GXJ 26-inch Counter Height Bar Stools (Set of 2) - Instruction Manual

1. Introduction

Thank you for choosing GXJ Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new counter height bar stools. Please read these instructions carefully before assembly and retain them for future reference.

Image: GXJ 26-inch Counter Height Bar Stools (Set of 2) in a modern kitchen environment.

Important Safety Information

• Always ensure the stool is placed on a stable, even surface.
• Do not exceed the maximum weight limit of 300 pounds (136 kg) per stool.
• Use caution when sitting down or standing up to prevent tipping.
• Keep the area around the stool clear to avoid tripping hazards.
• Regularly check all fasteners to ensure they remain tight.

2. Package Contents

Before beginning assembly, verify that all parts are present and undamaged. If any parts are missing or damaged, please contact customer support.

• 2 x Seat Cushions with Backrests
• 2 x Metal Leg Frames
• Hardware Pack (screws, washers, Allen wrench)
• Instruction Manual

3. Assembly Instructions

Assembly typically takes approximately 10-20 minutes per stool. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Seat to Frame: Align the pre-drilled holes on the underside of the seat cushion with the corresponding holes on the top of the metal leg frame. Insert the provided screws and tighten them securely using the Allen wrench. Ensure precise hole positions for accurate screw placement.
3. Secure Backrest: Attach the backrest to the seat frame using the designated screws. Ensure it is firmly attached for proper support.
4. Check Stability: Once assembled, gently rock the stool to ensure all connections are secure and the stool is stable. If there is any wobbling, re-tighten all screws.

Image: Diagram illustrating the precise hole positions for easy and accurate assembly of the stool components.

Image: Close-up view of the adjustable non-slip floor mat, designed to protect floors and ensure stability. Each foot pad offers a single adjustable range of 0 to 0.39 inches.

4. Operation

These bar stools are designed for comfortable seating at standard counter heights (35"-39" recommended counter height).

Ergonomic Design for Comfort

• The 14.57-inch high backrest provides supportive waist support, promoting a natural and comfortable posture.
• The 18.11-inch wide seat and 3-inch thick high-density sponge cushion offer comprehensive support and comfort for extended periods.
• An integrated footrest allows for relaxed seating.

Image: Diagram detailing the comfortable seating experience, highlighting the 14.57-inch backrest height, 18.11-inch cushion width, and 3-inch seat cushion thickness.

Image: Detailed dimensions of the bar stool, including a 26-inch seat height, 300 lbs maximum load capacity, and overall measurements of 18.11"W x 23.23"D x 37.40"H.

5. Care and Maintenance

Proper care will extend the life and appearance of your GXJ bar stools.

• Cleaning: The premium faux leather upholstery is water-resistant and easy to clean. Wipe with a damp cloth to remove spills and dirt. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: The robust metal base with a matte finish can be cleaned with a soft, damp cloth. Dry immediately to prevent water spots.
• Regular Inspection: Periodically check all screws and connections to ensure they are tight. Re-tighten as necessary to maintain stability.

Image: Close-up view illustrating the high-density foam for durability and elasticity, and the easy-care, water-resistant synthetic leather surface.

6. Troubleshooting

• Stool is Wobbly: Ensure all screws are fully tightened. Sometimes, drilled holes may require slight adjustment during assembly to align correctly. Loosen screws slightly, adjust the frame, and then re-tighten firmly.
• Stool Feels Unstable: Verify that the stool is on a flat, even surface. Adjust the non-slip floor mats on the legs if your floor is uneven. Do not exceed the maximum weight capacity of 300 lbs.
• Difficulty Assembling: Refer to the assembly instructions provided. Ensure you are using the correct hardware for each step. If parts do not align easily, double-check their orientation.

7. Specifications

8. Warranty Information

Your GXJ Bar Stools are backed by a 3-year structural warranty. This warranty covers any quality issues related to the structural integrity of the product. Please retain your proof of purchase for warranty claims.

For warranty service or inquiries, please contact GXJ customer support.

9. Customer Support

If you have any questions, require assistance with assembly, or need to report a quality issue, please contact GXJ customer support through the retailer where the product was purchased or visit the official GXJ brand store online.

We are committed to ensuring your satisfaction with GXJ products.