DON PEREGRINO B2 Bike Tail Light User Manual

Introduction

Thank you for choosing the DON PEREGRINO B2 Bike Tail Light. This powerful 110-lumen tail light is designed to enhance your visibility and safety during cycling, featuring multiple lighting modes, USB-C recharging, and versatile mounting options. Please read this manual thoroughly before use to ensure proper installation and operation.

Image: The DON PEREGRINO B2 Bike Tail Light mounted on a bicycle, demonstrating its powerful 110-lumen output for enhanced visibility.

What's Included

The DON PEREGRINO B2 package includes the following components:

• 1 x DON PEREGRINO B2 Bicycle Tail Light
• 1 x Saddle Rail Mount
• 1 x Seatpost Mount
• 1 x USB-C Charging Cable
• 1 x User Manual (this document)

Image: All components included in the DON PEREGRINO B2 package: the tail light unit, saddle rail mount, seatpost mount, USB-C charging cable, and the user manual.

Setup and Installation

The DON PEREGRINO B2 offers two primary mounting options: Saddle Rail Mounting and Seatpost Mounting. Choose the option that best suits your bicycle and preference.

1. Saddle Rail Mounting

1. Identify the saddle rail mount. This mount is designed to attach directly to the metal rails under your bicycle saddle.
2. Securely attach the saddle rail mount to the rails beneath your bicycle seat. Ensure it is tightened firmly to prevent movement during rides.
3. Slide the DON PEREGRINO B2 tail light onto the mount until it clicks into place. Ensure the light is facing directly backward.

2. Seatpost Mounting

1. Identify the seatpost mount. This mount typically uses a rubber strap or clamp to secure around the bicycle's seatpost.
2. Wrap the seatpost mount around your bicycle's seatpost at the desired height. Secure it tightly using the provided strap or mechanism.
3. Slide the DON PEREGRINO B2 tail light onto the mount until it clicks into place. Adjust the angle to ensure optimal visibility from the rear.

Image: Visual guide illustrating both saddle rail mounting (1) and seatpost mounting (2) methods for the tail light, along with the product dimensions (8.7cm L x 2.4cm W x 1.5cm H).

The light can be easily removed from either mount for charging or security by pressing the release tab and sliding it off.

Operating Instructions

The DON PEREGRINO B2 features a single button for power and mode selection.

Power On/Off

• To turn the light ON, press and hold the power button for approximately 2 seconds.
• To turn the light OFF, press and hold the power button for approximately 2 seconds while the light is on.

Changing Lighting Modes

Once the light is on, short press the power button to cycle through the 5 available lighting modes:

1. Steady Red: Constant red illumination for consistent visibility.
2. Flash Red: Flashing red light for increased attention.
3. Blue/Red Strobe: Alternating red and blue strobe for maximum visibility and warning.
4. Steady Blue: Constant blue illumination.
5. Flash Blue: Flashing blue light.

Image: A grid displaying the five distinct lighting modes of the DON PEREGRINO B2: Steady Blue, Flashing Blue, Alternating Blue/Red Flash, Steady Red, and Flashing Red.

Maintenance and Charging

Charging the Battery

The DON PEREGRINO B2 features a built-in rechargeable battery and a USB-C charging port.

• Locate the USB-C charging port on the light.
• Connect the provided USB-C cable to the light and the other end to any standard USB power source (e.g., computer, wall adapter, power bank).
• During charging, a red indicator light will illuminate.
• Once fully charged (approximately 2 hours), the indicator light will turn green.
• A full charge provides approximately 4 to 10 hours of working time, depending on the selected mode.
• It is recommended to fully charge the light before its first use.

Image: Illustration of the USB-C quick charging feature. A red light indicates the device is charging, and a green light indicates charging is complete. Charging time is approximately 2 hours for 4-10 hours of use.

Cleaning and Storage

• Wipe the light with a soft, damp cloth to remove dirt and debris. Do not use abrasive cleaners or solvents.
• Store the light in a cool, dry place when not in use, away from direct sunlight and extreme temperatures.
• For long-term storage, charge the battery every 3-6 months to maintain its health.

Image: The DON PEREGRINO B2 Bike Tail Light shown on a bicycle during rainfall, highlighting its IPX4 waterproof capability.

Troubleshooting

Specifications

Safety Information

• Always ensure the light is securely mounted before riding.
• Do not look directly into the light when it is on, as it can cause temporary vision impairment.
• While the light is waterproof (IPX4), avoid submerging it in water.
• Keep out of reach of children.
• Regularly check the battery level and recharge as needed to ensure continuous visibility.
• This light is intended to enhance visibility and should be used in conjunction with other appropriate safety measures, such as reflective clothing and adherence to traffic laws.

Image: Cyclists using tail lights during daytime, illustrating that a significant percentage of cycling accidents occur in daylight, highlighting the need for continuous visibility.

Warranty and Support

DON PEREGRINO stands behind the quality of its products. For warranty information, technical support, or any inquiries regarding your B2 Bike Tail Light, please contact DON PEREGRINO customer service through the retailer where you purchased the product or visit the official DON PEREGRINO website.

Please retain your proof of purchase for warranty claims.