1. Safety Information
Please read and understand all instructions before assembly and use of this product. Retain this manual for future reference.
- Weight Capacity: Do not exceed the maximum weight capacity of 55 lb (25 kg) for the tabletop and 55 lb (25 kg) for the lower shelf. Overloading can cause damage or injury.
- Anti-Tip Kit: Always install the included anti-tip kit to prevent the table from tipping over, especially in households with children or pets. Securely fasten it to a wall stud.
- Stable Placement: Ensure the table is placed on a flat, level surface. Use the adjustable feet to stabilize the table on uneven floors.
- Assembly: Assemble the product according to the instructions provided. Do not use power tools for assembly unless specifically instructed, as this may overtighten screws and damage components.
- Maintenance: Regularly check all screws and connections to ensure they remain tight.
Figure 1: Anti-Tip Kit and Adjustable Feet for Stability
2. Package Contents
Before beginning assembly, ensure all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- 1 x Console Table (disassembled components)
- 1 x Accessory Kit (screws, bolts, tools if applicable)
- 1 x Anti-Tip Kit
- 1 x Instruction Manual
3. Setup and Assembly Instructions
Assembly of the VASAGLE Console Table is designed to be straightforward. Follow the numbered steps and diagrams provided in the included instruction manual for best results. Below are general guidelines:
- Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
- Identify Parts: Refer to the parts list in your physical manual to identify each component (e.g., A, B, C for panels; 1, 2, 3 for screws).
- Assemble Frame: Begin by assembling the steel frame components using the provided screws and tools. Do not fully tighten screws until all parts are loosely connected.
- Attach Shelves: Secure the particleboard shelves to the assembled frame. Ensure they are oriented correctly.
- Tighten All Screws: Once all components are in place, gradually tighten all screws until secure. Avoid overtightening.
- Install Anti-Tip Kit: Attach the anti-tip kit to the rear of the table and securely fasten it to a wall stud using appropriate hardware. This is a critical safety step.
- Adjust Feet: If the table wobbles, adjust the leveling feet at the bottom of the legs until the table is stable on your floor.
Figure 2: Fully Assembled Console Table
Figure 3: Sturdy Build and Easy-to-Clean Surface
4. Operating and Usage
The VASAGLE Console Table is designed for versatile use in various home environments.
- Placement: Ideal for entryways, living rooms, hallways, or behind a sofa.
- Display: Use the two shelves to display decorative items, picture frames, plants, books, or store small essentials.
- Weight Distribution: Distribute weight evenly across the tabletop and shelves to maintain stability and prevent damage.
- Stability: Periodically check the adjustable feet to ensure the table remains level and stable.
Figure 4: Console Table in an Entryway Setting
Figure 5: Console Table Used Behind a Sofa
5. Maintenance
Proper care will extend the life and appearance of your console table.
- Cleaning: Wipe the surfaces with a soft, damp cloth. Avoid using harsh chemicals or abrasive cleaners, which can damage the finish.
- Spills: Clean up spills immediately to prevent staining or damage to the particleboard.
- Inspection: Periodically check all fasteners (screws, bolts) to ensure they are tight. Retighten if necessary.
- Environment: Avoid placing the table in direct sunlight or near heat sources, as this can cause fading or warping.
6. Troubleshooting
If you encounter any issues with your console table, refer to the following common solutions:
- Table is Wobbly:
- Ensure all assembly screws are securely tightened.
- Adjust the leveling feet at the bottom of each leg until the table is stable on the floor.
- Verify the table is placed on a flat surface.
- Missing Parts:
- Double-check all packaging materials to ensure no small parts were overlooked.
- Contact VASAGLE customer support with your model number and a description of the missing part.
- Difficulty Assembling:
- Review the assembly diagrams and steps in the physical instruction manual carefully.
- Ensure components are oriented correctly before tightening screws.
7. Specifications
| Brand | VASAGLE |
| Model Number | ULNT130K01V1 |
| Product Dimensions (D x W x H) | 7.9"D x 31.5"W x 31.5"H (20 cm x 80 cm x 80 cm) |
| Item Weight | 14 Pounds (6.35 kg) |
| Maximum Weight Recommendation | 55 lb (25 kg) per shelf |
| Color | Rustic Brown + Ink Black |
| Material Type | Engineered Wood (Particleboard), Alloy Steel |
| Included Components | Console Table, Accessory Kit, Anti-Tip Kit, Instructions |
Figure 6: Product Dimensions and Weight Capacity
8. Warranty Information
Specific warranty details for the VASAGLE Console Table ULNT130K01V1 may vary by region and retailer. Please refer to the warranty card included with your product or contact your point of purchase for detailed information regarding warranty coverage and terms.
9. Customer Support
For assistance with assembly, missing parts, or any other product-related inquiries, please contact VASAGLE customer support. Refer to the contact information provided in your product packaging or visit the official VASAGLE website for support options.
When contacting support, please have your model number (ULNT130K01V1) and purchase details readily available.
