STARRYBOT Cordless Robotic Pool Cleaner ET2310-01 User Manual

Introduction

Thank you for choosing the STARRYBOT Cordless Robotic Pool Cleaner. This manual provides essential information for the safe and efficient operation and maintenance of your new pool cleaner. Please read it thoroughly before first use and retain it for future reference.

Image: The STARRYBOT Cordless Robotic Pool Cleaner, a compact white and black device with a handle.

Product Overview

The STARRYBOT Cordless Robotic Pool Cleaner is designed for efficient cleaning of various pool types, including above-ground and inground flat pools up to 900 sq. ft. It features a cordless design, powerful suction, smart navigation, and self-parking technology for easy retrieval.

Key Features:

• Cordless Operation: Eliminates tangled cables for unrestricted movement.
• Powerful Suction: Effectively removes leaves, silt, sand grains, and algae.
• Smart Edge Navigation: Automatically returns to the pool edge when battery is low or cleaning is complete.
• Easy Retrieval: Includes a hook for convenient removal from the pool.
• Extended Battery Life: Up to 150 minutes of operation on a single charge.
• Quick Charging: Approximately 120 minutes for a full charge.
• Versatile: Suitable for various pool shapes and surfaces (mosaic, vinyl, cement).

Image: The robotic cleaner actively collecting debris such as leaves, silt, sand grains, and algae from the pool floor.

Setup

Charging the Cleaner:

1. Locate the charging port on the cleaner.
2. Connect the charger to the port and a power outlet.
3. Allow approximately 120 minutes for a full charge. The cleaner is designed to be waterproof, so the charging port is safe from moisture.

Image: The robotic pool cleaner connected to its charger, indicating its battery is being replenished.

Preparing for Deployment:

1. Ensure the cleaner is fully charged.
2. Press the one-touch start button located on the underside of the unit.
3. Place the cleaner into the pool water within 20 seconds of activation. If not submerged in time, the unit will automatically shut off to prevent motor burnout.

Video: Demonstrates the one-touch start and deployment of the STARRYBOT cleaner into the pool, showcasing its powerful suction and smart navigation.

Operating Instructions

Once activated and submerged, the STARRYBOT cleaner will begin its cleaning cycle. It uses smart navigation to cover the pool floor, changing direction upon encountering walls or obstacles.

Cleaning Cycle:

• The cleaner operates for up to 150 minutes on a full charge.
• It is designed to clean the pool bottom only and is not a wall-climbing unit.
• The cleaner will move across the pool floor, collecting debris with its powerful suction and brushes.

Image: An aerial view of the STARRYBOT cleaner operating in a pool, illustrating its comprehensive coverage.

Self-Parking and Retrieval:

The cleaner features self-parking technology. When its battery is low or its cleaning cycle is complete, it will automatically navigate to the nearest pool edge for easy retrieval.

1. Use the included hook (attachable to a standard pool pole) to retrieve the cleaner from the pool edge.
2. Lift the cleaner out of the water. It is designed for fast draining to minimize weight during retrieval.

Image: A person using the provided hook to easily retrieve the STARRYBOT cleaner from the pool.

Maintenance

Regular cleaning of the filter basket is crucial for maintaining the cleaner's performance.

Cleaning the Filter Basket:

1. Locate the two latches on each side of the unit.
2. Unclip the latches and lift the top cover to access the filter basket.
3. Remove the filter screen from the basket.
4. Rinse the filter screen and the basket thoroughly with a hose to remove all collected debris. Pay special attention to the screen to ensure all fine particles are removed.
5. Ensure the two arrows on the filter screen and the base align when reinserting the screen.
6. Place the top cover back on, ensuring the latches click securely into place.

Image: A step-by-step visual guide demonstrating how to open the cleaner, remove the filter, and clean it with a hose.

Specifications

Image: A visual comparison of suitable pool types and features for the STARRYBOT cleaner.