
10. Warranty and Support
Your Traumheim Cordless Pressure Washer is covered by a 12-month warranty. We are committed to consumer satisfaction. If you encounter any issues with your product, please do not hesitate to contact us. Our customer service team is ready to assist you.
For support, please refer to the contact information provided with your purchase or visit the official Traumheim website.