NAVIFORCE 5045S Women's Dual Display Watch User Manual

Introduction

Thank you for choosing the NAVIFORCE 5045S Women's Dual Display Watch. This manual provides detailed instructions for the proper setup, operation, and maintenance of your timepiece. Please read this manual thoroughly to ensure optimal performance and longevity of your watch.

Product Overview

The NAVIFORCE 5045S is a sophisticated women's watch featuring both a traditional quartz analog display and a modern digital LCD display. It is designed with a durable stainless steel strap, a robust zinc alloy case, and hardened mineral glass. Key features include 3ATM water resistance, a luminous display, and a unique heart-shaped dial design.

Front view of the NAVIFORCE 5045S watch, showcasing the black dial with rose gold accents, heart-shaped digital displays, and stainless steel strap.

Rear view of the NAVIFORCE 5045S watch, showing the stainless steel case back with model number and water resistance markings, and the black stainless steel strap.

Setup

1. Unboxing

Carefully remove the watch from its packaging. Inspect the watch for any visible damage.

2. Strap Adjustment

The stainless steel strap may require adjustment to fit your wrist comfortably. It is recommended to have this done by a professional jeweler or watch repair service to avoid damaging the strap or clasp.

3. Initial Time Setting (Analog)

1. Pull the crown (the knob on the right side of the watch case) out to the first position.
2. Turn the crown clockwise or counter-clockwise to set the analog hour and minute hands to the correct time.
3. Once the time is set, push the crown back in to its original position.

Operating Instructions

The NAVIFORCE 5045S features a digital display with multiple functions controlled by the side buttons. Refer to the diagram below for button identification.

Diagram highlighting the watch's buttons and their functions for adjusting time and day on the digital display.

Digital Display Functions:

• Button A (Top Left): Light - Activates the luminous backlight for the digital display.
• Button B (Bottom Left): Mode - Cycles through different digital display modes (e.g., Time, Date, Alarm, Stopwatch).
• Button C (Top Right): Adjust - Used to select items to adjust within a setting mode.
• Button D (Bottom Right): Set - Used to change values or confirm settings within a setting mode.

Setting Digital Time and Date:

1. Press Button B (Mode) repeatedly until the digital time display starts flashing, indicating it's in setting mode.
2. Press Button C (Adjust) to cycle through the settings (e.g., seconds, minutes, hours, 12/24-hour format, year, month, day). The currently selected item will flash.
3. Use Button D (Set) to change the value of the flashing item.
4. Once all settings are adjusted, press Button B (Mode) again to exit the setting mode.

Using the Luminous Display:

To illuminate the digital display in low-light conditions, press Button A (Light). The backlight will activate for a few seconds.

Image demonstrating the luminous display mode of the NAVIFORCE 5045S watch, showing the digital elements glowing in the dark.

Maintenance

1. Cleaning

Wipe the watch regularly with a soft, dry cloth to remove dust and smudges. For the stainless steel strap, a slightly damp cloth can be used, followed by immediate drying. Avoid using harsh chemicals or abrasive materials.

2. Water Resistance (3ATM)

Your NAVIFORCE 5045S watch has a water resistance rating of 3ATM (30 meters). This means it is suitable for daily use, splash/rain resistant, and can withstand incidental contact with water. It is NOT suitable for showering, bathing, swimming, snorkeling, or any water-related work. Do not operate buttons or pull the crown when the watch is wet.

3. Battery Replacement

When the watch stops or the digital display fades, the battery may need replacement. It is recommended to have the battery replaced by a qualified watch technician to ensure proper sealing and maintain water resistance.

4. Environmental Care

Avoid exposing the watch to extreme temperatures (hot or cold), strong magnetic fields, or direct sunlight for prolonged periods, as this can affect its accuracy and lifespan.

Troubleshooting

• Analog hands not moving: Check if the crown is pushed all the way in. If it is, the battery may need replacement.
• Digital display is blank or dim: The digital display battery may be low. Replace the battery.
• Incorrect time/date: Follow the operating instructions to reset the analog and digital time/date.
• Water inside the watch: If moisture appears inside the watch, stop using it immediately and take it to a professional for inspection. Water damage is typically not covered under warranty.

Specifications

Diagram illustrating key dimensions and features of the NAVIFORCE 5045S watch, including case diameter, thickness, total length, and material details.

Warranty Information

This NAVIFORCE 5045S watch comes with a Seller Six Months warranty. Additionally, a Manufacturer Warranty may apply. Please retain your purchase receipt as proof of purchase for any warranty claims. The warranty typically covers manufacturing defects but does not cover damage caused by misuse, accidents, unauthorized repairs, or normal wear and tear.

Support

For further assistance or inquiries regarding your NAVIFORCE 5045S watch, please contact:

• Manufacturer: Guangzhou Naviforce Watch Co Ltd, naviforce@126.com
• Importer (India): Vijay Gupta F No 148 F B5 Silver City Derabassi -140507, 8283872490