Marbrasse Rolling File Cart Instruction Manual

1. Introduction

Thank you for choosing the Marbrasse Rolling File Cart. This mobile filing cabinet is designed to help organize your office or home workspace efficiently. Featuring adjustable dividers, two drawers, and lockable wheels, it offers versatile storage and easy mobility. Please read this manual carefully before assembly and use to ensure proper setup and operation.

Image 1.1: Overview of the Marbrasse Rolling File Cart.

2. Product Components

Before beginning assembly, ensure all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

• Main Frame (Metal)
• Top Shelf (Wood)
• Upper Drawer (Mesh, for office supplies)
• Lower Drawer (Mesh, for hanging files)
• Adjustable File Dividers (for top section)
• Lockable Swivel Casters (4 units)
• Assembly Hardware (screws, wrench, etc.)

Image 2.1: Key features including vertical storage, drawer handle, and casters.

3. Setup and Assembly

The Marbrasse Rolling File Cart is designed for straightforward assembly. Follow the detailed instructions and use the provided accessories. All parts are labeled to simplify the process.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Verify all components are present against the parts list.
2. Assemble Frame: Attach the side frames to the base and top sections using the provided screws and tools. Ensure all connections are secure.
3. Install Casters: Screw the lockable swivel casters into the designated holes on the bottom of the frame. Ensure they are tightened securely.
4. Insert Drawers: Slide the upper and lower mesh drawers into their respective slots.
5. Place Dividers: Position the adjustable file dividers in the top section as desired for organizing files and documents.
6. Final Check: Once assembled, gently shake the cart to ensure stability. Tighten any loose screws if necessary.

Note: Assembly typically takes approximately 30 minutes.

4. Operating Instructions

This file cart offers flexible storage and mobility for various office and home needs.

4.1 Using the Drawers

• The upper drawer is suitable for storing daily office supplies such as pens, staplers, and small notebooks.
• The lower drawer is designed to accommodate hanging letter files, keeping your documents organized and easily accessible.

4.2 Adjustable Dividers

The top section features adjustable dividers that can be repositioned to create custom compartments for different sizes of files, folders, or books. Simply slide them along the rails to your desired width.

Image 4.1: Example of large capacity and organization with files and supplies.

4.3 Lockable Swivel Casters

The cart is equipped with four 360° swivel casters, two of which are lockable. This allows for both flexible mobility and steady fixation.

• To move the cart, ensure the caster locks are disengaged.
• To secure the cart in place, press down on the locking mechanism on the two lockable casters until they click into position.

Image 4.2: Detail of the lockable and swivel caster functionality.

5. Maintenance

To ensure the longevity and appearance of your Marbrasse Rolling File Cart, follow these simple maintenance guidelines:

• Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the finish.
• Caster Care: Periodically check the casters for any accumulated debris (hair, dust) and clean as needed to maintain smooth rolling.
• Hardware Check: Every few months, inspect all screws and connections to ensure they remain tight. Retighten if any looseness is detected.
• Weight Limit: Do not exceed the recommended weight capacity to prevent damage to the cart structure.

6. Troubleshooting

If you encounter any issues with your file cart, refer to the following common solutions:

• Cart is unstable: Ensure all assembly screws are fully tightened. Check that the casters are properly installed and not damaged.
• Casters not rolling smoothly: Inspect casters for debris (e.g., hair, lint) and clean them. Ensure the locking mechanism is fully disengaged.
• Drawers are sticking: Check for any obstructions in the drawer slides. Ensure the cart is on a level surface.
• Difficulty with assembly: Re-read the assembly instructions carefully, paying close attention to diagrams. Ensure all parts are oriented correctly. If issues persist, contact customer support.

7. Specifications

Image 7.1: Product dimensions and drawer sizes.

8. Warranty and Support

Marbrasse is committed to providing quality products and customer satisfaction. If you have any questions, concerns, or require assistance with your Rolling File Cart, please do not hesitate to contact our customer service team. We aim to resolve any issues within 24 hours.

For support, please refer to the contact information provided with your purchase or visit the official Marbrasse website.