SSCYHT 14.4V Lithium-Ion Replacement Battery User Manual

1. Introduction

This manual provides essential information for the safe and effective use of your SSCYHT 14.4V Lithium-Ion Replacement Battery. This battery is designed for use in compatible robot vacuum cleaners and other devices requiring a 14.4V power source with a JST port and a maximum 50W motor kit. Please read this manual thoroughly before installation and operation.

Image 1.1: Two SSCYHT 14.4V Lithium-Ion Replacement Batteries. Each battery features a blue PVC heat shrink tubing and a red JST connector with red and black wires.

2. Safety Information

Observe the following safety precautions to prevent injury or damage to the battery and connected devices:

• Charger Compatibility: Only use a 16.8V 2A charger for recharging this battery. Using an incompatible charger may cause damage, overheating, or fire.
• Temperature Range: Store and operate the battery within a temperature range of 0℃ to 50℃ (32°F to 122°F). Avoid extreme temperatures.
• Physical Protection: The battery features a PVC outer layer that offers a degree of water resistance. However, avoid submerging the battery in water or exposing it to excessive moisture.
• Integrated Protection: The battery is equipped with an intelligent Battery Management System (BMS) to protect against short-circuits, overcurrents, overcharging, and over-discharging. Do not attempt to bypass or modify the BMS.
• Disposal: Dispose of used batteries according to local regulations. Do not incinerate or puncture batteries.
• Children: Keep batteries out of reach of children.

Image 2.1: Core Protection Functions. This diagram shows the battery's built-in protections, including over-voltage, short circuit, over-current, over-discharge, and over-charge protection, contributing to long-lasting durability.

3. Package Contents

Depending on your purchase, your package will contain:

• SSCYHT 14.4V Lithium-Ion Battery (1 or 2 units, as specified at purchase)

4. Setup and Installation

This battery is designed for easy replacement in compatible devices such as robot vacuum cleaners (e.g., V3s, DF43). Ensure your device uses a 14.4V battery and has a JST port for connection.

1. Power Off Device: Before installation, ensure your device is completely powered off and unplugged from any power source.
2. Locate Battery Compartment: Refer to your device's original manual to locate and open the battery compartment.
3. Remove Old Battery: Carefully disconnect the existing battery from its JST port and remove it.
4. Connect New Battery: Connect the JST male interface of the SSCYHT replacement battery to the corresponding JST female port in your device. Ensure the connection is secure.
5. Position Battery: Place the new battery securely within the compartment. The compact size (133x37x22mm) is designed for broad compatibility.
6. Close Compartment: Close the battery compartment cover.

Image 4.1: JST Male Interface. This image highlights the red JST male connector, which is used to connect the battery to compatible devices.

Image 4.2: Application Example. This image illustrates the battery's application, showing it connected and installed within a robot vacuum cleaner, demonstrating its compatibility and fit.

5. Operating Instructions

Once installed, the battery powers your device. For optimal performance and longevity, follow these guidelines:

• Initial Charge: It is recommended to fully charge the battery before its first use.
• Charging Process: Connect the battery to a 16.8V 2A charger. The typical charge time is 1-2 hours. Do not leave the battery charging unattended for extended periods.
• Discharge: Allow the battery to discharge during normal device operation. Avoid completely draining the battery frequently, as this can reduce its overall lifespan.
• Compatibility: This battery is suitable for devices with a maximum motor kit power of 50W.

6. Maintenance

Proper maintenance ensures the longevity and performance of your battery:

• Storage: If storing the battery for an extended period, ensure it is partially charged (around 50-70%) and stored in a cool, dry place within the recommended temperature range of 0℃ to 50℃.
• Regular Use: For best results, use and recharge the battery regularly.
• Cleaning: Keep the battery and its connectors clean and free from dust or debris. Use a dry, soft cloth for cleaning.
• Service Life: The battery is designed to retain ≥ 60% of its capacity after 500 deep charge/discharge cycles, typically lasting 3-5 years under normal use.

7. Troubleshooting

If you encounter issues with your battery, consider the following:

• Battery Not Charging:
  • Ensure the charger is correctly connected and is a 16.8V 2A model.
  • Check for any visible damage to the battery or charger cables.
  • Verify the power outlet is functional.
• Device Not Powering On:
  • Confirm the battery is fully charged.
  • Ensure the JST connector is securely attached to the device.
  • Check if the device itself has other issues (refer to the device's manual).
• Reduced Run Time:
  • Battery capacity naturally degrades over time and cycles.
  • Ensure the battery is being fully charged each time.
  • Operating the device in extreme temperatures can affect performance.

If problems persist, contact customer support for further assistance.

8. Specifications

Image 8.1: Battery Dimensions. This image provides a visual representation of the battery's dimensions, indicating a length of 133mm, a width of 37mm, and a height of 22mm.

9. Quality Assurance

SSCYHT maintains a strict quality management policy. Every lithium battery undergoes thorough QC appearance and functional testing before shipment to ensure reliability and performance.