Introduction
This manual provides detailed instructions for the setup, operation, and maintenance of your Meidase S950 Cellular Trail Camera. The S950 is designed for wildlife monitoring and security applications, featuring 4G LTE connectivity, high-resolution imaging, and app control. Please read this manual thoroughly before using the camera to ensure optimal performance and longevity.
Image: The Meidase S950 Cellular Trail Camera shown alongside a smartphone displaying its gallery interface, illustrating the camera's design and app connectivity.
What's in the Box
Verify that all components are present upon unboxing:
- 1 x Meidase S950 Cellular Trail Camera
- 1 x Pre-Installed SIM Card
- 1 x Mounting Strap
- 1 x Antenna
- 1 x Camera Instruction Manual (this document)
- 1 x USB Cable
Note: SD card and batteries are not included and must be purchased separately.
Setup
1. Battery Installation
The S950 camera requires 8 AA batteries.
- Open the camera's housing latch.
- Locate the battery compartment.
- Insert 8 AA batteries, ensuring correct polarity (+/-).
- Close the battery compartment securely.
2. SIM Card Installation
A pre-installed SIM card is included. Ensure it is properly seated.
- The camera supports 4G LTE and is compatible with AT&T, Verizon, and T-Mobile networks.
- The camera will automatically connect to the strongest available signal.
Image: The Meidase S950 camera mounted on a tree, illustrating its triple network support for AT&T, T-Mobile, and Verizon, with signal strength indicators.
3. SD Card Installation
An SD card (not included) is required to store photos and videos.
- Locate the SD card slot inside the camera housing.
- Insert a compatible SD card (up to 256GB, Class 10 or higher recommended) with the metal contacts facing the correct direction until it clicks into place.
- To remove, press the card gently until it springs out.
4. Antenna Attachment
Screw the provided antenna onto the designated port on top of the camera until it is finger-tight. Ensure it is oriented vertically for optimal signal reception.
5. Mounting the Camera
Use the included mounting strap to secure the camera to a tree or pole.
- Thread the strap through the slots on the back of the camera.
- Wrap the strap around the mounting surface and secure it tightly.
- Adjust the camera angle as needed to cover the desired monitoring area.
Image: The Meidase S950 camera mounted on a tree, with its front panel open revealing the 2.4-inch color screen and controls, demonstrating its intuitive setup.
6. App Installation and Initial Setup
Download the Meidase mobile app from your device's app store. Follow the in-app instructions to register your camera and activate your data plan.
- Shared Data Plans: Multiple cameras can be added under a single data plan, pooling data and add-ons for efficient usage.
Image: A diagram showing how multiple Meidase S950 cameras can share a single data plan, indicating potential savings of up to 25%.
Operating Instructions
1. Powering On/Off
Use the ON/OFF switch located inside the camera housing to power the device.
2. Basic Settings (via 2.4" Screen)
The camera features a 2.4-inch color screen for initial configuration.
- Navigate menus using the directional buttons.
- Adjust settings such as date/time, photo/video mode, resolution, and trigger interval.
3. App Control and Features
The Meidase mobile app provides comprehensive control and access to camera features.
- 4G LTE Connectivity: Enables remote access and instant transmission of media.
- 48MP Photos & 1296P HD Videos: Capture high-resolution images and videos.
- Photo & Video Previews: Receive 960x540 photo previews and 3-300 second silent video previews directly to the app.
Image: A smartphone screen showing a clear 960x540 photo preview of deer captured by the Meidase S950 camera, highlighting the instant preview feature.
Image: A person holding a smartphone and viewing a video preview of deer within the Meidase S950 app, demonstrating the video preview functionality.
- Camera Sharing: Share camera access with multiple users via the Meidase mobile app.
Image: A smartphone displaying a deer captured by the camera, with circular insets showing four different individuals also viewing content on their phones, illustrating the camera sharing feature.
4. Viewing Media
Captured photos and videos can be accessed in three ways:
- Meidase App: View previews and download full files directly to your smartphone.
- SD Card: Remove the SD card and insert it into a card reader on a computer.
- USB Cable: Connect the camera to a computer using the provided USB cable to access the SD card contents.
Image: A composite image showing three ways to view media from the Meidase S950: through the mobile app, on a laptop connected via USB, and by inserting the SD card into a card reader.
5. Night Vision
The S950 utilizes 940nm no-glow infrared LEDs for discreet night vision, invisible to animals and humans. This ensures monitoring without disturbing wildlife or alerting intruders.
6. Trigger Speed and Detection
The camera features a 0.1s ultra-fast trigger speed and a 120° wide detection angle, achieved through 3 PIR sensors, to capture motion effectively.
Maintenance
1. Battery Replacement
Replace all 8 AA batteries when the battery indicator on the camera or app shows low power. Using high-quality alkaline or rechargeable batteries is recommended for extended operation.
2. SD Card Management
Regularly check the SD card capacity. Format the SD card periodically (after backing up important data) to maintain optimal performance and prevent data corruption.
3. Cleaning
Gently clean the camera lens and PIR sensors with a soft, dry cloth to ensure clear images and proper motion detection. Avoid abrasive materials or harsh chemicals.
4. Weather Protection
The Meidase S950 is IP66 rated, making it dust-tight and weatherproof. It is designed to withstand various outdoor conditions, including rain and snow, with an operating temperature range of -4°F to 140°F (-20°C to 60°C).
Image: The Meidase S950 camera mounted on a tree during rainfall, with icons indicating its ability to withstand temperatures from -4°F to 140°F, snow, and its IP66 waterproof rating.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Camera not powering on | Low or incorrectly installed batteries | Replace batteries with new ones, ensuring correct polarity. |
| No signal/Cannot transmit data | Weak cellular signal, inactive SIM card, or antenna not properly attached | Relocate camera to an area with better signal. Ensure SIM card is active and antenna is securely attached. Check data plan status in the app. |
| Blurry images/videos | Dirty lens, camera movement, or incorrect focus settings | Clean the lens. Ensure camera is securely mounted. Check focus settings if adjustable (S950 has auto-focus). |
| Excessive battery drain | Frequent triggers, poor signal strength (camera constantly searching), or low-quality batteries | Reduce trigger sensitivity or interval. Ensure good signal strength. Use high-quality alkaline or rechargeable batteries. |
| SD card error | Incompatible or corrupted SD card | Use a Class 10 or higher SD card (up to 256GB). Format the SD card in the camera or on a computer. Try a different SD card. |
Specifications
| Feature | Detail |
|---|---|
| Model | S950 |
| Effective Still Resolution | 48 MP |
| Video Capture Resolution | 1296P, 1080p |
| Connectivity Technology | Wireless, 4G Cellular |
| Compatible Networks | AT&T, Verizon, T-Mobile |
| Trigger Speed | 0.1s |
| Detection Angle | 120° (3 PIR sensors) |
| Night Vision | 940nm No-Glow IR LEDs (36 IR LEDs) |
| Display Screen | 2.4-inch Color Screen |
| Power Source | 8 x AA Batteries (not included) |
| Storage | SD Card (up to 256GB, not included) |
| Water Resistance Level | IP66 (Dust-tight and Weatherproof) |
| Operating Temperature | -4°F to 140°F (-20°C to 60°C) |
| Dimensions (L x W x H) | 2.9 x 5.4 x 4.2 inches |
| Item Weight | 1.32 pounds |
| Included Components | Camera, Pre-Installed SIM Card, Mounting Strap, Antenna, Instruction Manual, USB Cable |
Warranty and Support
For warranty information and customer support, please refer to the official Meidase website or contact their customer service directly. Details are typically provided on the product packaging or through the Meidase mobile application.
You can visit the Meidase Store on Amazon for additional product information and support resources.