CESDAP 6-in-1 Wireless Charging Station User Manual

1. Introduction

Thank you for choosing the CESDAP 6-in-1 Wireless Charging Station. This device is designed to simplify your charging experience by providing a centralized solution for your iPhone, Apple Watch, and AirPods, along with integrated alarm clock and night light functionalities. Please read this manual carefully to ensure proper use and optimal performance.

Image 1: The CESDAP 6-in-1 Wireless Charging Station, showcasing its ability to charge an iPhone, Apple Watch, and AirPods simultaneously, alongside its integrated alarm clock and night light.

2. Package Contents

Please verify that all items are present in your package:

• 1 x CESDAP 6-in-1 Wireless Charging Station
• 1 x USB Type-C Charging Cable
• 1 x User Manual

3. Product Overview

Familiarize yourself with the different components of your charging station:

Image 2: A detailed diagram illustrating the various components of the charging station, including the phone charging area, watch charging area, night light, alarm clock display, and headphone charging area.

1. Phone Wireless Charging Pad
2. Apple Watch Charging Stand
3. AirPods Wireless Charging Pad
4. Digital Alarm Clock Display
5. Night Light
6. Time/Alarm Setting Buttons (M, +, -)
7. Night Light Touch Switch
8. USB-C Input Port (Rear)

4. Setup Instructions

4.1 Power Connection

1. Connect the provided USB Type-C cable to the input port on the rear of the charging station.
2. Connect the other end of the USB Type-C cable to a compatible power adapter (not included, 18W or higher recommended for optimal performance).
3. Plug the power adapter into a wall outlet. The digital display will illuminate, indicating the device is powered on.

4.2 Setting the Time

1. Time Format: Long press the "+" button to switch between 24-hour and 12-hour formats.
2. Set Time: Short press the "M" button. The hour display will flash. Use the "+" and "-" buttons to adjust the hour. Press "M" again to set the minutes, then use "+" and "-" to adjust. Press "M" a third time to confirm and exit time setting mode.

Image 3: Illustration of the power-off time memory feature, indicating that the time settings are retained even if power is disconnected.

Power-Off Time Memory: The charging station includes a built-in battery to retain time settings in case of power disconnection, eliminating the need to reset the time.

5. Operating Instructions

5.1 Wireless Charging for Devices

The charging station supports simultaneous wireless charging for compatible iPhones, Apple Watches, and AirPods.

Image 4: The charging station actively charging an iPhone, Apple Watch, and AirPods, demonstrating its multi-device capability.

1. iPhone Charging: Place your compatible iPhone vertically or horizontally on the phone charging pad. Ensure the phone is centered for optimal charging. A charging indicator on your phone screen will confirm charging.
2. Apple Watch Charging: Place your Apple Watch on the dedicated watch charging stand. The watch will magnetically align and begin charging.
3. AirPods Charging: Place your AirPods case (with wireless charging capability) on the AirPods charging pad. The charging indicator on your AirPods case will confirm charging.

Note: For optimal charging, ensure your devices are properly aligned on their respective charging areas. Remove any thick or metallic phone cases that may interfere with wireless charging.

5.2 Alarm Clock Function

Image 5: The charging station displaying the alarm clock feature, set to 7:30 AM, with an alarm icon.

1. Set Alarm: Double press the "M" button. The hour display for the alarm will flash. Use the "+" and "-" buttons to adjust the alarm hour. Press "M" again to set the alarm minutes, then use "+" and "-" to adjust. Press "M" a third time to confirm and activate the alarm. An alarm icon will appear on the display.
2. Deactivate Alarm: Double press the "M" button again to turn off the alarm. The alarm icon will disappear.
3. Snooze: When the alarm sounds, press any button (except the "M" button for deactivation) to activate snooze. The alarm will sound again after a short interval.

5.3 Night Light Function

Image 6: The night light feature demonstrated at 30%, 60%, and 100% brightness levels, showing the adjustable illumination.

1. Turn On/Off: Touch the night light touch switch (located on the side of the night light) to turn the light on or off.
2. Adjust Brightness: With the night light on, touch and hold the night light touch switch to cycle through three brightness levels (30%, 60%, 100%). Release your finger when the desired brightness is reached.

6. Device Compatibility

The CESDAP 6-in-1 Wireless Charging Station is compatible with a wide range of devices:

Image 7: A compatibility chart detailing supported iPhone models (7.5W MAX), Samsung Galaxy series (10W MAX), and Google Pixel phones (15W MAX) that support Qi wireless charging.

• iPhone (7.5W MAX): iPhone 15/Pro/Plus/Pro Max, 14/Pro/Plus/Pro Max, 13/mini/Pro/Pro Max, 12/mini/Pro/Pro Max, 11/Pro/Pro Max, X/XR/XS/XS Max, 8/8 Plus/SE2/SE3.
• Samsung Galaxy (10W MAX): S23/S22/S21/S20 series, S10/S9/S8/S7/S6 series, Z Flip/Fold series, Note 20/10/9/8 series.
• Google Pixel (15W MAX): Other cell phones that support Qi standard wireless charging. Note: Not compatible with Google Pixel 5A/4A/3A.

Image 8: A compatibility chart for Apple Watch (2.5W MAX) and AirPods (3W MAX), specifying supported models. It notes that the charger is not compatible with Apple Watch 1 or other brands of watches, and not compatible with AirPods with Lightning charging cases.

• Apple Watch (2.5W MAX): Series 9/8/7/6/5/4/3/2/Ultra/Ultra 2/SE. Note: Not compatible with Apple Watch 1 and other brands of smartwatches.
• AirPods (3W MAX): AirPods 2/3/Pro/Pro 2. Note: Not compatible with AirPods with Lightning charging cases.

6.1 Phone Case Compatibility

Image 9: A visual guide indicating that plastic and magnetic cases less than 4mm thick are compatible, while cases with PopSockets, metal, magnets, or credit cards are not compatible with wireless charging.

The charging station supports phone cases less than 4mm thick. For optimal charging, avoid cases with:

• PopSockets
• Metal attachments
• Magnets (other than MagSafe compatible)
• Credit cards or other foreign objects

7. Maintenance

1. Cleaning: Disconnect the power before cleaning. Use a soft, dry cloth to wipe the surface of the charging station. Do not use abrasive cleaners or immerse the device in water.
2. Storage: Store the device in a cool, dry place away from direct sunlight and extreme temperatures when not in use for extended periods.

8. Troubleshooting

9. Specifications

• Brand: CESDAP
• Model: 6-in-1 Wireless Charging Station
• Input Voltage: 120 Volts
• Output Voltage: 5 Volts
• Output Current: 2 Amps
• Connector Type: USB Type C
• Item Weight: 1.12 pounds
• Package Dimensions: 7 x 5 x 5 inches
• Special Feature: Wireless Charging, Alarm Clock, Night Light
• Color: Black

10. Safety Information

• Do not disassemble or modify the device.
• Keep the device away from water, moisture, and high temperatures.
• Avoid dropping or subjecting the device to strong impacts.
• Use only compatible power adapters and cables.
• Do not place metallic objects or magnetic cards on the charging pads during operation.
• Ensure proper ventilation around the device during use.

11. Warranty and Support

This CESDAP product comes with a 2-Year Replacement Promise, ensuring peace of mind regarding product defects or malfunctions.

Additionally, we offer Lifetime Technical Support Service. If you encounter any operational questions during use, such as multiple device charging settings, charging power adaptation, or compatibility issues, our professional technical team is available to provide detailed answers and operation guidance within 24 hours. Please refer to the contact information provided with your purchase for support.