1. Important Safety Instructions
Always observe the following safety precautions when operating the Einhell TC-RH 1600 rotary hammer drill to prevent electric shock, injury, and fire. Keep these instructions for future reference.
General Power Tool Safety
- Work Area Safety: Keep your work area clean and well-lit. Cluttered or dark areas invite accidents. Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases, or dust.
- Electrical Safety: Power tool plugs must match the outlet. Never modify the plug in any way. Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators.
- Personal Safety: Always wear eye protection, hearing protection, and a dust mask. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert, watch what you are doing, and use common sense.
- Tool Use and Care: Do not force the power tool. Use the correct power tool for your application. Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
Rotary Hammer Specific Safety
- Wear ear protectors when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles supplied with the tool. Loss of control can result in personal injury.
- Hold power tool by insulated gripping surfaces when performing an operation where the cutting accessory may contact hidden wiring or its own cord.
- Secure the workpiece. Use clamps or a vise to hold the workpiece. This is safer than using your hand and it frees both hands to operate the tool.
- Beware of dust. Drilling or chiseling concrete and masonry can create dust containing silica, which can cause respiratory diseases. Use dust extraction and wear a suitable dust mask.
2. Product Overview and Included Items
The Einhell TC-RH 1600 is a powerful rotary hammer drill designed for drilling, impact drilling, and chiseling in concrete, masonry, and other tough materials. It features an SDS-plus chuck for quick tool changes and a robust pneumatic impact mechanism.
Image 2.1: The Einhell TC-RH 1600 rotary hammer drill shown with its robust carrying case. The drill features a red and black housing with an auxiliary handle attached.
Included Items:
- Einhell TC-RH 1600 Rotary Hammer Drill
- Auxiliary Handle
- Depth Stop
- Carrying Case
- 7-piece SDS-plus Drill Bit Set (2x 6mm, 2x 8mm, 10mm, 12mm, 14mm)
Image 2.2: A 7-piece SDS-plus drill bit set, including various diameters for concrete and reinforced concrete applications. The bits feature carbide tips for durability.
3. Technical Specifications
| Feature | Specification |
|---|---|
| Model | TC-RH 1600 |
| Power Input | 1600 W |
| Voltage | 240 V |
| Impact Energy | 4 J |
| Chuck Type | SDS-plus |
| Functions | Drilling, Impact Drilling, Chiseling (with/without lock) |
| Safety Feature | Overload safety clutch |
| Impact Mechanism | Pneumatic |
| Speed Control | Electronic speed adjustment |
| Vibration Damping | Vibration-damped main handle |
| Gear Housing | Robust aluminum |
4. Setup
4.1 Attaching the Auxiliary Handle
The auxiliary handle provides better control and safety during operation. Loosen the auxiliary handle by turning it counter-clockwise. Slide it over the chuck and position it to your desired angle. Tighten it securely by turning clockwise.
4.2 Inserting/Removing SDS-plus Tools
- Cleaning: Clean the shank of the SDS-plus tool and apply a thin layer of grease.
- Insertion: Push the tool into the SDS-plus chuck while rotating it slightly until it locks into place. Pull the tool to check if it is securely seated.
- Removal: Pull back the locking sleeve on the chuck and pull the tool out.
Note: The SDS-plus system allows for axial movement of the tool, which is normal and necessary for the impact mechanism.
4.3 Setting the Depth Stop
Insert the depth stop into the designated hole on the auxiliary handle. Adjust the depth stop to the desired drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
5. Operating Instructions
5.1 Selecting Operating Mode
The TC-RH 1600 offers four functions, selected via a rotary switch:
- Drilling: For drilling in wood, metal, or plastic without impact.
- Impact Drilling: For drilling in concrete, masonry, and stone with impact.
- Chiseling (with lock): For chiseling applications where the chisel position needs to be fixed.
- Chiseling (without lock): For chiseling applications allowing free rotation of the chisel for easier positioning.
Caution: Always ensure the tool is unplugged before changing the operating mode.
5.2 Starting and Stopping the Tool
- To Start: Press the ON/OFF switch.
- To Stop: Release the ON/OFF switch. For continuous operation, press the ON/OFF switch and then the lock-on button. To release, press the ON/OFF switch again.
5.3 Speed Control
The tool features electronic speed control. The speed can be adjusted by varying the pressure on the ON/OFF switch. Lighter pressure results in lower speed, while full pressure provides maximum speed. This allows for fine adjustment during delicate work.
6. Maintenance and Cleaning
Regular maintenance ensures the longevity and optimal performance of your Einhell TC-RH 1600 rotary hammer drill. Always unplug the tool from the power supply before performing any maintenance or cleaning.
6.1 General Cleaning
- Keep all safety devices, air vents, and the motor housing free of dirt and dust. Wipe the tool with a clean cloth.
- Do not use aggressive cleaning agents or solvents, as these can damage plastic parts.
- Clean the SDS-plus chuck regularly and apply a thin layer of grease to the moving parts to ensure smooth operation.
6.2 Carbon Brush Inspection
The carbon brushes are subject to wear. If the motor sparks excessively or the tool stops working, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified technician.
6.3 Storage
Store the tool and its accessories in the provided carrying case in a dry, frost-free place, out of reach of children. Ensure the tool is clean before storage.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tool does not start. | No power supply; faulty switch; worn carbon brushes. | Check power connection; have switch or carbon brushes checked by a qualified technician. |
| Low impact power. | Incorrect operating mode; worn impact mechanism. | Ensure correct mode (impact drilling/chiseling) is selected; contact service for inspection. |
| Excessive vibration. | Damaged accessory; internal fault. | Check accessory for damage and replace if necessary; contact service. |
| Tool overheats. | Overloading; blocked ventilation slots. | Reduce load; clean ventilation slots; allow tool to cool down. |
For problems not listed here or if solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
8. Warranty and Support
Einhell products are manufactured with care and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website for contact information.
Online Resources: www.einhell.com
