EDIFOLLY Cordless Ankle Heating Pads User Manual

1. Important Safety Information

Please read all instructions carefully before using the EDIFOLLY Cordless Ankle Heating Pads. Retain this manual for future reference.

• Do not use while sleeping.
• Do not use on sensitive skin areas or in the presence of poor circulation.
• Consult a physician before use if you have any medical conditions, including diabetes, heart disease, or nerve damage.
• Never charge the ankle brace while it is in use. The device cannot be turned on during charging.
• Keep out of reach of children.
• Do not disassemble or modify the device.
• Discontinue use if you experience discomfort, pain, or skin irritation.

2. Product Overview

The EDIFOLLY Cordless Ankle Heating Pads are designed to provide targeted heat and vibration therapy for ankle discomfort. This product offers a portable and adjustable solution for daily care, post-activity recovery, and general ankle pain relief.

This image displays the EDIFOLLY Cordless Ankle Heating Pads in use, highlighting the integrated control panel and the visible warmth from the heating elements.

Key Features:

• Cordless Design: Offers unrestricted mobility.
• Rechargeable Battery: Equipped with a 2000mAh battery, providing up to 4-5 sessions (15 minutes each) on a 2-hour charge.
• Adjustable Fit: Designed to fit both left and right ankles with adjustable straps.
• 3 Vibration Modes: Daily Maintenance, Post-Activity Care, and Ankle Discomfort.
• 3 Heat Levels: Precise temperature control at 118.4°F (48°C), 127.4°F (53°C), and 136.4°F (58°C).
• 15-Minute Auto Shut-Off: Prevents overuse and ensures safety.
• Breathable Fabric: Comfortable, sweat-wicking, wind-resistant, and non-slip.

3. Setup and Charging

Charging the Device:

• Connect the provided USB cable to the charging port on the ankle heating pad.
• Connect the other end of the USB cable to a compatible USB charger (not included).
• A white light will flash during charging.
• The white light will remain solid when fully charged.
• A full charge typically takes 2 hours and provides up to 1 hour of use (4-5 sessions of 15 minutes).
• Important: Do not use the device while it is charging.

Wearing the Ankle Heating Pad:

This diagram illustrates the simple three-step process for correctly wearing the ankle heating pad: first, unfold the brace with the wide opening in front; second, adjust the Velcro straps for a secure fit; and third, long-press the power button to activate the device.

1. Unfold the ankle heating pad, ensuring the wide opening is positioned in front of your ankle.
2. Place your foot through the opening and position the pad around your ankle.
3. Adjust the Velcro straps to achieve a snug and comfortable fit. The pad is designed to fit both left and right ankles.
4. Ensure the control panel is easily accessible.

This image demonstrates the versatility of the ankle heating pad, confirming its suitability for both left and right ankles and its adjustable design for a secure, 360-degree wrap-around fit.

4. Operating Instructions

Power On/Off:

• To turn on: Long press the power button (usually indicated by a circle with a vertical line) on the control panel for 2 seconds. The display will light up.
• To turn off: Long press the power button again for 2 seconds.

Adjusting Heat Levels:

• Press the heat button (usually indicated by a flame icon) to cycle through the three temperature levels:
• Level 1: 48°C (118.4°F)
• Level 2: 53°C (127.4°F)
• Level 3: 58°C (136.4°F)

This image highlights the three adjustable heat levels of the ankle heating pad, providing precise temperature control for optimal comfort and therapeutic benefit.

Adjusting Vibration Modes:

• Press the vibration button (usually indicated by a wavy line icon) to cycle through the three vibration modes:
• Mode 1: Daily Maintenance (Gentle care for regular use)
• Mode 2: Post-Activity Care (Ideal after exercise or strenuous movement)
• Mode 3: Ankle Discomfort (Targets soreness and tension)

This image details the three distinct vibration intensity modes available on the ankle heating pad, designed for daily care, post-activity recovery, and targeted relief for ankle discomfort.

Auto Shut-Off Feature:

The device is equipped with a 15-minute auto shut-off timer to prevent overuse and ensure safety. After 15 minutes of continuous operation, the device will automatically turn off.

Product Demonstration Video:

5. Maintenance

Cleaning:

• Ensure the device is turned off and unplugged before cleaning.
• Wipe the surface of the ankle heating pad with a soft, damp cloth.
• Do not immerse the device in water or any other liquid.
• Do not use abrasive cleaners or solvents.
• Allow the device to air dry completely before storing or next use.

Storage:

• Store the ankle heating pad in a cool, dry place.
• Avoid direct sunlight and extreme temperatures.
• Keep the device away from sharp objects to prevent damage to the fabric or internal components.

6. Troubleshooting

Common Issues and Solutions:

7. Specifications

8. Warranty and Support

For warranty information or product support, please contact EDIFOLLY customer service through the retailer where the product was purchased or visit the official EDIFOLLY website. Please have your model number (B0FDG7WQBM) and purchase date available when contacting support.