Riding'times GT73
Riding'times GT73 Electric Dirt Bike User Manual
Model: GT73 | Brand: Riding'times
Introduction
This manual provides essential information for the safe and effective assembly, operation, maintenance, and troubleshooting of your Riding'times GT73 Electric Dirt Bike. Please read this manual thoroughly before operating the vehicle to ensure proper usage and safety.
Safety Information
- Always wear a helmet and appropriate safety gear when riding.
- Ensure all components are securely fastened before each ride.
- Do not operate the bike under the influence of alcohol or drugs.
- Familiarize yourself with local traffic laws and regulations for electric bikes.
- Avoid riding in extreme weather conditions or on excessively challenging terrain beyond the bike's capabilities.
- Regularly inspect brakes, tires, and battery for optimal performance and safety.
Setup and Assembly
The Riding'times GT73 Electric Dirt Bike is 90% pre-assembled. Follow these steps for final assembly:
- Unpacking: Carefully remove the bike and all components from the packaging. Ensure the toolbox is located and kept for assembly.
- Front Wheel Installation: Remove the front wheel from its packaging. Remove the brake pad protection. Align the brake disc with the caliper and insert the axle through the fork and wheel hub. Securely tighten the axle bolts.
- Handlebar Adjustment: Install the handlebars onto the stem. Adjust them to a comfortable horizontal position and ensure they face forward according to the alignment marks. Tighten all bolts securely.
- Front Fender Installation: Attach the front fender to the designated mounting points on the front fork using the provided screws.
- Rear Shock Absorber Installation: Remove the temporary shock absorbers used for transportation. Stabilize the vehicle, lift the rear wheel, and align the holes to install the hydraulic shock absorbers. Securely fasten them.
- Pedal Installation: Identify the left (L) and right (R) pedals. Screw the pedals into their respective crank arms, tightening them with a wrench. Note that the left pedal tightens counter-clockwise.
- Battery Activation: Lock the battery into its compartment with the key. Shake the battery gently to confirm it is securely fixed. Turn on the battery switch (red switch to "I"). Press the black button to check the battery level.
For a visual guide, please refer to the assembly video below:
Video: Assembly Guide for Riding'times GT73 Electric Dirt Bike (2400W, Ignition Key Version). This video demonstrates the step-by-step process of unboxing and assembling the electric dirt bike, including installing the front wheel, handlebars, fenders, rear shock absorbers, and pedals, as well as activating the battery.
Image: The Riding'times GT73 Electric Dirt Bike, fully assembled and ready for use. This image provides a general overview of the product's appearance.
Operating Instructions
Familiarize yourself with the controls and features of your GT73 Electric Dirt Bike:
- Power On/Off: Unlock the mechanical key lock on the handlebar. Long-press the "Power" button for 2 seconds to start up and enter the P gear. To shut down, long-press the "Power" button again.
- Riding Mode: Squeeze the left brake lever to exit P gear and enter normal riding mode.
- Speed Gears: Press the "S" button to cycle through three speed gears: ECO (Economy), STD (Standard), and TURBO (Maximum Power).
- Headlight: Use the dedicated headlight button to turn the front lights on or off.
- Turn Signals: Utilize the left and right turn signal buttons for indicating turns.
- Horn: Press the horn button to alert others.
- Display: The 5-inch LED display shows real-time speed, distance, and battery life.
- Ignition Key: The ignition key starts the screen and provides security against unauthorized use.
Image: Close-up of the GT73 handlebars, showing the 5-inch LED display, ignition key, brake levers, combination switch, and accelerator. This image highlights the main control interface.
Video: Overview of the Upgraded Riding'times GT73 Electric Dirt Bike. This video showcases the bike in action, demonstrating its features and performance in various environments.
Maintenance
- Battery Care: Charge the 36.4AH dual battery using the two included chargers. A full charge takes approximately 9 hours. Avoid fully draining the battery regularly to prolong its lifespan.
- Tire Pressure: Regularly check and maintain the recommended tire pressure for the 25-inch off-road motorcycle tires to ensure optimal grip and ride quality.
- Brake Inspection: Periodically inspect the 230mm hydraulic disc brakes with EABS for wear and proper function. Ensure brake pads are not excessively worn and brake fluid levels are adequate.
- Suspension Check: Inspect the aluminum alloy hydraulic front fork and 1200LBS rear shock for any signs of damage or leaks. Ensure smooth operation.
- General Cleaning: Keep the bike clean, especially after off-road use. Avoid using high-pressure water jets directly on electrical components.
- Fastener Check: Periodically check all bolts and fasteners for tightness, especially after initial rides and heavy use.
Image: A detailed view of the 48V 36.4AH dual battery system, highlighting its removable design and IP65 waterproof level. This image illustrates the battery's features and location.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Bike does not power on | Battery not switched on, low battery, loose connection, mechanical key not unlocked. | Ensure battery switch is "ON", charge battery, check all electrical connections, unlock mechanical key. |
| Reduced range or power | Low battery charge, riding in Turbo mode excessively, heavy load, challenging terrain, low tire pressure. | Fully charge battery, use ECO or STD mode, check tire pressure, reduce load if possible. |
| Brakes feel spongy or ineffective | Worn brake pads, air in hydraulic system, low brake fluid. | Inspect and replace brake pads if worn. Consult a professional for hydraulic system bleeding or fluid top-up. |
| Unusual noises during operation | Loose components, chain issues, suspension noise. | Check all fasteners for tightness. Inspect chain for proper tension and lubrication. Examine suspension for any issues. |
Specifications
| Feature | Detail |
|---|---|
| Model Name | GT73 |
| Bike Type | Electric Dirt Bike |
| Motor | 2400W Brushless Hub Motor |
| Max Speed | 37 MPH |
| Battery | 36.4AH Dual Battery (1747Wh Capacity) |
| Range (Electric Only) | Up to 85 miles |
| Range (Assist Mode) | Up to 155 miles |
| Charging Time | Approx. 9 hours (with two chargers) |
| Suspension | Aluminum Alloy Hydraulic Front Fork + 1200LBS Rear Shock (Dual Suspension) |
| Brakes | Dual Hydraulic Disc Brakes with 230MM Disc Rotor and EABS |
| Tires | 25-inch Off-Road Motorcycle Tires |
| Frame Material | Carbon Steel |
| Recommended Rider Height | 5'5" to 6'3" (165-190cm) |
| Max Load | 330 lbs (150kg) |
| Net Weight | 116.8 lbs (53kg) |
| Special Feature | Dual Battery, 5-Inch LED Display, 3X LED Headlights, Tail/Turn Signals, Ignition Key Start |
| UL Certification | UL2849 Safety Test Report (for electrical systems) |
| UPC | 726754237836 |
Image: The 25-inch off-road motorcycle tire of the GT73, designed for various terrains including mountain, snow, gravel, and flat roads. This image emphasizes the tire's robust design and versatility.
Image: The high-strength alloy frame of the GT73, forged under 3000 tons of pressure, ensuring durability. The image also shows a UL2849 Safety Test Report, indicating compliance with safety standards.
Warranty and Support
Riding'times offers comprehensive customer support and warranty for your GT73 Electric Dirt Bike:
- Warranty: A 1-year manufacturer's limited warranty covers the motor, battery, and charger.
- Customer Support: Access phone support and 24/7 email support for any inquiries or assistance.
- Repair Centers: Four US repair centers are available for service needs.
For further assistance, please contact our support team at support@riding-times.com.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.