Important Safety Instructions
Please read all instructions carefully before using your FAYKONCEN Wearable Heated Blanket. Failure to follow these instructions may result in fire, electric shock, or injury.
- Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
- Do not use if the blanket is wet.
- Do not use if the power cord or controller is damaged.
- Do not use pins or other metallic objects with this blanket.
- Do not use with alcohol, narcotics, or any medication that may cause drowsiness.
- Always unplug the blanket when not in use.
- Do not dry clean. Dry cleaning solvents may damage the insulation of the heating element.
- Do not iron the blanket.
- Do not use bleach.
- Ensure the controller is never covered during use to prevent overheating.
- Keep pets away from the blanket to prevent damage to the heating elements.
- This product is for indoor use only.
- ETL and FCC Certified for safety.
Setup Guide
- Unpack: Carefully remove the heated blanket from its packaging.
- Inspect: Examine the blanket, power cord, and controller for any signs of damage. Do not use if any damage is present.
- Connect Controller: Locate the connection port on the blanket. Firmly plug the controller cable into this port. Ensure a secure connection.
- Placement: Lay the blanket flat on a sofa, bed, or chair. Ensure there are no kinks or folds in the heating wires.
- Power Connection: Plug the power cord into a standard 120V AC electrical outlet.
Image: The FAYKONCEN Wearable Heated Blanket (Light Grey, 52" x 72") laid out, showing its full size and design. This image illustrates the blanket's overall appearance and dimensions, which are 52 inches by 72 inches.
Operating Instructions
Controller Functions:
- Power Button: Press to turn the blanket ON/OFF.
- Heat Level Adjustment: Use the temperature buttons (up/down arrows) to select one of 6 heat levels (86°F / 92°F / 96°F / 102°F / 107°F / 113°F). The current heat level will be displayed on the controller.
- Quick Heat Function: Press the "Quick Heat" button (often indicated by a wavy lines icon) to rapidly heat the blanket to its maximum temperature. This function typically runs for 1 hour.
- Timer Setting: Use the timer buttons (clock icon with up/down arrows) to set the automatic shut-off timer from 1 to 12 hours. The remaining time will be displayed.
Image: A user operating the FAYKONCEN Wearable Heated Blanket with the attached controller. The image highlights the digital display and control buttons for adjusting heat levels and timer settings, showing the blanket's quick heat function and 6 heating levels.
Wearing the Blanket:
The blanket is designed for versatile use, either as a traditional throw or as a wearable garment.
- Sleeves: Insert your arms into the integrated sleeves for full upper body warmth and freedom of movement.
- Foot Pockets: Place your feet into the dedicated foot pockets at the bottom of the blanket for added warmth to your lower extremities.
- Buttons: Use the horn buttons to secure the blanket around your shoulders, converting it into a heated robe.
Image: A woman comfortably wearing the FAYKONCEN heated blanket, demonstrating the use of its sleeves and foot pockets while relaxing on a sofa. This image showcases the wearable design and the cozy faux fur and sherpa material.
Care and Maintenance
Proper care ensures the longevity and safe operation of your heated blanket.
- Disconnect Power: Always unplug the power cord from the wall outlet and detach the controller from the blanket before cleaning.
- Machine Washable: The blanket is machine washable. Use a gentle cycle with cold water (100°F / 37°C max).
- Detergent: Use a mild detergent. Do not use bleach.
- Drying: Tumble dry on low heat or air dry. Ensure the blanket is completely dry before reconnecting the controller and using it.
- Do Not Iron: Do not iron the blanket as this can damage the heating elements.
- Do Not Dry Clean: Dry cleaning solvents can damage the insulation.
Image: A FAYKONCEN Wearable Heated Blanket being placed into a washing machine, with an inset showing the detachable controller. This illustrates the ease of cleaning and the removable power cord for safe washing.
Troubleshooting Guide
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Not plugged in correctly; Controller not connected securely; Power outlet malfunction; Blanket folded or bunched up. | Ensure power cord is fully plugged into outlet. Check controller connection to blanket. Test outlet with another device. Lay blanket flat and ensure no folds. |
| Controller display not working | Power issue; Controller malfunction. | Check power connection. Try unplugging and re-plugging the controller. If issue persists, contact customer support. |
| Blanket heats unevenly | Heating elements are bunched or folded. | Lay the blanket completely flat, ensuring no areas are folded or bunched. |
| Automatic shut-off too soon | Timer set for a shorter duration; Overheat protection activated. | Adjust the timer setting on the controller. If overheat protection activates, unplug the blanket, let it cool for 30 minutes, then try again. Ensure proper ventilation. |
Product Specifications
- Model Number: ZQ06B-B5272
- Brand: FAYKONCEN
- Material: Faux Fur & Sherpa (100% Polyester)
- Color: Light Grey
- Dimensions: 52" x 72"
- Heat Levels: 6 (86°F / 92°F / 96°F / 102°F / 107°F / 113°F)
- Timer Settings: 1-12 hours
- Special Features: Wearable design with sleeves and foot pockets, Quick Heat function, Detachable controller
- Safety Certifications: ETL, FCC Certified
- Product Care: Machine Washable (gentle cycle, cold water), Do Not Iron, Do Not Dry Clean
Warranty and Support
For warranty information or customer support, please refer to the contact details provided with your purchase or visit the official FAYKONCEN website.
Keep your purchase receipt as proof of purchase for any warranty claims.