T329E Soft Start Controller User Manual

1. Introduction

This manual provides essential information for the safe and effective use of the QXYSLHKC T329E Soft Start Controller. This electronic board is specifically designed for applications requiring a magnetic limit switch, such as sliding gate openers, providing precise control and stable operation.

Package Contents:

• 1 x T329E Controller Board
• 1 x Remote Control (AA battery not included)

2. Key Features

• Precise Positioning: Utilizes high-precision sensing technology for accurate detection of mechanical component positions with minimal deviation, ensuring precise equipment movement.
• Sensitive Response: Features a microswitch design for millisecond-level fast response, instantly switching circuit states upon sensing the target position.
• Easy Installation: Equipped with universal mounting accessories and industry-standard mounting holes, allowing for straightforward installation on various devices.
• Stable Signal: Provides a stable output signal with strong anti-interference capabilities, preventing misoperation and ensuring reliable control system performance.
• Wide Application: Ideal for position control and limit protection in diverse mechanical equipment, including machine tools, cranes, automated production lines, and elevators.

3. Technical Specifications

4. Setup and Installation

Before installation, ensure the power supply is disconnected to prevent electric shock. It is recommended that installation be performed by a qualified professional.

4.1. General Board Overview

Figure 4.1: Overall view of the T329E Soft Start Controller board, showing various components and connection terminals.

4.2. Connecting Power and Motor

Connect the main power supply (AC220V) to the designated 'N', 'AC220V', and 'L' terminals. Connect the motor to the 'MOTO' terminals. Ensure all connections are secure and correctly polarized.

Figure 4.2: Close-up view of the power input terminals (N, AC220V, L) and motor output terminals (MOTO), along with the relays.

4.3. Limit Switch and Control Connections

Connect your magnetic limit switches to the 'LIMIT' terminals. Additional control inputs (e.g., for remote control receiver, push buttons) can be connected to the 'KEY' and other designated terminals. Refer to the silkscreen labels on the board for specific pin functions.

Figure 4.3: Angled view highlighting the various terminal blocks for limit switches, key inputs, and other control signals.

4.4. DIP Switch and Potentiometer Settings

The board features DIP switches and potentiometers for configuring operational parameters such as soft start/stop time, force, and direction. Adjust these settings according to your specific application requirements.

Figure 4.4: Detailed view of the DIP switches (red block) and adjustable potentiometers for fine-tuning controller behavior.

1. DIP Switches: Consult the silkscreen next to the DIP switches for their specific functions (e.g., 1: RF ON/C, 2: AUTO CL, 3: SOFT STOP, 4: MAX CURT, 5: SET FORCE, 6: DIRECTION).
2. Potentiometers: Adjust these for parameters like motor force, speed, or other timing functions as indicated on the board.

5. Operating Instructions

Once the controller is correctly installed and configured, power on the system. The controller will manage the soft start and stop of the motor based on the configured settings and inputs from the limit switches or remote control.

5.1. Remote Control Operation

The included remote control allows for wireless operation of the connected motor. Ensure a 1x AA battery is inserted into the remote control. Press the designated buttons on the remote to initiate motor movement (e.g., open, close, stop).

5.2. Manual Operation

If manual control buttons are connected to the 'KEY' terminals, these can be used to operate the motor directly. Refer to your system's wiring diagram for specific button assignments.

5.3. Limit Switch Functionality

The magnetic limit switches define the operational boundaries of the motor. When the motor reaches a limit switch, the controller will automatically stop the motor to prevent over-travel or damage.

6. Maintenance

Regular maintenance ensures the longevity and reliable operation of your T329E controller.

• Cleaning: Periodically clean the board with a soft, dry brush or compressed air to remove dust and debris. Ensure power is disconnected before cleaning.
• Inspection: Regularly inspect all wiring connections for looseness or corrosion. Check for any visible damage to components on the board.
• Environment: Ensure the controller is installed in a dry, well-ventilated area, away from excessive heat, moisture, and corrosive substances.

7. Troubleshooting

If you encounter issues with your T329E controller, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact customer support.

8. Warranty and Support

Information regarding product warranty and specific support contacts is not provided in this manual. Please refer to your purchase documentation or contact the seller/manufacturer directly for warranty details and technical assistance.