1. Safety Information
Please read all safety instructions carefully before installing and operating the AVUXOR ADWF Wall-Mounted Fan. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Ensure the power supply voltage matches the fan's requirements (220 Volts).
- Always unplug the fan from the power outlet before cleaning, servicing, or moving it.
- Do not operate the fan with a damaged cord or plug. Contact qualified service personnel for repair.
- Keep hands, hair, clothing, and other objects away from the fan blades during operation.
- Do not use the fan in areas where flammable liquids or gases are stored.
- This fan is designed for wall mounting. Ensure the mounting surface is strong enough to support the fan's weight (9.86 kg).
- The fan is rated IP53 for water and dust resistance, making it suitable for outdoor use. However, avoid direct exposure to heavy rain or submersion.
- Do not allow children to operate the fan unsupervised.
2. Product Overview
The AVUXOR ADWF is a robust wall-mounted fan featuring a brushless DC motor for energy efficiency and powerful airflow. It is designed for both indoor and outdoor applications, offering oscillation and multiple speed settings.
Image 2.1: AVUXOR ADWF Wall-Mounted Fan highlighting BLDC technology and features.
- Brushless DC Motor: Provides energy efficiency, stronger airflow, and a longer lifespan.
- Oscillation: 90-degree oscillation for wide area coverage.
- Tilt Adjustment: Manual 30-degree vertical tilt.
- Speed Settings: 4 adjustable speed levels.
- Durability: IP53 rated for water and dust resistance, suitable for tough environments.
- Material: Constructed from stainless steel for enhanced durability.
- Remote Control: Includes a remote for convenient operation.
3. Parts List
Before beginning installation, ensure all parts are present and undamaged. Refer to the diagram below for identification.
Image 3.1: Exploded view of the AVUXOR ADWF fan components.
- Fan Blades (Aluminum)
- Fully Sealed Motor
- Adjustable Tilt Angle Mechanism
- 2.2m Power Cord
- 4-Speed Controller
- Safety Fan Guard with Fixing Screws
- Wall Mounting Bracket
- Remote Control (not pictured in diagram, but included)
4. Setup Instructions
Follow these steps to properly install your AVUXOR ADWF Wall-Mounted Fan.
- Choose a Mounting Location: Select a sturdy wall surface capable of supporting the fan's weight (approximately 9.86 kg). Ensure there is sufficient clearance for oscillation and tilt.
- Mark Drilling Points: Hold the wall mounting bracket against the chosen surface and mark the positions for drilling holes.
- Drill Holes: Use an appropriate drill bit for your wall type (e.g., masonry bit for brick/concrete) to drill holes at the marked points.
- Secure Mounting Bracket: Insert wall anchors (if necessary) and securely fasten the mounting bracket to the wall using the provided screws. Ensure it is firmly attached.
- Attach Fan to Bracket: Carefully lift the fan assembly and attach it to the secured wall mounting bracket. Follow the specific instructions in the included hardware kit for your model to ensure a secure connection.
- Connect Power: Plug the fan's power cord into a suitable 220 Volt electrical outlet.
- Install Controller: Mount the 4-speed controller in an accessible location near the fan, ensuring the cable reaches.
Image 4.1: Examples of correct and incorrect fan installation methods.
5. Operating Instructions
Your AVUXOR ADWF fan can be operated using the wired controller or the included remote control.
5.1 Power On/Off
- Wired Controller: Turn the rotary switch to position '1' to power on. Turn to '0' to power off.
- Remote Control: Press the power button (usually marked with a circle or 'ON/OFF') to turn the fan on or off.
5.2 Adjusting Fan Speed
The fan has 4 speed settings (Low, Medium, High, Max).
- Wired Controller: Rotate the switch to select speeds 1, 2, 3, or 4.
- Remote Control: Use the speed buttons (often marked '+/-' or with distinct speed levels) to cycle through the 4 speeds.
Image 5.1: The AVUXOR ADWF fan is suitable for various environments including patios, greenhouses, warehouses, and factories.
5.3 Oscillation
The fan offers a 90-degree horizontal oscillation feature.
- Wired Controller: The controller manages oscillation. Refer to the controller's specific markings for oscillation control.
- Remote Control: Press the oscillation button (often marked with a swinging arrow icon) to start or stop the 90-degree oscillation.
5.4 Tilt Adjustment
The fan head can be manually tilted up or down by 30 degrees.
- Manual Adjustment: Gently loosen the tilt adjustment knob on the side of the fan, adjust the fan head to the desired vertical angle, and then tighten the knob securely. Do not force the fan head without loosening the knob.
6. Maintenance
Regular maintenance ensures optimal performance and extends the lifespan of your fan.
- Cleaning:
- Always unplug the fan before cleaning.
- Use a soft, damp cloth to wipe down the exterior surfaces of the fan.
- To clean the fan blades, carefully remove the front safety guard (if designed for user removal) and wipe the blades with a damp cloth. Ensure the blades are dry before reattaching the guard and operating the fan.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the fan's finish or components.
- Storage: If storing the fan for an extended period, clean it thoroughly and store it in a dry, cool place, protected from dust and moisture.
- Inspection: Periodically check the power cord and plug for any signs of damage. Inspect the mounting hardware to ensure it remains secure.
Image 6.1: The AVUXOR ADWF fan is designed to be water and dust resistant, protecting internal components.
7. Troubleshooting
If you encounter issues with your AVUXOR ADWF fan, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | No power supply; Power cord not plugged in; Controller off; Remote control battery dead. | Check power outlet; Ensure power cord is securely plugged in; Turn controller to an ON position; Replace remote control batteries. |
| Fan operates but no oscillation. | Oscillation feature not activated; Mechanical obstruction. | Activate oscillation via controller or remote; Check for any obstructions preventing movement. |
| Fan is noisy. | Loose parts; Fan blades dirty or unbalanced; Fan operating at high speed. | Check for and tighten any loose screws; Clean fan blades and ensure they are balanced; Reduce fan speed if noise is excessive at higher settings. |
| Reduced airflow. | Fan blades are dirty; Fan operating at low speed. | Clean fan blades; Increase fan speed. |
If the problem persists after trying these solutions, please contact AVUXOR customer support.
8. Specifications
| Feature | Detail |
|---|---|
| Brand | AVUXOR |
| Model Number | ADWF |
| Product Dimensions (L x W x H) | 51 x 76.2 x 55.88 cm |
| Weight | 9.86 kg |
| Material | Stainless Steel |
| Color | Black |
| Noise Level | 45 Decibels |
| Power (Wattage) | 60 Watts |
| Voltage | 220 Volts |
| Number of Blades | 3 |
| Special Features | Oscillating, Dust Resistant, Waterproof (IP53 Rated) |
| Mounting Type | Wall Mount |
| Included Components | Remote Control |
Image 8.1: Dimensions and size options for the AVUXOR wall-mounted fan.
9. Warranty and Support
For warranty information or technical support, please refer to the documentation included with your purchase or contact AVUXOR customer service directly. Keep your purchase receipt as proof of purchase.