Simple Energy Simple ONE

Simple Energy Simple ONE Electric Scooter User Manual

Model: Simple ONE

1. Introduction

This manual provides essential information for the safe and efficient operation, maintenance, and care of your Simple Energy Simple ONE electric scooter. Please read this manual thoroughly before operating the scooter to ensure proper usage and to prevent damage or injury. Keep this manual for future reference.

2. Safety Information

Operating an electric scooter requires adherence to safety guidelines. Always wear a helmet and appropriate protective gear. Familiarize yourself with local traffic laws and regulations before riding.

  • Always perform a pre-ride inspection.
  • Do not operate the scooter under the influence of alcohol or drugs.
  • Maintain a safe distance from other vehicles and pedestrians.
  • Avoid sudden braking or acceleration.
  • Ensure the battery is securely latched before riding.

3. Scooter Overview

The Simple ONE electric scooter is designed for urban mobility, featuring a powerful motor, long-range battery, and smart connectivity. Below are key visual components.

Simple Energy Simple ONE Electric Scooter, front three-quarter view

Figure 3.1: Front three-quarter view of the Simple Energy Simple ONE Electric Scooter in Brazen Black.

Simple Energy Simple ONE Electric Scooter, side view

Figure 3.2: Side profile of the Simple Energy Simple ONE Electric Scooter, highlighting its design.

Simple Energy Simple ONE Electric Scooter, instrument console

Figure 3.3: Close-up of the 7-inch TFT touchscreen instrument console.

Simple Energy Simple ONE Electric Scooter, under-seat storage

Figure 3.4: View of the 30L under-seat storage compartment.

4. Setup and Initial Preparation

4.1 Unpacking

Carefully remove the scooter and all accessories from the packaging. Retain packaging materials for potential future transport or service needs.

4.2 Battery Installation and First Charge

  1. Locate the battery compartment, typically under the seat.
  2. Insert the 5 kWh battery pack securely.
  3. Connect the 750W charger to the scooter's charging port and then to a standard power outlet.
  4. Allow the battery to fully charge before the first ride. The instrument console will indicate charging status.

4.3 Pre-Ride Inspection

  • Check tire pressure and condition.
  • Verify brake functionality (Dual Disc Brakes with CBS).
  • Ensure all lights (LED Headlamps) and indicators are working.
  • Confirm mirrors are properly adjusted.

5. Operating Instructions

5.1 Starting the Scooter

  1. Turn the ignition key to the 'ON' position.
  2. The 7" TFT Touchscreen Display will power on.
  3. Press the start button.

5.2 Riding Modes

The Simple ONE offers multiple riding modes to suit different conditions and preferences:

  • Eco Mode: Maximizes range for efficient city commuting.
  • Ride Mode: Balanced performance for daily use.
  • Dash Mode: Enhanced acceleration and speed for dynamic riding.
  • Sonic Mode: Full performance, reaching top speeds of 105 km/h and 0-40 km/h in 2.77 seconds.

Switch between modes using the controls on the handlebar, as indicated on the instrument console.

5.3 Using the Instrument Console and Connectivity

The 7" TFT Touchscreen Display provides real-time information including speed, battery level, range, and selected riding mode. It supports Bluetooth Connectivity and Mobile App Integration for additional features and data.

6. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Simple ONE scooter.

6.1 Daily Checks

  • Check brake fluid levels and brake pad wear.
  • Inspect tires for damage and correct pressure.
  • Ensure all lights and horn are functional.

6.2 Periodic Maintenance

  • Every 3 months or 1,000 km: General inspection, lubrication of moving parts, battery health check.
  • Every 6 months or 3,000 km: Brake system inspection, suspension check, electrical system check.
  • Annually or 6,000 km: Comprehensive service by an authorized Simple Energy service center.

6.3 Cleaning

Use a soft cloth and mild detergent to clean the scooter. Avoid high-pressure washing directly on electrical components or the battery compartment.

7. Troubleshooting

ProblemPossible CauseSolution
Scooter does not start.Low battery, loose battery connection, ignition off.Charge battery, check battery connections, turn ignition key to 'ON'.
Reduced range.Aggressive riding, low tire pressure, aging battery.Ride in Eco mode, check tire pressure, consult service center for battery health.
Brakes feel spongy.Air in brake lines, worn brake pads.Have brakes inspected and serviced by a qualified technician.
Display blank or unresponsive.Software glitch, power issue.Turn off and restart the scooter. If problem persists, contact support.

8. Specifications

FeatureSpecification
Model NameSimple ONE
BrandSimple Energy
Top Speed105 km/h
Max Torque72 Nm
Peak Motor Power8.5 kW
Acceleration (0-40 km/h)2.77 seconds
Battery Pack5 kWh
IDC Range248 km
Charger750W
BrakesDual Disc Brakes with CBS
TiresTubeless Tyres
SuspensionMonoshock Suspension (Rear)
Dimensions (L x W x H)1907 mm x 758 mm x 1163 mm
Boot Space30L
Instrument Console7" TFT Touchscreen Display
ConnectivityBluetooth, Mobile App Integration
Riding ModesEco, Ride, Dash, Sonic
Item Weight137 kg

9. Warranty and Support

The Simple Energy Simple ONE electric scooter comes with a 3-year warranty. For warranty claims, service, or technical support, please contact an authorized Simple Energy service center. Ensure to retain your purchase documentation.

Simpleenergy Private Limited ensures warranty coverage and after-sales support according to standard brand warranty terms. For further assistance, visit the official Simple Energy website or contact customer service.

Simple Energy Company Logo

Figure 9.1: Simple Energy Company Logo.

© 2025 Simple Energy. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.