LLAVETOR LTS70T36 Torque Screwdriver Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your LLAVETOR LTS70T36 Torque Screwdriver. Please read this manual thoroughly before operation and retain it for future reference.

Product Overview

Included Components:

8-70 in.lb Torque Screwdriver
Hexagon Sockets: H2, H2.5, H3, H4, H5, H6, H8
Imperial Hexagon Sockets: 3/32, 7/64, 5/32, 3/16
Plum Blossom (Torx) Bits: T6, T8, T10, T15, T20, T25, T27, T30, T40
Cross (Phillips) Bits: PH0, PH1, PH2, PH3
Slotted (Flathead) Bits: SL2, SL3, SL4, SL5, SL6
Hexagon to Square Adapter (1/4")
1/4" Hexagon Sockets: 6mm, 7mm, 8mm, 9mm, 10mm
1/4" Slide Bar (110mm length)
1/4" Magnetic Screwdriver Extension Bar (60mm length)
Accuracy Test Report / Instructions / Certificate of Conformity

Key Features:

Durable S2 Alloy Steel Bits: Provides higher hardness and wear resistance.
Clear Laser Scale: For easy and accurate torque value reading.
Soft Anti-Slip Handle: Ensures a secure grip during use.
Internal Clutch Mechanism: Prevents overtightening with a distinct click indicator.
Compact and Lightweight Design: Facilitates ease of use and precision for delicate tasks.

LLAVETOR LTS70T36 Torque Screwdriver 38-piece set in its case, showing the screwdriver, various bits, and accessories. — This image displays the complete LLAVETOR LTS70T36 Torque Screwdriver set, including the main screwdriver unit, a wide assortment of S2 steel bits, sockets, a T-bar, and a magnetic extension rod, all neatly organized within its protective carrying case.

Close-up of S2 material bits, the laser-etched torque scale, and the soft anti-slip handle of the LLAVETOR torque screwdriver. — A detailed view highlighting the durable S2 alloy steel bits, known for their higher hardness and wear resistance. The image also shows the clear, laser-etched scale for precise torque readings and the textured, soft anti-slip handle designed for comfortable and secure grip.

Setup

Inserting a Bit:

Select the appropriate bit for your application.
Insert the bit firmly into the 1/4" hex magnetic bit holder at the end of the torque screwdriver. The magnetic holder will secure the bit.
For additional reach or leverage, attach the 1/4" magnetic screwdriver extension bar or the 1/4" slide bar as needed.

LLAVETOR torque screwdriver with T-Bar attached, being used to apply torque in a workshop setting. — The image shows the LLAVETOR torque screwdriver with the T-Bar accessory attached, demonstrating how it provides additional leverage and stability for applying torque, particularly useful in various workshop applications.

Operating Instructions

Setting the Torque Value:

Unlock: Pull down the adjusting wheel located near the base of the screwdriver handle.
Adjust: Rotate the adjusting wheel to align the desired torque value. The main scale (red line) indicates major values, and the minor scale (triangular pointer) indicates precise increments. A full rotation of the wheel represents 10 in-lbs.
Lock: Once the desired torque is set, push the adjusting wheel back up to lock it in place.

Four-step visual guide demonstrating how to unlock, adjust, lock, and confirm torque setting with a click on the LLAVETOR torque screwdriver. — This visual guide illustrates the process of setting the torque: 1) Pulling down to unlock the adjustment mechanism, 2) Rotating the wheel to select the desired torque value, 3) Pushing up to lock the setting, and 4) The audible 'click' signal indicating the preset torque has been reached during operation.

Applying Torque:

Hold the torque screwdriver firmly.
Apply steady, even pressure while rotating the screwdriver.
Continue turning until you hear and feel a distinct "click" from the internal clutch mechanism. This indicates that the preset torque value has been reached, and the screwdriver will prevent further tightening.
Stop applying force immediately after the click to avoid overtightening.

This video provides a brief introduction to the LLAVETOR torque screwdriver, showcasing its design, the process of adjusting the torque setting, and a demonstration of its operation, including the audible click when the set torque is achieved.

Maintenance

Cleaning: Wipe the screwdriver and bits with a clean, dry cloth after each use. Do not use abrasive cleaners or solvents.
Storage: Store the torque screwdriver and its bits in the provided case in a dry, clean environment to prevent corrosion and damage.
Calibration: For optimal accuracy, periodic calibration by a qualified professional is recommended, especially after heavy use or if accuracy is suspected to be compromised.
Lubrication: The internal mechanism is factory-lubricated. Do not attempt to lubricate internal components unless specifically instructed by the manufacturer.

Troubleshooting

Issue: No audible click when torque is reached.

Possible Causes:

The torque setting is too low for the application, or the fastener is already tight.
The adjusting wheel is not fully locked after setting the torque.
The tool may require calibration or service.

Solutions:

Ensure the torque setting is appropriate for the fastener.
Verify the adjusting wheel is pushed up and locked after setting the torque.
If the issue persists, contact customer support for assistance.

Specifications

Attribute	Value
Brand	LLAVETOR
Model Name	LTS70T36
Torque Range	8-70 in.lb
Drive Size	1/4"
Material	Alloy Steel
Head Style	Square (for adapter)
Color	Green
Included Components	Torque Screwdriver, various bits, extension bar, slide bar, sockets, adapter, case.

Warranty and Support

For warranty information and customer support, please refer to the documentation included with your product or contact LLAVETOR customer service directly. Keep your purchase receipt for warranty claims.