Amana NTW4519JW2 Washer Water Drain Pump Replacement Part Manual

1. Introduction

This manual provides essential information for the installation, operation, and maintenance of the Fricpart-011932 replacement water drain pump for the Amana NTW4519JW2 washing machine. Please read these instructions carefully before proceeding with any installation or repair to ensure safe and correct usage.

2. Safety Information

Disconnect Power: Always unplug the washing machine from the power outlet before attempting any repairs or maintenance. Failure to do so can result in electric shock or serious injury.
Water Supply: Turn off the water supply to the washing machine before beginning any work involving water lines or pumps.
Wear Protective Gear: Wear appropriate personal protective equipment, such as gloves and safety glasses, to prevent injury.
Professional Assistance: If you are unsure about any step or uncomfortable performing the repair, consult a qualified appliance technician.
Original Parts: Use only genuine or approved replacement parts to ensure proper function and safety.

3. Product Overview

The Fricpart-011932 is a replacement water drain pump specifically designed for the Amana NTW4519JW2 washing machine model. This component is crucial for removing water from the washer tub during the drain and spin cycles. Ensuring its proper function is vital for the washing machine's overall performance.

Replacement Water Drain Pump for Amana NTW4519JW2 Washer

This image displays the replacement water drain pump, showing its general shape and connection points. It is designed for the Amana NTW4519JW2 washer model.

4. Setup and Installation

Note: Installation of this part requires basic mechanical skills and familiarity with appliance repair. If you are not confident in your ability to perform this repair, please seek professional assistance.

Preparation: Ensure the washing machine is unplugged and the water supply is turned off. Move the washer away from the wall to access the rear or bottom panel.
Access the Pump: Depending on your specific washer design, you may need to remove the front, rear, or bottom access panel to locate the drain pump. Refer to your washer's service manual for exact panel removal instructions.
Drain Residual Water: Place towels and a shallow pan beneath the pump area to catch any residual water that may drain out when hoses are disconnected.
Disconnect Hoses: Carefully disconnect the inlet and outlet hoses from the old drain pump. Note their positions for correct reattachment.
Disconnect Wiring: Disconnect the electrical wiring harness from the old pump.
Remove Old Pump: Unmount the old drain pump from its housing or bracket. This may involve unscrewing fasteners or releasing clips.
Install New Pump: Position the new Fricpart-011932 drain pump in the same location and secure it with the original fasteners or clips.
Reconnect Components: Reconnect the electrical wiring harness and then the inlet and outlet hoses to the new pump. Ensure all connections are secure to prevent leaks.
Test for Leaks: Before reassembling the washer, turn on the water supply and briefly plug in the washer to run a short drain cycle. Carefully check for any leaks around the new pump and hose connections.
Reassemble: Once you confirm there are no leaks, unplug the washer again and reattach any removed access panels. Push the washer back into its position.

5. Operating

After successful installation of the replacement drain pump, the washing machine should resume normal operation. The drain pump functions automatically during the wash cycle to remove water from the tub. No specific user operation is required for the drain pump itself beyond ensuring the washer's cycles complete as expected.

First Use: Run a small, empty wash cycle to confirm proper drainage and check for any unusual noises or leaks.
Normal Operation: Continue to use your washing machine as per its original manufacturer's instructions.

6. Maintenance

Regular maintenance can extend the life of your washing machine and its components, including the drain pump.

Check for Obstructions: Periodically check the drain pump filter (if accessible on your model) for lint, coins, or other small objects that could impede pump function. Refer to your washer's user manual for filter cleaning instructions.
Inspect Hoses: Occasionally inspect the drain hoses for kinks, cracks, or blockages. Ensure they are securely connected.
Listen for Unusual Noises: Pay attention to any new or unusual noises during the drain cycle, which could indicate a problem with the pump or an obstruction.

7. Troubleshooting

If your washing machine experiences issues related to draining after replacing the pump, consider the following:

Problem	Possible Cause	Solution
Washer not draining	Drain hose kinked or blocked Pump filter clogged Electrical connection loose New pump faulty (rare)	Check and straighten drain hose; clear any blockages. Clean the pump filter. Verify electrical connections to the pump are secure. If all else fails, test the new pump with a multimeter or consult a technician.
Water leaking from pump area	Hose connections loose Hose damaged Pump housing cracked	Tighten hose clamps. Inspect hoses for damage and replace if necessary. Inspect pump housing for cracks; replace pump if damaged.
Unusual noise during drain cycle	Object in pump impeller Worn pump bearings	Disconnect power, access pump, and check for foreign objects in the impeller. If noise persists and no obstruction is found, the pump may need further inspection or replacement.

8. Specifications

Part Number: FRIC-PL-APP-TP-22052025-080252
Item Model Number: Fricpart-011932
Compatibility: Amana NTW4519JW2 Washer
Manufacturer: Fricparts
Color: Black/White
Item Package Quantity: 1

9. Warranty Information

Specific warranty details for this replacement part are not provided in the product information. Please refer to the seller's or manufacturer's website, or contact their customer service directly for information regarding warranty coverage and terms.

10. Support

For further assistance, technical support, or to inquire about specific installation procedures for your Amana NTW4519JW2 washer, please contact the seller or the manufacturer of this replacement part. Always provide your product model number (Fricpart-011932) and the washing machine's model number (NTW4519JW2) when seeking support.