1. Introduction
Thank you for choosing the KEMIMOTO Motorcycle Sound Bar Speaker. This manual provides detailed instructions for the proper installation, operation, and maintenance of your new sound system. Designed for motorcycles, ATVs, and electric scooters, this waterproof sound bar features Bluetooth connectivity, AUX and USB inputs, and customizable RGB lighting to enhance your riding experience.
The speaker is equipped with two 2-inch full-range speakers and a passive radiator, delivering clear audio with 25W RMS and up to 50W peak power. Its robust aluminum alloy construction ensures durability in various weather conditions.
2. Package Contents
Before installation, please verify that all items listed below are present in your package:
- KEMIMOTO Motorcycle Sound Bar Speaker
- Handlebar Mounting Brackets (2 sets)
- Mounting Hardware (screws, washers, nuts)
- Non-slip Rubber Pads
- Power Wiring Harness
- Hex Wrench
- Cable Ties
The package includes the sound bar, two sets of handlebar mounting brackets, various screws, washers, nuts, non-slip rubber pads, a power wiring harness, a hex wrench for assembly, and cable ties for cable management.
3. Installation Guide
This section details the steps for installing your KEMIMOTO Motorcycle Sound Bar Speaker. Ensure your vehicle's ignition is off before beginning installation.
3.1 Mounting the Speaker
- Assemble the mounting brackets using the provided screws and washers.
- Attach the assembled brackets to the speaker. Ensure a secure fit.
- Select a suitable position on your handlebar. The brackets are designed to fit handlebars ranging from 7/8" to 1.25" in diameter.
- Apply the non-slip rubber pads to the inside of the mounting clamps to prevent scratching and ensure a firm grip.
- Securely attach the speaker with the brackets to the handlebar using the hex wrench. The mount is 360-degree rotatable for optimal positioning.
The speaker is designed for easy installation on most motorcycle handlebars. The 360-degree rotatable mount allows for flexible positioning, and the non-slip rubber padding protects your handlebars.
Once mounted, ensure the speaker is firmly in place and does not obstruct your view or control of the vehicle.
3.2 Wiring the Speaker
The KEMIMOTO Sound Bar requires a 12V power source. Connect the power wiring harness to your vehicle's battery or a suitable 12V power supply. Ensure correct polarity (red to positive, black to negative) to prevent damage.
For detailed visual instructions on installation, please refer to the official installation video:
4. Operating Instructions
This section explains how to operate your KEMIMOTO Motorcycle Sound Bar Speaker.
4.1 Power On/Off
- To power on, press and hold the power button (⏻) located on the control panel.
- To power off, press and hold the power button again.
4.2 Connectivity Options
The sound bar offers three ways to connect your audio source:
- Bluetooth: Pair your smartphone or other Bluetooth-compatible device wirelessly. The speaker will enter pairing mode automatically when powered on.
- AUX Input: Connect an MP3 player or other audio device using a 3.5mm auxiliary cable.
- USB Input: Insert a USB stick containing MP3 music files.
Use the mode button (⊞) to switch between Bluetooth, AUX, and USB input modes.
4.3 Audio Playback and Volume
- Use the Play/Pause button (▶‖) to control audio playback.
- Press the '+' button to increase volume and the '-' button to decrease volume.
The speaker delivers clear sound with 25W RMS and 50W peak power, designed for optimal audio even at higher speeds.
4.4 RGB Lighting
The sound bar features customizable RGB lighting with 3 modes and 7 colors. Press the light button (☀) to cycle through the available lighting modes and colors.
5. Maintenance
To ensure the longevity and optimal performance of your KEMIMOTO Motorcycle Sound Bar Speaker, follow these maintenance guidelines:
- Cleaning: Wipe the speaker with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish and waterproof seals.
- Waterproof Protection: The speaker is IP66 rated, meaning it is protected against strong jets of water and dust. While it can withstand rain and splashes, avoid submerging it in water. Ensure the rubber flap covering the USB and AUX ports is securely closed when not in use to maintain water resistance.
- Storage: If storing the speaker for an extended period, disconnect it from the power source and store it in a cool, dry place.
The IP66 rating ensures the speaker's resilience against environmental elements, making it suitable for outdoor use.
6. Troubleshooting
If you encounter any issues with your KEMIMOTO Motorcycle Sound Bar Speaker, please refer to the following troubleshooting tips:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power | Incorrect wiring, loose connection, no power from vehicle. | Check power connections to the battery. Ensure correct polarity. Verify vehicle's 12V power source is active. |
| No sound | Volume too low, incorrect input mode, device not paired (Bluetooth), faulty cable (AUX). | Increase volume. Press the mode button to select the correct input. Re-pair Bluetooth device. Check AUX cable connection. |
| Bluetooth pairing failure | Speaker not in pairing mode, device too far, interference. | Ensure speaker is in Bluetooth mode (blue light flashing). Move device closer to the speaker. Turn off other Bluetooth devices. |
| Sound distortion | Volume too high, poor audio source quality. | Reduce volume. Try a different audio source or file. |
| RGB lights not working | Light mode off, internal fault. | Press the light button to cycle through modes. If issue persists, contact support. |
If these steps do not resolve your issue, please contact KEMIMOTO customer support.
7. Specifications
Detailed technical specifications for the KEMIMOTO Motorcycle Sound Bar Speaker:
| Feature | Specification |
|---|---|
| Model Name | KEMIMOTO Motorcycle Sound Bar |
| Model Number | F0507-00103-BK |
| Brand | KEMIMOTO |
| Speaker Maximum Output Power | 50 Watts (Peak) |
| RMS Power Rating | 25 Watts |
| Frequency Response | 10 KHz |
| Connectivity Technology | Auxiliary, Bluetooth, USB |
| Audio Output Mode | Stereo |
| Mounting Type | Handlebar Mount (7/8" to 1.25" compatible) |
| Enclosure Material | Aluminum, Aluminum Alloy6063, Plastic |
| Speaker Type | Outdoor |
| Additional Features | Dustproof, LED Light, Lightweight, USB Port, Waterproof |
| Water Resistance Level | IP66 Water Resistant |
| Control Method | Touch (Button Controller) |
| Speaker Size | 2 Inches |
| Item Dimensions (D x W x H) | 3.1"D x 9.4"W x 3.1"H |
| Compatible Devices | MP3 Player, Smartphone |
| Compatible Vehicle Types | ATV, Boat, Golf Cart, Motorcycle |
| Input Voltage | 12 Volts |
| Power Source | Corded Electric |
8. Warranty and Support
KEMIMOTO products are designed for quality and durability. For warranty information, please refer to the product packaging or the official KEMIMOTO website.
For technical support, troubleshooting assistance, or any questions regarding your KEMIMOTO Motorcycle Sound Bar Speaker, please contact our customer support team:
- Phone: +1 408 688 7281
- Email: support@kemimoto.com
- Help Center: https://support.kemimoto.com/