CAMMOO 14 Inch EC Motor Shutter Exhaust Fan Instruction Manual

1. Important Safety Information

Please read and understand all safety instructions before installing, operating, or maintaining this product. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• Always disconnect power before servicing or cleaning the fan.
• Ensure proper grounding to prevent electrical shock.
• Do not operate the fan with a damaged cord or plug.
• Keep hands, clothing, and other objects away from moving parts during operation.
• Install the fan in a location where it is protected from direct water exposure unless specifically rated for outdoor use. This model is rated for indoor use.
• Ensure the installation area is structurally sound to support the fan's weight.

2. Product Overview

The CAMMOO 14 Inch EC Motor Shutter Exhaust Fan is designed for efficient ventilation in various indoor environments such as attics, greenhouses, garages, and chicken coops. It features an energy-saving EC motor, a smart touchscreen controller for precise environmental management, and automatic shutters.

Figure 2.1: CAMMOO 14 Inch EC Motor Shutter Exhaust Fan with its smart touchscreen controller.

Figure 2.2: Internal view of the high-efficiency EC copper motor with dual ball bearings for durability and energy saving.

3. Package Contents

Verify that all items listed below are included in your package:

• 14 Inch Shutter Exhaust Fan x1
• 6 Inch Touchscreen Controller for temperature / humidity / speed control x1
• Manual x1

4. Installation

The fan is 90% pre-assembled for quick and easy installation. Follow these steps to install your exhaust fan and controller.

4.1 Fan Mounting

1. Prepare the Opening: Ensure you have a suitable opening in your wall or mounting surface that accommodates the fan's dimensions (approximately 16.93" x 16.93").
2. Mark and Drill Holes: Place the fan in the desired position and mark the mounting holes through the fan brackets. Drill pilot holes as needed.
3. Secure the Fan: Mount the fan securely using appropriate fasteners (not included) for your wall material.

4.2 Controller and Sensor Connection

The controller connects to the fan and sensor using Type-C and USB ports, ensuring convenient and reliable connections.

1. Connect the Fan: Plug the fan's Type-C cable into one of the 'FAN' ports (FAN1, FAN2, or FAN3) on the touchscreen controller.
2. Connect the Sensor: Plug the sensor cable into the 'SENSOR' port on the controller.
3. Power the Controller: Connect the controller to a power source using the provided USB cable.

Figure 4.1: Visual guide for the three main installation steps: marking holes, installing the fan, and connecting the smart controller.

Figure 4.2: The touchscreen controller supports connecting and managing up to three CAMMOO fans simultaneously.

5. Operating Instructions

The 6-inch touchscreen controller provides an intuitive interface for managing your exhaust fan. Below are the key operating functions.

Figure 5.1: Detailed breakdown of the touchscreen controller's interface and functions.

5.1 Power On/Off

• To power on, press and hold the "ON/OFF" button for more than 3 seconds.
• To power off, press and hold the "ON/OFF" button for more than 3 seconds again.

5.2 Fan Speed Adjustment

• Once powered on, use the "+" or "-" buttons to adjust the fan speed from 1% to 100% (10 speeds available).

5.3 Temperature and Humidity Control Modes (AUTO Mode)

Press the "AUTO" button to cycle through the following automatic modes:

• High Temperature Mode: The fan powers on when the ambient temperature is higher than or equal to the set temperature. It powers off when the ambient temperature is lower than the set temperature.
• Low Temperature Mode: The fan powers on when the ambient temperature is lower than or equal to the set temperature. It powers off when the ambient temperature is higher than the set temperature.
• High Humidity Mode: The fan powers on when the ambient humidity is higher than or equal to the set humidity. It powers off when the ambient humidity is lower than the set humidity.
• Low Humidity Mode: The fan powers on when the ambient humidity is lower than or equal to the set humidity. It powers off when the ambient humidity is higher than the set humidity.

Use the "+" or "-" buttons to set the desired temperature or humidity threshold for each mode.

5.4 Timer and Cycle Modes

Press the "TIMER" button to access timer settings. You can set the fan to operate for specific durations or cycles:

• Open Mode: Set the duration (in minutes) for which the fan will run. "OFF" means the timer is cancelled.
• Close Mode: Set the duration (in minutes) for which the fan will remain off. "OFF" means the timer is cancelled.
• Times Mode: Set the number of cycles for the fan to operate (e.g., run for X minutes, then off for Y minutes, repeated Z times). When the "TIMES" setting is "OFF", it means infinite cycling.

5.5 Celsius/Fahrenheit Switch

• Press the "°C/°F" button to switch between Celsius and Fahrenheit temperature displays.

5.6 Brightness and Sound Adjustment

• Press the light/sound icon to set the display brightness to 50%.
• Press the light/sound icon again to turn off the backlight.
• Press the light/sound icon a third time to set brightness to maximum.
• Press and hold the light/sound icon for more than 3 seconds to toggle silent mode (sound on/off).

5.7 Official Product Video: Controller Usage

6. Maintenance

Regular maintenance ensures optimal performance and longevity of your CAMMOO exhaust fan.

• Cleaning: Periodically clean the fan blades and automatic shutters to prevent dust and debris buildup, which can reduce efficiency. Use a soft cloth and mild detergent if necessary. Ensure the fan is disconnected from power before cleaning.
• Automatic Shutters: The automatic shutters close tightly when the fan is off, blocking dust and debris. Ensure they operate smoothly without obstruction.
• Motor: The EC motor features permanent lubrication, minimizing maintenance needs. No additional lubrication is required.
• Connections: Periodically check all electrical connections for tightness and signs of wear.

Figure 6.1: Automatic shutters help maintain a clean environment by blocking dust and debris when the fan is not in operation.

7. Troubleshooting

If you encounter issues with your CAMMOO exhaust fan, refer to the following common troubleshooting steps:

• Fan Not Turning On:
  • Check if the power cord is securely plugged into an active outlet.
  • Ensure the controller is powered on (press and hold ON/OFF for 3 seconds).
  • Verify that the fan's cable is properly connected to the controller's 'FAN' port.
  • If in AUTO mode, check if the ambient conditions meet the set thresholds for activation.
• Inaccurate Temperature/Humidity Readings:
  • Ensure the sensor is properly connected to the 'SENSOR' port on the controller.
  • Verify the sensor is placed in an area representative of the environment you wish to monitor, away from direct heat sources or moisture.
  • If persistent inaccuracies are observed, consider calibrating the sensor if your model supports it, or contact customer support.
• Fan Does Not Restart After Power Failure:
  • This model may require manual power-on from the controller after a power outage. Press and hold the "ON/OFF" button for 3 seconds to restart.
• Automatic Shutters Not Opening/Closing:
  • Check for any physical obstructions preventing the shutters from moving freely.
  • Ensure the fan is receiving power and the motor is attempting to operate.

If these steps do not resolve the issue, please contact CAMMOO customer support for further assistance.

8. Specifications

9. Warranty and Support

CAMMOO products are designed for reliability and durability. For specific warranty details, please refer to the warranty card included with your product or visit the official CAMMOO website.

If you require technical assistance, have questions about installation, operation, or maintenance, please contact CAMMOO customer support. Have your model number (FS-EC14) and purchase information ready when contacting support.

You can visit the CAMMOO Store on Amazon for more product information and support resources.