XAMATTS F63 16-inch Oscillating Misting Pedestal Fan User Manual

1. Introduction

Thank you for choosing the XAMATTS F63 16-inch Oscillating Misting Pedestal Fan. This product combines the functionality of a powerful fan with an independent humidifier to provide a comfortable environment. It features 4 speed settings, 3 operating modes, a 1-7 hour timer, and a 4-liter water tank for continuous misting. Please read this manual thoroughly before use to ensure safe and optimal operation.

Figure 1: XAMATTS F63 Misting Pedestal Fan Overview

2. Safety Instructions

To reduce the risk of fire, electric shock, or injury, always follow these basic safety precautions:

• Read all instructions before using this appliance.
• Do not operate any fan with a damaged cord or plug. Discard fan or return to an authorized service facility for examination and/or repair.
• Do not run cord under carpeting. Do not cover cord with throw rugs, runners, or similar coverings. Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Always unplug the fan when moving it, cleaning, or when not in use.
• Do not immerse the fan in water or other liquids.
• Ensure the water tank is securely placed and the anti-dry burn feature is functioning correctly to prevent overheating when the tank is empty.
• Keep children and pets away from the fan, especially when it is operating.
• Use only as described in this manual.

3. Package Contents

Verify that all components are present upon unpacking:

• Fan Head (Grille and Blades)
• Main Body/Motor Unit
• Stand Tube
• Base
• 5 Wheels
• 4L Water Tank
• Water Tank Cover
• Remote Control
• User Manual

4. Setup

Follow these steps to assemble your XAMATTS F63 Misting Pedestal Fan:

1. Install Wheels: Attach the 5 wheels to the bottom of the fan base.
2. Install Stand Tube: Remove the screw from the base, insert the stand tube into the base, align the screw holes, and tighten the screws to secure it.
3. Connect Body to Stand Tube: Connect the internal wires of the main body to the stand tube's mating line. Carefully slide the main body onto the stand tube. Tighten the screws on the back of the body.
4. Install Grilles and Fan Blades:
   • Remove the nut from the motor shaft.
   • Set up the back grille, secure it, and tighten the nuts.
   • Install the fan blade and gasket, then secure and tighten.
   • Before installing the front grille, align the water pipes with the body's water pipes.
   • Install the front grille and secure it.
   • Install the water pipe finally.
5. Install Water Tank: Place the 4L water tank into the base and cover it with the lid. Ensure the misting hose is properly connected.

Figure 2: Fan Dimensions and Components

5. Operating Instructions

The XAMATTS F63 fan offers multiple settings for customized comfort. Use the control panel on the unit or the remote control.

5.1 Power On/Off

Press the power button (⏻) to turn the fan on or off.

5.2 Speed Settings

The fan has 4 speed settings: Low, Medium, High, and Breeze. Press the fan speed button (❂) to cycle through the speeds.

Figure 3: Fan Modes and Speed Settings

5.3 Operating Modes

Choose from 3 modes: Normal, Nature, and Sleep. Press the mode button (🌙, 🌲, ❂ icons on display) to select your preferred airflow pattern.

5.4 Oscillation

Activate the 70° oscillation feature by pressing the oscillation button (↻) for wide area coverage.

Figure 4: Oscillation and Remote Control

5.5 Misting Function (Humidifier)

The 4L independent humidifier provides up to 20 hours of continuous mist. Press the mist button (💧) to turn the misting function on or off. Adjust the mist output using the dedicated knob on the humidifier base or the remote control.

Figure 5: Humidifier Features

5.6 Timer Function

Set the fan to operate for 1 to 7 hours using the timer button (⏰). The fan will automatically turn off after the set duration.

5.7 Remote Control

The included remote control allows you to adjust all settings (power, speed, mode, oscillation, mist, timer) from a distance of up to 3.3 feet.

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your fan:

• Cleaning: Always unplug the fan before cleaning. Use a soft, damp cloth to wipe down the exterior surfaces. Do not use abrasive cleaners or solvents.
• Grille Cleaning: The blade cover is detachable for easy cleaning of the fan blades. Ensure the fan is completely off and unplugged before removing the grille.
• Water Tank Cleaning: Regularly clean the 4L water tank to prevent mineral buildup and maintain mist quality. The top-fill design and detachable tank make cleaning convenient.
• Storage: When not in use for extended periods, store the fan in a cool, dry place.

7. Troubleshooting

If you encounter issues with your fan, refer to the following common problems and solutions:

8. Specifications

Figure 6: Internal Components and Performance

9. Warranty & Support

For warranty information or technical support, please refer to the contact details provided on the product packaging or the official XAMATTS website. Keep your purchase receipt as proof of purchase.