Introduction
This manual provides instructions for the Axyuada 14 Pack White Shelf Support Pins. These pins are designed as direct replacements for specific IKEA shelf support pins and are compatible with various IKEA furniture systems. Please read these instructions carefully before installation to ensure proper use and stability.
Image: A complete set of 14 white plastic shelf support pins, each featuring an integrated screw design.
Product Overview
The Axyuada Shelf Support Pins are crafted from durable white plastic with an integrated metal screw, providing reliable support for shelves and drawers. They are specifically designed to fit standard 5mm pre-drilled holes found in compatible furniture.
Key Features:
- Direct Replacement: Compatible with IKEA shelf support pins Part #101558 and #10077788.
- Broad Compatibility: Suitable for IKEA PAX wardrobes, KOMPLEMENT, KLEPPESTAD, RAKKESTAD shelving systems, and other furniture with 5mm holes.
- Durable Construction: Made from sturdy, heavy-duty white plastic for long-lasting performance.
- Easy Installation: Integrated screw design allows for tool-free insertion into pre-drilled holes.
- Quantity: Each package contains 14 shelf support pins.
Image: Detailed diagram showing the dimensions of the shelf support pins, including peg length (6mm), peg diameter (5mm), and overall pin dimensions (12mm x 12mm x 11mm).
Installation Instructions
Follow these steps to properly install the Axyuada Shelf Support Pins:
- Identify Hole Location: Locate the pre-drilled 5mm holes in your furniture where the shelf or drawer will be installed. Ensure the holes are clean and free of debris.
- Insert Pin: Take one shelf support pin. The integrated screw acts as a guide. Gently push the peg end of the pin into the pre-drilled hole.
- Secure Pin: Once the peg is inserted, apply firm, even pressure to fully seat the pin. The screw will engage with the wood or particle board, providing a secure fit. No additional tools are typically required for insertion.
- Verify Firmness: After insertion, gently tug on the pin to ensure it is firmly seated and does not wobble.
- Repeat for all Pins: Install the required number of pins for your shelf or drawer, typically four for a standard shelf.
- Place Shelf/Drawer: Carefully place your shelf or drawer onto the installed support pins, ensuring it rests evenly and securely.
Image: Visual guide demonstrating the three key installation steps: 1. Marking and punching holes (if not pre-drilled), 2. Tightening with a screwdriver (for initial engagement if needed, though often hand-pressed), and 3. Checking for firmness.
Image: Diagram illustrating the insertion of shelf support pins into the pre-drilled holes of a cabinet side panel, indicating the direction of installation.
Operating (In Use)
Once installed, the Axyuada Shelf Support Pins provide a stable and secure foundation for your shelves or drawers. They are designed to bear the weight of typical household items when used within the furniture's recommended load limits.
- Ensure the weight on the shelf is distributed evenly.
- Avoid placing excessive weight on shelves, as this can compromise the integrity of the pins and the furniture structure.
- Periodically check the stability of your shelves and the firmness of the pins.
Image: An interior view of a cabinet showing multiple shelves securely held in place by the white shelf support pins.
Maintenance
These shelf support pins require minimal maintenance. Regular checks can help ensure their longevity and the safety of your furniture.
- Cleaning: If necessary, wipe the pins with a soft, damp cloth. Avoid harsh chemicals that may damage the plastic.
- Inspection: Periodically inspect the pins for any signs of wear, cracking, or bending. Replace any damaged pins immediately.
- Re-seating: If a pin feels loose, remove the shelf, gently remove the pin, and re-insert it firmly into the hole. If it remains loose, the hole may be worn, and a new hole or alternative support method might be needed.
Troubleshooting
Here are solutions to common issues you might encounter:
| Problem | Solution |
|---|---|
| Pin does not fit into the hole. | Ensure the hole diameter is 5mm. These pins are designed for 5mm holes. Do not force the pin, as this may damage the pin or the furniture. |
| Shelf is wobbly or unstable. | Check that all pins are fully seated and firm in their respective holes. Ensure the shelf is placed correctly on all pins. Verify that the furniture itself is stable and on a level surface. |
| Pin breaks during installation or use. | Replace the broken pin with a new one from the pack. Avoid applying excessive force during installation. Ensure the shelf load does not exceed the furniture's recommended weight capacity. |
Specifications
| Attribute | Detail |
|---|---|
| Product Name | Axyuada 14 Pack White Shelf Support Pins |
| Model Numbers | #101558, #10077788 (IKEA replacement) |
| Material | Plastic, Metal |
| Color | White |
| Quantity | 14 pieces per pack |
| Product Dimensions (each pin) | Approximately 1 x 1 x 1 inches (25.4 x 25.4 x 25.4 mm) |
| Item Weight (total) | 0.704 ounces (approximately 20 grams) |
| Manufacturer | Axyuada |
Warranty and Support
For any questions, concerns, or support regarding your Axyuada Shelf Support Pins, please contact the manufacturer directly. Specific warranty details may vary; please refer to the product packaging or the seller's information for the most accurate warranty policy.
Manufacturer: Axyuada