Recaceik Dining Table Set with Faux Marble Top and Benches Instruction Manual

Important Safety Information

Please read all instructions carefully before assembly and use. Keep this manual for future reference.

• Ensure all parts are present and undamaged before beginning assembly. Do not use if any parts are missing or broken.
• Assemble the product on a soft, clean surface to prevent scratches.
• Tighten all fasteners securely, but do not overtighten. Periodically check and re-tighten fasteners as needed.
• Do not stand or sit on the table. The table is designed for dining and general surface use.
• Distribute weight evenly on the table and benches.
• Keep small parts away from children during assembly.
• Avoid placing hot items directly on the faux marble tabletop without protection.

Package Contents

Verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• 1 x Dining Table (Faux Marble Top, Metal Frame)
• 2 x Dining Benches (PU Leather Upholstered, Metal Frame)
• 1 x Hardware Pack (Screws, Allen Wrench, etc.)
• 1 x Assembly Instruction Sheet

Figure 1: Overview of the Recaceik 3-piece dining table set, showing the faux marble top table and two upholstered benches.

Setup and Assembly Instructions

Assembly typically takes less than 30 minutes. It is recommended to have two people for easier assembly.

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, clean surface to prevent damage. Identify all table and bench components, including frames, tops, and hardware.
2. Assemble Table Frame: Attach the table legs to the table frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
3. Attach Tabletop: Carefully place the faux marble tabletop onto the assembled table frame. Align the pre-drilled holes on the tabletop with the holes on the frame. Secure the tabletop to the frame using the appropriate screws. Once the tabletop is attached, fully tighten all screws on the table frame and tabletop.
4. Assemble Bench Frames: For each bench, attach the bench legs to the bench frame using the provided screws and Allen wrench. Ensure all connections are secure but do not fully tighten yet.
5. Attach Bench Seats: Carefully place each upholstered bench seat onto its assembled bench frame. Align the pre-drilled holes on the bench seat with the holes on the frame. Secure the bench seat to the frame using the appropriate screws. Once the bench seats are attached, fully tighten all screws on the bench frames and seats.
6. Final Check: Gently lift and move the assembled table and benches to their desired location. Ensure all parts are stable and level. Adjust the leveling feet if necessary to prevent wobbling.

Figure 2: Illustration of the table's dimensions and key construction elements, including the thickened metal frame and MDF material with marble decoration.

Operating Instructions (Usage)

This dining set is designed for versatile use in various living spaces.

• Dining: Use the table for meals, work, or other activities. The benches provide comfortable seating for up to four individuals.
• Space-Saving: The benches are designed to tuck neatly under the table when not in use, maximizing floor space in smaller rooms or apartments.
• Placement: Position the dining set on a flat, stable surface. Avoid placing it in direct sunlight or near heat sources to prevent material degradation.

Figure 3: Demonstration of the space-saving design, showing benches both in use and neatly stored under the table.

Maintenance and Care

Proper care will extend the life and maintain the appearance of your dining set.

• Faux Marble Tabletop:
  • Wipe spills immediately with a soft, damp cloth.
  • Clean regularly with a mild, non-abrasive cleaner and a soft cloth.
  • Avoid harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.
  • Use coasters or placemats to protect the surface from hot dishes, scratches, and stains.
• PU Leather Benches:
  • Wipe clean with a soft, damp cloth.
  • For tougher stains, use a mild soap solution and wipe dry immediately.
  • Avoid direct sunlight exposure to prevent fading and cracking.
  • Do not use abrasive cleaners, solvents, or furniture polish on PU leather.
• Metal Frame: Wipe with a soft, dry cloth to remove dust.
• General: Periodically check and re-tighten all screws and bolts to ensure stability.

Troubleshooting

Specifications

Warranty and Support

Specific warranty details for this product are not provided in the available information. Please refer to your purchase documentation or contact the retailer for warranty information.

For any questions, missing parts, or assistance, please contact Recaceik customer support through the retailer where the product was purchased or visit the official Recaceik website.