MOSEWORTH M12100

MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery User Manual

Model: M12100 | Brand: MOSEWORTH

1. Introduction

This manual provides essential information for the safe and efficient use of your MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery. Please read this manual thoroughly before installation and operation to ensure optimal performance and longevity of your battery.

Safety Warning: Always handle batteries with care. Ensure proper ventilation and use appropriate protective gear. Do not short-circuit the terminals. Do not disassemble or expose to extreme temperatures or fire.

MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery

Figure 1: MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery

2. Product Features

The MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery is designed for high performance and durability, offering numerous advantages over traditional lead-acid batteries:

  • Advanced 100A BMS: Built-in Battery Management System provides comprehensive protection against overcharge, over-discharge, short circuits, and overheating.
  • Low-Temperature Protection: Features low-temperature cutoff (-4°F/-20°C) and high-temperature protection (140°F/60°C) for safe operation in various conditions.
  • Fast Charging: Charges significantly faster than lead-acid batteries, achieving a full charge in approximately 2 hours with a 600W solar system.
  • Compact and Lightweight: With dimensions of 13x6.77x8.43 inches, it offers a compact footprint and lighter weight compared to lead-acid alternatives.
  • Expandable & Versatile: Can be connected in series (up to 4 batteries for 48V) or unlimited in parallel for increased capacity, suitable for a wide range of applications.
  • Long Lifespan: Constructed with premium Grade A LiFePO4 cells, providing 10+ years of reliable power with over 5000 deep cycles.
  • Eco-Friendly: A more sustainable and environmentally conscious power solution.
High Performance Lithium Battery with 100A BMS, Grade A Cells, IP65 Waterproof & Dust-proof

Figure 2: High Performance Lithium Battery with 100A BMS, Grade A Cells, IP65 Waterproof & Dust-proof

Built-in 100A BMS with Over-Discharge, Over-Current, Short Circuit, Overcharge, and High/Low Temperature Protection

Figure 3: Built-in 100A BMS with comprehensive protection features

Low-Temperature Cutting off Protection for LiFePO4 Battery

Figure 4: Low-Temperature Protection ensures safe operation in cold environments.

Comparison of LiFePO4 Battery vs. Lead Acid Battery showing lifespan and depth of discharge

Figure 5: LiFePO4 batteries offer superior lifespan and depth of discharge compared to lead-acid batteries.

3. Package Contents

Upon opening the package, please verify that all items are present and undamaged:

  • 1 x MOSEWORTH 12V 100Ah LiFePO4 Lithium Battery
  • User Manual (this document)

4. Specifications

AttributeValue
BrandMOSEWORTH
ModelM12100
Voltage12V
Capacity100Ah
BMSBuilt-in 100A BMS
Cycle Life5000+ cycles (10+ years)
Low-Temp Cutoff-4°F (-20°C)
High-Temp Protection140°F (60°C)
Dimensions (L x W x H)13 x 6.77 x 8.43 inches
Recommended Charging Voltage14.6V

5. Setup

5.1 Initial Inspection

Before connecting the battery, inspect it for any visible damage. Ensure the terminals are clean and free of corrosion. Confirm the battery dimensions fit your intended application.

Precision-fit Dimensions of MOSEWORTH 12V 100Ah LiFePO4 Battery with M8 bolts

Figure 6: Precision-fit dimensions for easy integration into various systems.

5.2 Connection Guidelines

Always use appropriate cables and connectors for your battery system. Ensure all connections are secure to prevent arcing and potential damage. For marine or wet environments, it is highly recommended to use a waterproof battery compartment.

5.2.1 Parallel Connection

For increased capacity (Ah), connect batteries in parallel. Connect all positive terminals together and all negative terminals together. This maintains the system voltage while increasing the total available current.

Video 1: This video demonstrates various aspects of MOSEWORTH LiFePO4 batteries, including parallel and series connection diagrams. The parallel connection segment illustrates how to connect multiple batteries to increase overall capacity while maintaining the same voltage.

5.2.2 Series Connection

For increased voltage (V), connect batteries in series. Connect the positive terminal of one battery to the negative terminal of the next. You can connect up to 4 batteries in series to achieve a 48V system.

Video 2: This video demonstrates various aspects of MOSEWORTH LiFePO4 batteries, including parallel and series connection diagrams. The series connection segment illustrates how to connect multiple batteries to increase the overall voltage for higher power applications.

5.2.3 Solar Panel Connection

The battery is compatible with solar charging systems. Ensure you use an appropriate MPPT (Maximum Power Point Tracking) charge controller to regulate the voltage and current from your solar panels to the battery. This optimizes charging efficiency and protects the battery.

Three ways to charge the LiFePO4 battery: LiFePO4 Charger, Solar Panel, and Generator

Figure 7: The battery can be charged using a dedicated LiFePO4 charger, solar panels, or a generator.

6. Operating Instructions

6.1 Charging

Use a LiFePO4 compatible charger with a recommended voltage of 14.6V. Avoid using lead-acid chargers as they may damage the battery. The battery's internal BMS will manage the charging process, but using the correct charger is crucial for optimal performance and safety.

6.2 Discharge

The battery is designed for deep cycling, allowing for 100% depth of discharge. The BMS will protect the battery from over-discharge. If the battery is fully discharged, recharge it within 12 hours to maintain optimal performance and extend its lifespan.

6.3 Applications

This battery is ideal for various applications requiring reliable and long-lasting power. It is suitable for:

  • Trolling Motors (30-70 lb thrust)
  • RV and Camper Power Systems
  • Boat and Marine Applications (with waterproof enclosure)
  • Solar Energy Storage Systems
  • Emergency Backup Power
  • Off-Grid Living Solutions

Note: This battery is not designed for use as a starting battery for vehicles or for golf cart applications.

Various applications for the LiFePO4 battery including RV, Boat/Marine, Camping, and Trolling Motor

Figure 8: The MOSEWORTH LiFePO4 battery is suitable for a wide range of recreational and power storage applications.

7. Maintenance and Storage

Proper maintenance ensures the longevity and performance of your LiFePO4 battery:

  • Regular Inspection: Periodically check battery terminals for cleanliness and tightness.
  • Cleaning: Keep the battery clean and dry. Use a damp cloth to wipe down the exterior.
  • Temperature: Store the battery in a cool, dry place, away from direct sunlight and extreme temperatures.
  • Long-Term Storage: If storing the battery for an extended period, ensure it is charged to approximately 50% state of charge. Recharge every 3-6 months to prevent self-discharge.
  • Waterproof Enclosure: For marine or wet environments, always use a waterproof battery box to protect the battery from moisture.

8. Troubleshooting

This section addresses common issues you might encounter with your battery. If the problem persists, please contact customer support.

ProblemPossible CauseSolution
Battery not chargingIncorrect charger type; Loose connections; BMS protection activated; Charger malfunctionEnsure LiFePO4 compatible charger is used; Check all cable connections; Allow battery to cool if overheated; Test charger with another device or replace.
Battery not providing powerBattery fully discharged; BMS protection activated (over-discharge, short circuit); Loose connections; Device malfunctionRecharge battery immediately; Check for short circuits or excessive load; Secure all connections; Test device with another power source.
Battery overheatingExcessive discharge/charge current; Poor ventilation; High ambient temperatureReduce load or charging current; Ensure adequate airflow around the battery; Move battery to a cooler environment.
Reduced capacity/runtimeBattery not fully charged; Aging battery; High discharge rate; Low temperature operationEnsure full charge cycles; Consider battery replacement if very old; Reduce load; Note that capacity is reduced in very cold conditions.

9. Warranty and Customer Support

MOSEWORTH stands behind the quality of its products. Your 12V 100Ah LiFePO4 Lithium Battery is backed by a 5-year warranty, ensuring peace of mind and reliable performance.

For any questions, technical assistance, or warranty claims, please contact MOSEWORTH customer support. Our dedicated team is available 24/7 to provide fast and effective solutions.

Contact Us:

  • Via Amazon: Use the messaging system on the Amazon product page or your order details.
  • Visit the MOSEWORTH Store: MOSEWORTH Official Store

© 2025 MOSEWORTH. All rights reserved.