Wyklaus 02001

Wyklaus Head Shaver Model 02001 Instruction Manual

Waterproof Wet & Dry Shaving for Head and Beard Use

1. Important Safety Information

Please read all safety instructions before using the Wyklaus Head Shaver. Failure to follow these instructions may result in electric shock, fire, or serious injury.

2. Product Overview

The Wyklaus Head Shaver Model 02001 is designed for efficient wet and dry shaving of the head and beard. It features a multi-head design for comprehensive coverage and includes various attachments for versatile grooming.

Wyklaus Head Shaver with features highlighted: 7D Floating Head, IPX6 Waterproof, Travel Lock, LED Display, Double-Ring blades.

Image 2.1: Key features of the Wyklaus Head Shaver, including its 7D floating head for contouring, IPX6 waterproof rating for wet or dry use, travel lock function, and LED display for battery and cleaning reminders. It also highlights the double-ring blade design for catching both long and short hairs.

Key Features:

3. Package Contents

The Wyklaus Head Shaver package typically includes the following components:

Wyklaus Head Shaver attachments: Cleansing Brush, Nose Hair Trimmer, Head Shaver, Hair Trimmer, Massage Head.

Image 3.1: Various attachments included with the Wyklaus Head Shaver, such as the cleansing brush, nose hair trimmer, main head shaver, hair trimmer, and massage head.

4. Setup

4.1 Initial Charging

Before first use, fully charge the shaver. Connect the USB charging cable to the shaver and a compatible USB power source (e.g., USB charger, power bank, car charger, laptop charger). The LED display will indicate charging status. A full charge typically takes approximately 120 minutes.

Wyklaus Head Shaver being charged via USB, showing various compatible charging methods like power bank, car charger, and laptop.

Image 4.1: The shaver is rechargeable via Type-C USB, compatible with various power sources such as USB chargers, power banks, car chargers, and laptops. It offers 60 minutes of running time after 120 minutes of charging.

4.2 Attaching/Detaching Heads

To attach a head, align the desired attachment with the shaver body and gently push until it clicks into place. To detach, firmly pull the attachment away from the shaver body.

5. Operating Instructions

5.1 Power On/Off

Press the power button once to turn the shaver on. Press it again to turn it off.

5.2 Using the Travel Lock

To activate the travel lock, press and hold the power button for 3 seconds. The LED display will show a lock icon. To deactivate, press and hold the power button for 3 seconds again.

5.3 Shaving Technique (Head & Beard)

Men using the Wyklaus Head Shaver for various grooming needs, including head shaving, beard trimming, and facial cleansing.

Image 5.1: Demonstrates the versatility of the 5-in-1 head shaver for different grooming applications, including shaving the head, trimming beards, and using the cleansing brush.

5.4 Using Other Attachments

6. Maintenance and Cleaning

Regular cleaning ensures optimal performance and extends the lifespan of your shaver.

6.1 Daily Cleaning

  1. Turn off the shaver and unplug it from any charging source.
  2. Detach the shaver head.
  3. Rinse the shaver head and the main body (if necessary) under warm running water.
  4. Shake off excess water and allow the components to air dry completely before reattaching or storing.

6.2 Deep Cleaning (Weekly/Bi-weekly)

  1. Turn off and unplug the shaver.
  2. Detach the shaver head and carefully open the individual blade covers.
  3. Use the small cleaning brush provided to remove any trapped hair from the blades and inside the shaver head.
  4. Rinse all components under warm running water.
  5. Allow all parts to dry thoroughly before reassembling.

6.3 Blade Replacement

For optimal shaving performance, it is recommended to replace the shaver heads every 6-12 months, depending on usage. Replacement heads can be purchased from authorized retailers or the manufacturer's website.

Close-up of the 7D floating shaver head with multiple rotary blades.

Image 6.1: A detailed view of the 7D floating shaver head, showing the individual rotary blades that require periodic cleaning and replacement.

7. Charging

The Wyklaus Head Shaver is equipped with a rechargeable battery. The LED display indicates the current battery level.

8. Troubleshooting

ProblemPossible CauseSolution
Shaver does not turn on.Battery is depleted. Travel lock is activated.Charge the shaver. Deactivate travel lock by pressing and holding the power button for 3 seconds.
Poor shaving performance.Blades are dull or clogged with hair.Clean the shaver head thoroughly. Consider replacing the shaver head if blades are dull.
Shaver stops during use.Battery is low.Recharge the shaver.
Skin irritation after shaving.Pressing too hard. Dry shaving on sensitive skin. Blades are dull.Use lighter pressure. Try wet shaving with foam/gel. Replace shaver heads if dull.

9. Specifications

Model Name:02001
Brand:Wyklaus
Power Source:Battery Powered
Special Features:Adjustable Handle, Anti-Scratch, Cordless, Fast Charging, Floating Head
Recommended Uses:Back Hair, Chest, Face, Leg, Lip (Note: Use appropriate attachments for specific areas.)
Product Dimensions:24 x 25 x 28 inches; 15.2 ounces
Batteries:1 Nonstandard Battery (included)

10. Warranty and Support

For warranty information, technical support, or to purchase replacement parts, please contact Wyklaus customer service. Refer to the product packaging or the official Wyklaus website for contact details.

Related Documents - 02001

Preview Wyklaus 7D Floating Head Shaver - User Guide and Specifications
Comprehensive guide to the Wyklaus 7D Floating Head Shaver, including product overview, features, charging instructions, specifications, and safety notices. Learn how to use and maintain your Wyklaus shaver for optimal performance.
Preview VT 9800 BT Headset User Manual
User manual for the VT 9800 BT Headset, providing information on features, wearing instructions, charging, connectivity, usage, support, and technical specifications.
Preview FI-1 Function Inverter for Vehicle Decoders User Manual
Comprehensive user manual for the Tams Elektronik FI-1 Function Inverter, detailing its use in model railway layouts. Covers installation, LED connections, safety precautions, troubleshooting, technical specifications, and warranty information.
Preview Lattice ECP5 VIP Processor Board Evaluation Board User Guide
Comprehensive user guide for the Lattice Semiconductor ECP5 VIP Processor Board, detailing its features, interfaces like DDR3, MIPI, and SerDes, programming capabilities, and schematics for embedded vision and FPGA development.
Preview MEDiDOR Moor Heat Carrier: User Manual, Instructions & Safety Guide
Detailed user manual for the MEDiDOR Moor Heat Carrier (02001, 02007). Learn about safe heating, application, cleaning, warranty, and disposal for this therapeutic peat-filled heat pad.