Movcan RAW3 Smart Bluetooth Helmet with 1080P HD Camera User Manual

1. Introduction

The Movcan RAW3 Smart Bluetooth Helmet is designed to enhance your cycling experience with integrated safety and technology features. This manual provides detailed instructions for setting up, operating, and maintaining your helmet to ensure optimal performance and safety.

Figure 1: Movcan RAW3 Smart Bluetooth Helmet and Accessories

The helmet features a built-in 1080P HD camera, Bluetooth connectivity for calls and music, multi-mode rear LED lights with turn signals, and GPS tracking. It is CPSC Certified for safety and designed for comfort with 14 air vents and a removable cooling liner.

2. Package Contents

Please ensure all items are present in your Movcan RAW3 helmet package:

• Movcan RAW3 Smart Helmet
• Wireless Remote Control
• 2 x 1350mAh Rechargeable Batteries
• Battery Charging Compartment
• 64GB TF Card (pre-installed or included separately)
• USB-C Charging Cable
• USB-C to USB-A Adapter
• Sport Sunglasses
• User Manual
• Storage Bag

Figure 2: Complete Package Contents

3. Setup

3.1. Battery Installation and Charging

The helmet uses removable 1350mAh batteries. Ensure batteries are fully charged before first use.

1. Locate the battery compartment at the rear of the helmet.
2. Slide the latch to open the compartment.
3. Insert a charged battery into the slot, ensuring correct orientation.
4. Close the compartment securely.
5. To charge, place batteries in the provided charging compartment and connect via USB-C cable to a power source.

3.2. TF Card Installation

The helmet supports up to a 128GB TF card (64GB included).

1. Locate the TF card slot near the camera power button.
2. Carefully insert the TF card into the slot until it clicks into place.

Figure 3: Helmet Ports and Buttons

3.3. Remote Control Pairing

The wireless remote controls the helmet's light functions and phone calls.

1. Ensure the helmet is powered on.
2. Press and hold the power button on the remote until the blue indicator light flashes.
3. The remote will automatically pair with the helmet.

Figure 4: Wireless Remote Control

3.4. App Installation and Wi-Fi Connection

Download the 'Roadcam' app from your device's app store (Google Play Store or Apple App Store).

1. Power on the helmet camera by pressing its dedicated power button.
2. Press the Wi-Fi button on the helmet to activate its Wi-Fi hotspot.
3. On your smartphone, go to Wi-Fi settings and connect to the helmet's Wi-Fi network (e.g., RAW3_XXXX). The default password is 12345678.
4. Open the 'Roadcam' app. You should see a live preview from the helmet's camera.

Figure 5: App Live Preview and Controls

3.5. Helmet Fit Adjustment

For optimal safety and comfort, ensure the helmet fits snugly.

1. Place the helmet on your head.
2. Adjust the rear dial to tighten or loosen the internal frame until the helmet feels secure without being too tight.
3. Adjust the chin straps so they form a 'V' shape below your ears and the buckle is centered under your chin.

Figure 6: Head Measurement and Helmet Adjustment

4. Operating Instructions

4.1. Powering On/Off

• Helmet Lights: Press the power button at the rear of the helmet to cycle through light modes (constant, slow flash, fast flash) or turn off.
• Camera: Press and hold the camera power button (located near the front camera) to turn the camera on/off. A voice prompt will confirm.

4.2. Camera Operation

The built-in 1080P HD camera automatically begins recording when powered on.

• Recording: The camera starts recording automatically when powered on. A voice prompt will confirm "Recording started."
• Photos: Briefly press the camera power button to take a photo. A voice prompt will confirm "Photo captured successfully."
• Live View: Connect to the 'Roadcam' app via Wi-Fi for a real-time view from the camera.

Figure 7: 1080P HD Motion Camera

4.3. Bluetooth Functions

Connect your smartphone to the helmet via Bluetooth for hands-free calls and music playback.

• Pairing: Enable Bluetooth on your smartphone and search for 'Movcan RAW3'. Select to pair.
• Calls: Use the remote control to answer/hang up calls. Audio will be routed through the helmet's built-in speakers.
• Music: Play music from your smartphone, and it will stream through the helmet's speakers.

Figure 8: Hands-Free Calling via Bluetooth

4.4. Light System Operation

The helmet features multi-mode rear LED lights for enhanced visibility.

• Rear Lights: Use the button at the rear of the helmet or the remote to cycle through constant, slow flash, and fast flash modes.
• Turn Signals: Use the left/right arrow buttons on the remote to activate corresponding turn signals. Signals will automatically turn off after 12 seconds.
• Hazard Lights: Press the hazard button on the remote to activate hazard lights.

Figure 9: Rear LED Lights and Turn Signals

4.5. GPS Tracking

The built-in GPS module tracks your route, which can be viewed via the 'Roadcam' app.

Figure 10: GPS Tracking via App

5. Maintenance

5.1. Cleaning the Helmet

• Wipe the exterior of the helmet with a soft, damp cloth. Avoid harsh chemicals.
• The 3D cooling liner is removable and washable. Gently detach it, hand wash with mild soap, and air dry completely before reattaching.

Figure 11: Removable 3D Cooling Liner

5.2. Battery Care

• Store batteries in a cool, dry place when not in use.
• Avoid fully discharging batteries to prolong their lifespan.
• Use only the original charging compartment and cable.

6. Troubleshooting

• Helmet not powering on: Ensure the battery is correctly installed and fully charged.
• Camera not recording: Check if the TF card is inserted correctly and has sufficient storage space.
• Wi-Fi connection issues: Ensure the helmet's Wi-Fi is activated and you are connecting to the correct network with the correct password. Try restarting both the helmet and your smartphone.
• Bluetooth pairing issues: Ensure the helmet is in pairing mode and your smartphone's Bluetooth is enabled. Try restarting both devices.
• Remote not responding: Check the remote's battery. Ensure it is powered on and within range of the helmet.

7. Specifications

8. Warranty and Support

The Movcan RAW3 Smart Bluetooth Helmet comes with a 1-Year Warranty.

For product registration, warranty claims, or technical support, please refer to the contact information provided on the warranty card included in your package or visit the official Movcan website.

Company: MOVCAN LIMITED
Address: 512 W 2nd St, Casper, WY 82601, US
Email: support@movcan-bike.com
Website: movcan-bike.com

9. Official Product Videos