1. Product Overview
This manual provides essential information for the safe and efficient use of the LEDAANAM AED36-24VLSJ 36W24V Constant Voltage Driver Power Supply. This device is designed to convert AC input voltage to a stable 24V DC output, suitable for various LED lighting applications, including LED strips, bathroom mirrors, and makeup mirrors.
Figure 1: Front view of the LEDAANAM AED36-24VLSJ Constant Voltage Driver, showing product labels and specifications.
2. Safety Information
WARNING: Risk of Electric Shock. Installation should only be performed by a qualified electrician or trained professional.
- Always disconnect power at the circuit breaker before installation, maintenance, or troubleshooting.
- Ensure the input voltage matches the specifications of the driver (220-240V AC).
- Do not exceed the maximum output power (36W) or current (1.5A) to prevent damage to the driver and connected devices.
- Protect the unit from moisture and extreme temperatures outside its operating range.
- Ensure proper ventilation around the driver to prevent overheating.
- This device is designed for built-in installation. Follow all local electrical codes and regulations.
3. Product Features
- Constant Voltage Source: Provides a stable 24V DC output.
- Wide Input Voltage: Operates on 220-240V AC input.
- High Efficiency: Up to 87% efficiency for energy savings.
- Comprehensive Protection: Includes overload protection, short circuit protection, over voltage protection, over temperature protection, and over current protection.
- High Power Factor: 0.9 power factor.
- Compact Design: Overall dimensions of 135.5mm x 47.5mm x 26.3mm for built-in applications.
- Certifications: CE and ROHS certified.
- Long Lifespan: Rated for 30,000 hours.
4. Specifications
| Parameter | Value |
|---|---|
| Model | AED36-24VLSJ |
| Type | Constant Voltage Driver |
| Input Voltage | 220-240V AC |
| Input Frequency | 50 Hz |
| Output Voltage | 24V DC |
| Output Current | 1.5 A |
| Maximum Output Power | 36W |
| Efficiency | 87% |
| Power Factor | 0.9 |
| Electromagnetic Compatibility | EN61547, EN61000 |
| Protection Class | 2 |
| Operating Temperature | 45 °C |
| Installation Location | Built-in |
| Applicable Lamps | LED lamps, bathroom mirrors, makeup mirrors |
| Overall Dimensions (L*W*H) | 135.5 x 47.5 x 26.3 mm |
| Lifespan | 30,000 hours |
| Certifications | CE, ROHS |
| Item Weight | 50 Grams (1.76 ounces) |
5. Setup and Installation
Before beginning installation, ensure all power is disconnected at the main circuit breaker. This constant voltage driver is designed for built-in installation within suitable enclosures or fixtures.
5.1 Wiring Connections
The driver features clearly marked input (PRI) and output (SEC) terminals. Refer to the labels on the unit for correct polarity and connection points.
- Input (PRI): Connect the AC mains power supply (220-240V) to the input terminals. The terminals are typically marked 'L' (Live) and 'N' (Neutral). The recommended wire gauge for input is 0.5-1.0mm².
- Output (SEC): Connect your 24V DC LED lighting load to the output terminals. Ensure correct polarity: '+' to '+' and '-' to '-'. The recommended wire gauge for output is 0.5-1.0mm².
Figure 2: Side view of the driver, illustrating the green terminal blocks for secure wiring connections.
Figure 3: Exploded view showing the driver, its terminal covers, and mounting screws, indicating how the unit can be secured.
5.2 Mounting
The driver is designed for built-in applications. Secure the unit using appropriate screws through the designated mounting points. Ensure the mounting surface is stable and allows for adequate heat dissipation.
6. Operating Instructions
Once properly installed and wired, the LEDAANAM AED36-24VLSJ Constant Voltage Driver operates automatically. Upon applying AC power to the input terminals, the driver will provide a stable 24V DC output to the connected LED load. No user interaction is required for its operation beyond the initial setup.
7. Maintenance
The LEDAANAM AED36-24VLSJ Constant Voltage Driver is designed for long-term, maintenance-free operation. However, periodic checks are recommended:
- Ensure the unit is free from dust and debris, which can impede heat dissipation.
- Verify that all electrical connections remain secure and free from corrosion.
- Do not attempt to open or service the unit. There are no user-serviceable parts inside.
- If the unit shows signs of damage or malfunction, disconnect power immediately and consult a qualified professional.
8. Troubleshooting
If you experience issues with your LEDAANAM Constant Voltage Driver, consider the following:
8.1 No Light Output
- Check Power Supply: Ensure the AC mains power is active and correctly connected to the driver's input terminals.
- Verify Connections: Confirm all wiring connections (input and output) are secure and correctly polarized.
- Inspect LED Load: Ensure the connected LED lights are functioning correctly and are not damaged.
- Check Load Compatibility: Confirm the total wattage of the connected LEDs does not exceed the driver's maximum output power of 36W.
8.2 Flickering Lights
- Stable Input Voltage: Ensure the input AC voltage is stable and within the specified range (220-240V).
- Secure Connections: Loose connections can cause flickering. Re-check all wiring.
- Overload: If the connected load is close to or exceeds 36W, the driver's protection mechanisms might be activating. Reduce the load.
If problems persist after performing these checks, discontinue use and contact a qualified electrician or the manufacturer for assistance.
9. Warranty and Support
Specific warranty information for this product was not provided in the available data. For details regarding warranty coverage, technical support, or replacement parts, please contact the manufacturer, LEDAANAM, or your point of purchase directly.