Generic Gray Steel Sliding Door Cabinet

1. Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your new Generic Gray Steel Sliding Door Cabinet, model Medium336430. Please read this manual thoroughly before assembly and use to ensure proper function and safety. Keep this manual for future reference.

Figure 1: Front view of the Gray Steel Sliding Door Cabinet. The cabinet features two sliding doors with handles and a central lock mechanism.

2. Safety Information

Always follow basic safety precautions when assembling and using this product to reduce the risk of injury or damage.

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or damaged.
• Assembly requires two people. Attempting to assemble alone may result in injury or damage to the product.
• Place the cabinet on a flat, stable, and level surface to prevent tipping.
• Do not exceed the maximum weight capacity of 198.4 lbs (90 kg). Distribute weight evenly on shelves.
• Keep small parts away from children during assembly to prevent choking hazards.
• This cabinet is designed for indoor use only.

3. Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, contact customer support.

• Cabinet frame components (top, bottom, sides, back panels)
• 2 Sliding Doors
• 2 Adjustable Shelves
• Lock mechanism with keys
• Assembly hardware (screws, bolts, shelf pins, etc.)
• Assembly instructions (this manual)

Figure 2: Interior view of the cabinet, illustrating the two adjustable shelves and the multiple holes for shelf height adjustment.

4. Setup and Assembly

Assembly is required for this cabinet. It is recommended that two people perform the assembly process.

4.1 Tools Required (Not Included)

• Phillips head screwdriver
• Hammer (optional, for dowels if applicable)

4.2 Assembly Steps

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface (e.g., a blanket or cardboard) to prevent scratches. Verify all parts against the package contents list.
2. Assemble Frame: Attach the side panels to the bottom panel using the provided hardware. Ensure all connections are secure.
3. Install Back Panel: Slide or attach the back panel into the designated grooves or fasten it to the frame.
4. Attach Top Panel: Secure the top panel to the assembled frame.
5. Insert Shelf Pins: Determine the desired height for your adjustable shelves. Insert the shelf pins into the corresponding holes on the side panels.
6. Place Shelves: Carefully place the adjustable shelves onto the installed shelf pins.
7. Install Sliding Doors: Insert the sliding doors into their respective tracks (top and bottom). Ensure they slide smoothly.
8. Attach Handles and Lock: Secure the handles to the sliding doors. Install the cam lock mechanism into the pre-drilled hole on one of the doors and test its function with the provided keys.

Figure 3: Cabinet dimensions for planning placement. Width: 90 cm, Height: 90 cm, Depth: 40 cm.

Figure 4: Rear view of the cabinet, indicating potential wall-mounting points for added stability (mounting hardware not included).

5. Operating Instructions

5.1 Sliding Doors

To open or close the cabinet, gently slide the doors along their tracks using the handles. Ensure no obstructions are in the path of the doors.

5.2 Locking Mechanism

The cabinet is equipped with a cam lock for security. To lock, ensure the doors are fully closed, insert the key into the lock, and turn it clockwise until the doors are secured. To unlock, insert the key and turn counter-clockwise.

Figure 5: Detail of the cam lock and accompanying keys for securing the cabinet contents.

5.3 Adjusting Shelves

The two shelves are height-adjustable. To adjust a shelf:

1. Empty the shelf completely.
2. Carefully lift the shelf and remove the shelf pins from their current holes.
3. Re-insert the shelf pins into the desired new height holes on both sides, ensuring they are level.
4. Place the shelf back onto the pins, ensuring it is stable before placing items on it.

6. Maintenance

Regular maintenance will help prolong the life and appearance of your cabinet.

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, which can damage the finish.
• Inspection: Periodically check all screws and fasteners to ensure they are tight. Re-tighten if necessary.
• Door Tracks: Keep the sliding door tracks free of dust and debris to ensure smooth operation.
• Weight Distribution: Always distribute weight evenly across shelves to prevent warping or structural stress.

7. Troubleshooting

If you encounter issues with your cabinet, refer to the following common problems and solutions.

8. Specifications

Detailed specifications for the Generic Gray Steel Sliding Door Cabinet.

• Color: Gray
• Shape: Rectangular
• Material: Metal Steel
• Indoor/Outdoor: Indoor Only
• Number of Doors: 2
• Room: Living Room, Office
• Maximum Weight Capacity: 198.4 lbs (90 kg)
• Dimensions (W x L x H): 15.7 x 35.4 x 35.4 inches (40 x 90 x 90 cm)
• Weight: 50.7 lbs (23 kg)
• Assembly Required: Yes
• Recommended Number of People for Assembly: 2

9. Warranty and Support

This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation provided at the time of purchase or contact the retailer.

For technical support, missing parts, or warranty claims, please contact your point of purchase or the manufacturer, vidaXL.

• Manufacturer: vidaXL
• Brand: Generic