1. Introduction
This manual provides essential information for the safe and efficient use of your Elica 90cm BLDC Filterless Autoclean Kitchen Chimney. Please read all instructions carefully before installation, operation, or maintenance. Keep this manual for future reference.
Safety Information
- Ensure the power supply matches the specifications indicated on the appliance rating label.
- Installation must be performed by a qualified technician in accordance with local regulations.
- Do not operate the chimney without the oil collector properly installed.
- Regular cleaning is crucial to prevent fire hazards from grease accumulation.
- Keep children away from the appliance during operation and cleaning.
- Do not flambé under the chimney.
2. Product Overview
The Elica FLAT FL 900 MAX BLDC HAC LTW MS NERO is a 90cm wall-mounted T-shape kitchen chimney designed for efficient smoke and odor extraction. It features advanced BLDC motor technology, filterless design, and an auto-clean function for minimal maintenance.
Key Features
- BLDC Motor: Energy-efficient and quiet operation.
- Filterless Technology: Eliminates the need for frequent filter cleaning.
- Heat Auto Clean: Simplifies internal cleaning by melting and collecting grease.
- 1600 m3/hr Suction Capacity: Powerful extraction for effective smoke removal.
- 9-Speed Touch Control with RPM Display: Precise control over suction levels.
- Motion Sensor Control: Hands-free operation for convenience.
- LED Lamp: Provides bright illumination over the cooking area.
- Convertible Installation: Supports both ducted and ductless (recirculation) modes.
Components
Your chimney package includes:
- Elica Kitchen Chimney Unit
- Oil Collector Tray
- User Manual (this document)
- Warranty Card
- Installation Kit (may vary based on region)
Figure 2.1: Elica 90cm BLDC Filterless Autoclean Kitchen Chimney, front view.
Figure 2.2: Illustration of Heat Auto Clean and Filterless Technology features.
3. Installation
The Elica chimney can be installed in two modes: ducted or ductless (recirculation). Professional installation is recommended.
Installation Modes
- Ducted Mode: Air is extracted through an external duct pipe and expelled outside. This is the most efficient method for smoke and odor removal.
- Ductless Mode: Air is filtered through an optional charcoal filter (sold separately) to remove odors and grease, then recirculated back into the kitchen. This mode is suitable when external ducting is not feasible.
Figure 3.1: Visual representation of ducted and ductless installation options.
Dimensions and Space Requirements
The chimney measures 90 cm (Length) x 45 cm (Height) x 45 cm (Depth). Ensure adequate cabinet space and clearance for proper fit and operation.
- Minimum cabinet space requirement: 91 cm width.
- Leave a 0.5 cm (5mm) gap on each side for perfect fitting.
Figure 3.2: Detailed product dimensions and recommended installation gaps.
4. Operation
Your Elica chimney offers intuitive controls for a seamless cooking experience.
Control Panel
The chimney features a touch control panel with an RPM display for precise fan speed adjustments. Refer to the control panel diagram for specific button functions.
Figure 4.1: Touch Control Panel for power, fan speed, and lighting.
Motion Sensor Control
The motion sensor allows for hands-free operation. Wave your hand left or right in front of the sensor to change the fan speed.
Figure 4.2: Demonstrating motion sensor control for fan speed adjustment.
Fan Speed Settings
The chimney offers 9 fan speed settings. Adjust the speed based on the intensity of cooking fumes. Higher speeds are recommended for heavy frying or strong odors.
LED Lighting
Press the light button on the touch control panel or use the motion sensor (if applicable) to turn the integrated LED lamp on or off. The LED lamp provides efficient illumination of your cooking area.
Figure 4.3: The integrated LED lamp illuminating the cooking surface.
5. Maintenance and Cleaning
Regular maintenance ensures optimal performance and longevity of your Elica chimney.
Heat Auto Clean Function
The Heat Auto Clean function uses heat to melt accumulated grease, which then drains into the oil collector. Activate this function regularly, depending on your cooking frequency.
- To activate, press the dedicated auto-clean button on the control panel.
- The process typically takes a few minutes.
- Ensure the oil collector is in place before starting the auto-clean cycle.
Figure 5.1: The Heat Auto Clean process with grease collection in the oil tray.
Cleaning the Oil Collector
The oil collector tray should be emptied and cleaned regularly. Frequency depends on usage, but it is recommended to check it weekly.
- Carefully remove the oil collector tray from the chimney.
- Dispose of the collected grease responsibly.
- Wash the tray with warm, soapy water. Rinse thoroughly and dry before reinserting.
External Surface Cleaning
Clean the exterior surfaces of the chimney with a soft cloth and a mild, non-abrasive cleaning agent. Avoid harsh chemicals or abrasive materials that could damage the finish.
Charcoal Filter Replacement (Ductless Mode Only)
If operating in ductless mode, the charcoal filter needs periodic replacement. The replacement frequency depends on usage, typically every 3-6 months. Refer to the charcoal filter's specific instructions for replacement details.
6. Troubleshooting
This section addresses common issues you might encounter with your Elica chimney.
| Problem | Possible Cause | Solution |
|---|---|---|
| Chimney not turning on | No power supply; loose connection; tripped circuit breaker. | Check power plug, circuit breaker. Ensure proper connection. |
| Low suction power | Oil collector full; ducting obstruction; charcoal filter clogged (ductless mode). | Empty and clean oil collector. Check ducting for blockages. Replace charcoal filter if necessary. |
| Unusual noise during operation | Loose components; foreign object in fan; motor issue. | Ensure all parts are secure. Turn off and inspect for obstructions. If noise persists, contact service. |
| Auto-clean not effective | Excessive grease buildup; oil collector not properly installed. | Run auto-clean more frequently. Ensure oil collector is correctly seated. |
| Motion sensor unresponsive | Sensor obstructed or dirty; sensor malfunction. | Clean the sensor area. Ensure no objects are blocking the sensor. If issue continues, use touch controls or contact service. |
If the problem persists after attempting these solutions, please contact Elica customer support.
7. Specifications
Technical specifications for the Elica FLAT FL 900 MAX BLDC HAC LTW MS NERO kitchen chimney.
| Feature | Specification |
|---|---|
| Model Number | FLAT FL 900 MAX BLDC HAC LTW MS NERO |
| Chimney Type | T-Shape, Wall Mounted Canopy Hood |
| Size | 90 cm |
| Product Dimensions (L x H x D) | 90 cm x 45 cm x 45 cm |
| Suction Power | 1600 m3/hr |
| Motor Type | BLDC Motor |
| Filter Type | Filterless |
| Control Type | 9 Speed Touch Control with RPM Display + Motion Sensor Control |
| Noise Level | 48 Decibels |
| Power Requirement | 220 Volts (AC) |
| Wattage | 130 Watts |
| Light Source | LED Lamp |
| Material Type | Stainless Steel |
| Color | Black |
| Item Weight | 15.2 Kilograms |
8. Warranty and Support
Elica provides comprehensive warranty and support for your kitchen chimney.
Warranty Information
- Motor Warranty: Lifetime (15 Years)
- Comprehensive Warranty: 5 Years (covers PCB & Glass)
Please retain your purchase receipt and warranty card for any warranty claims. The warranty covers manufacturing defects under normal use conditions. For detailed terms and conditions, refer to the warranty card included with your product.
Customer Support
For technical assistance, service requests, or any queries regarding your Elica kitchen chimney, please contact Elica customer support. Contact details can be found on your warranty card or the official Elica website.
