SUPCASE Unicorn Beetle Grip Case User Manual

Introduction

This manual provides essential information for the proper installation, use, and maintenance of your SUPCASE Unicorn Beetle Grip case for the Samsung Galaxy Z Flip 7. This case is designed to offer robust protection and enhanced functionality for your device.

Key features include:

• MagSafe Wireless Charging Compatibility: Integrated N52 magnets ensure secure attachment and efficient wireless charging.
• Military-Grade 360° Protection: A hybrid TPU and PC design with external corner airbags provides drop and scratch resistance, meeting MIL STD 810H-516.8 military standards.
• Integrated Hinge Stand: A high-strength zinc alloy hinge supports stable horizontal (55° viewing angle) and portrait (35° viewing angle) standing.
• Built-in Front Screen Protector: Features 9H tempered glass with high transparency (≥95% light transmittance) to protect the outer screen without affecting touch sensitivity.
• Anti-Slip Grip: Textured patterns on the sides enhance grip and prevent accidental slips.

Setup and Installation

Follow these steps to properly install your SUPCASE Unicorn Beetle Grip case onto your Samsung Galaxy Z Flip 7.

1. Verify Compatibility: Ensure your device is the Samsung Galaxy Z Flip 7 (6.9 Inch 5G 2025). This case is not compatible with Z Flip 7 FE 6.7 Inch, Z Fold 6, Z Flip 6, or Z Flip 5 models.
2. Prepare Your Device: Clean your Samsung Galaxy Z Flip 7 thoroughly to remove any dust or debris from the screen and body.
3. Install the Front Cover: Carefully align the front cover piece with the top half of your phone, ensuring the built-in screen protector sits flush over the outer display. Gently press around the edges until it snaps securely into place.
4. Install the Back Cover: Slide the bottom half of your phone into the back cover piece, ensuring the hinge protection aligns correctly. Press firmly around the edges until both halves of the case are securely attached to the phone.
5. Adhesive Strips (Optional): The case includes replaceable adhesive strips for the front cover to prevent dust from getting underneath. If needed, peel off the old strips and carefully apply new ones to the designated areas on the inside of the front case.

Image: Compatibility check for Samsung Galaxy Z Flip 7.

Operating Instructions

Using the Built-in Kickstand

The integrated zinc alloy hinge stand provides convenient hands-free viewing.

• Horizontal Viewing: Gently pull out the kickstand from the back of the case. Position your phone horizontally for a stable 55° viewing angle, ideal for watching videos.
• Portrait Viewing: The kickstand also supports a fixed 35° viewing angle in portrait mode, suitable for video calls or browsing.

Image: The metal kickstand providing rock-solid support for both vertical and horizontal viewing.

MagSafe Wireless Charging

The case features built-in N52 magnets for compatibility with MagSafe accessories.

• Magnetic Alignment: Align your MagSafe-compatible wireless charger or accessory with the magnetic ring on the back of the case. The magnets will ensure a strong hold and optimal alignment for efficient charging.
• Accessory Compatibility: This case is compatible with magnetic wireless car chargers and MagSafe chargers. It may not be compatible with standard Samsung wireless charging pads or wireless MagSafe power banks due to specific design requirements.

Image: Strong N52 magnets ensuring secure attachment for MagSafe wireless charging.

Maintenance

To ensure the longevity and optimal performance of your SUPCASE Unicorn Beetle Grip case, follow these maintenance guidelines:

• Regular Cleaning: Wipe the case regularly with a soft, damp cloth to remove dust, fingerprints, and smudges. Avoid abrasive cleaners or solvents that could damage the material.
• Screen Protector Care: The built-in 9H tempered glass screen protector can be cleaned with a microfiber cloth. If dust or lint accumulates under the screen protector, carefully remove the front case, clean both surfaces, and reattach.
• Avoid Extreme Conditions: Do not expose the case to extreme temperatures or harsh chemicals, as this may degrade the material and protective properties.
• Check for Damage: Periodically inspect the case for any signs of wear or damage, especially after drops. While designed for military-grade protection, severe impacts can compromise its integrity.

Troubleshooting

If you encounter any issues with your SUPCASE Unicorn Beetle Grip case, consider the following:

• Case Feels Loose: Ensure both the front and back pieces of the case are fully snapped into place around your phone. If you have an existing screen protector on your phone, it might interfere with the case's fit, preventing it from snapping completely. Remove any third-party screen protectors before installing the case.
• Dust Under Screen Protector: If dust or lint appears under the built-in screen protector, carefully remove the front case, clean the phone's screen and the inside of the case's screen protector with a microfiber cloth, then re-install the front case.
• Wireless Charging Issues: Verify that your wireless charger is MagSafe compatible. Ensure proper alignment of the phone on the charging pad. Some non-MagSafe wireless chargers or power banks may not work optimally due to the case's design.
• Kickstand Malfunction: If the kickstand does not deploy or hold its position correctly, check for any obstructions or damage to the hinge mechanism.

Specifications

Warranty Information

The SUPCASE Unicorn Beetle Grip case comes with a 1-year warranty. This warranty covers manufacturing defects and ensures the product performs as described under normal use. For warranty claims or further details, please contact SUPCASE customer support directly.

Support

For technical assistance, troubleshooting, or general inquiries regarding your SUPCASE Unicorn Beetle Grip case, please refer to the following resources:

• Online Support: Visit the official SUPCASE website for FAQs, product guides, and contact information.
• Seller Contact: If purchased through a marketplace, you may contact the seller directly for support related to your order. The seller for this product is Extreme Protection Store.