BCAN 48-inch Mini Rebounder Fitness Trampoline with Adjustable Handle

Product Overview

The BCAN 48-inch Mini Rebounder Fitness Trampoline with Bar is designed for adults, offering a stable and quiet platform for indoor and outdoor whole-body workouts and relaxation. It features high-quality bungees for a smoother experience, an adjustable handle for balance support, and a foldable frame for convenient storage.

Image: The BCAN 48-inch Mini Rebounder Fitness Trampoline with its adjustable handle.

Important Safety Information

Read all assembly, installation, care, maintenance, and use instructions before assembling and using this rebounder trampoline. Failure to follow these instructions may result in serious injury.

• Before Each Use: You must check whether the frame, jump cloth, leg tubes, and handrails are installed correctly or damaged. Ensure there are no problems before use.
• Unfolding/Folding: Never relax grip on the frame until it is fully open or closed. Keep your head and face clear of the opening frame, and hands/fingers clear of hinges during the opening/unfolding process to prevent serious injury.
• Handlebar Installation: Do not use the rebounder until the handle bar is fully installed. The hinge must be between the handlebar assembly, or serious injury can occur. The U-shape handle bar is not designed to support entire body weight; it is to aid with balance and provide exercise versatility.
• Footwear: During installation and use, please wear shoes with rubber non-slip soles, such as walking shoes, running shoes, or cross-training shoes.
• Legs: All legs and leg caps must be screwed tightly. The trampoline must be placed flat on the ground to avoid wobbling.
• One User: Only one person should use the trampoline at a time.

Assembly Instructions

The BCAN fitness trampoline comes approximately 60% pre-assembled. Complete assembly typically takes about 10 minutes with the provided tools. For a visual guide, please refer to the official installation video below.

Step-by-Step Guide:

1. Unfolding the Frame:
   • Before unfolding, check if pre-installed bungee cords are normal. If not, readjust to avoid popping out.
   • Expand the frame into a semicircle. Keep fingers away from hinges to avoid pinching. If too tight, two adults can install it together.
   • Once fully open, ensure the frame is flat on the floor.
   • Insert two Secure Pins into the two ends of the RAILS and properly secure them with the Wire Ring.
2. Installing Bungees:
   • If bungees are not pre-installed, use the provided triangle tool. Insert the narrow end of the tool into the bungee.
   • Pull back the triangle tool until the wide end is locked into the black metal buckle. Slide the narrow end of the tool towards the mat until the bungee cord snaps into the buckle.
   • Install bungees on each side in a symmetrical manner to ensure even tension.
   

   Image: Visual guide showing the labor-saving tool, detailed instructions, and step-by-step video availability for setup.

3. Attaching Legs:
   • Remove all protective end caps from screw threads and discard.
   • Insert the Legs onto the leg sockets of the trampoline frame and twist clockwise until completely tightened.
   • When all legs are installed, turn your rebounder over. Kneel on the mat and place your hands on the center of the trampoline and shake it to make sure it is stable. If the legs feel loose, tighten them until the trampoline rocks, rotate it until all legs sit on the ground and it feels stable.
   • Washers are provided to adjust the level of the legs if the trampoline doesn't perfectly level.
4. Installing U-Shape Handle Bar:
   • The two handle legs will be installed in place of the normal legs at the two locations shown in the manual. Make sure that a hinge is between the side handles. Attach the rubber caps onto the legs.
   • Connect Handle Supports (#3a and #3a) to the top handle, and secure both sides with snap buttons to create a "top assembly".
   • Lower the top assembly into the handle legs. If the holes of the handle accessories are not aligned, you may have to rotate the entire top assembly 180 degrees for the holes to line up. Adjust the height as necessary before securing with the adjustable knobs.
   

   Image: Close-up of the upgraded adjustable handle with anti-slip foam and quick adjustable knob.

Operating Instructions

The BCAN Mini Rebounder is designed for a variety of fitness activities, providing a joint-friendly and effective workout. The adjustable handle offers additional stability and support for different exercises.

Recommended Exercises:

• Cardio & Weight Loss: Engage in continuous bouncing or jogging in place to elevate heart rate and burn calories.
• Joint-Friendly Rehabilitation: Gentle bouncing provides low-impact exercise, beneficial for joint health and recovery.
• Full-Body Toning: Incorporate squats, lunges, and other bodyweight exercises on the rebounder to tone muscles.
• Stress Relief: Rebounding can be a fun and effective way to relieve stress and improve mood.
• Balance Support: Utilize the 4-level height adjustable handlebar (ranging from 2'6" to 3'5" on the mat) for added balance during High-Intensity Interval Training (HIIT), rehabilitation, or general use.

Image: Demonstrations of joint-friendly rehabilitation, cardio, weight loss, full-body toning, and stress relief exercises on the trampoline.

Key Features for Performance:

• Premium Bungees: The high-quality 8mm bungees provide a smoother and quieter experience (approx. 20dB noise level), offering comfortable workouts and knee/back protection.
• Robust PP Mat: Designed to withstand intense workouts while providing a soft, responsive surface that is easy to clean and built to last.
• Static & Dynamic Load Capacity: The 3mm thickened steel frame provides 550 LBS static support and 440 LBS dynamic load capacity, ensuring stability for high-impact jumps.

Image: Illustration highlighting the 20dB noise level, indicating quiet operation due to bungee cords.

Care and Maintenance

• Regular Inspection: Periodically check all components (frame, bungees, mat, legs, handlebar) for wear, damage, or loose connections. Tighten any loose screws or bolts immediately.
• Cleaning: Wipe down the mat and frame with a damp cloth and mild soap. Avoid harsh chemicals that could damage the materials. Ensure all parts are dry before storage.
• Storage: The unique foldable frame structure allows for easy storage. The folded size is 16.5'' x 35.4'', approximately 20% of the fully unfolded size. Store in a dry place away from direct sunlight and extreme temperatures.
• Bungee Cords: While durable, bungee cords may degrade over time. Replace any worn or damaged cords to maintain optimal performance and safety.

Image: The BCAN Mini Rebounder in its folded state, demonstrating its compact storage capability.

Troubleshooting Common Issues

• Trampoline Wobbles: Ensure all legs are screwed in tightly and the trampoline is placed on a flat, even surface. Adjust leg washers if necessary to achieve perfect leveling.
• Bungee Cords Popping Out: During assembly, ensure bungee cords are installed symmetrically and securely into the metal buckles. If a cord pops out during use, cease activity immediately and re-install or replace the cord.
• Handlebar Feels Loose: Check that all adjustable knobs are securely tightened. If the handlebar still feels loose, re-check the hinge connection points as per assembly instructions.
• Unusual Noises: While designed for quiet operation, any new or unusual noises may indicate a loose part. Inspect all connections and components.

Product Specifications

Warranty and Customer Support

This BCAN Mini Rebounder Trampoline comes with a 1-year manufacturer's warranty. For any questions, concerns, or warranty claims, please contact BCAN customer support directly. Refer to the product packaging or the official BCAN website for the most up-to-date contact information.