1. Product Overview
This car cover is designed to provide comprehensive protection for your Hyundai Palisade (2019-2025) against various environmental elements. Constructed from durable Oxford cloth and thick cotton, it offers superior resistance to rain, snow, hail, dust, and UV radiation, while also preventing scratches to your vehicle's paintwork.
It is suitable for all seasons, ensuring your vehicle remains clean and protected year-round.
Figure 1.1: Front view of the Car Cover Hail Protector, showcasing its quilted design and reflective yellow stripes.
Figure 1.2: Various angles of the car cover installed, demonstrating its full coverage and tailored fit.
2. Key Features
- Comprehensive Protection: Made of Oxford cloth and thick cotton, effectively protects your car from rain, snow, and hail, preventing paint damage.
- Dustproof: Effectively prevents dust from entering the car, keeping both the interior and exterior clean.
- Night Safety: Equipped with reflective strips to improve visibility when parking at night, reducing the risk of accidental scratches.
- Convenient Design: Easy to install, remove, and clean.
- Windproof: Features windproof ropes to secure the cover, preventing it from being blown away in strong winds.
- Durable Material: Thickened multi-layer structure designed to withstand severe weather conditions like typhoons and heavy snow.
- All-Season Use: Suitable for use in spring, summer, autumn, and winter, offering protection against various seasonal elements.
Figure 2.1: Visual representation of the car cover's protective capabilities against hail, sun, snow, and dust.
Figure 2.2: Depiction of the car cover's effectiveness across different seasons: spring, summer, autumn, and winter.
3. Setup Instructions
Before setting up the car cover, ensure your vehicle is clean and free of any sharp debris (such as sand or small stones) on its surface to prevent scratching the paint during installation.
- Unfold the Cover: Carefully unfold the car cover and identify the front and rear sections. The reflective strips are typically positioned towards the front and rear for enhanced visibility.
- Position on Vehicle: Place the cover over your vehicle, starting from the front bumper and gradually pulling it over the entire car. Ensure it is centered and covers all surfaces evenly.
- Secure with Elastic Corners: The cover features elasticized hems at the front and rear. Gently pull these hems under the bumpers to ensure a snug fit.
- Utilize Windproof Ropes and Hooks: Locate the integrated windproof ropes and hooks. Secure these ropes to the wheels or other suitable anchor points under the vehicle to prevent the cover from being lifted by wind.
Figure 3.1: Details of the hook fixation system, upgraded windproof rope, and elastic corner design for secure installation.
4. Operating Instructions
Once the car cover is installed, it requires minimal operation. Its primary function is passive protection.
- Daily Use: For daily protection, simply ensure the cover is properly secured using the elastic hems and windproof ropes.
- Removal: To remove the cover, unhook the windproof ropes from the wheels, then gently lift the cover from the rear, folding it towards the front. Once off the vehicle, fold it neatly for storage.
- Reflective Strips: The reflective strips are always active when the cover is on the vehicle, enhancing visibility in low-light conditions.
5. Maintenance
Proper maintenance will extend the lifespan of your car cover and ensure its continued effectiveness.
- Cleaning: If the cover becomes dirty, it can be wiped clean with a damp cloth. For heavier soiling, a mild soap solution can be used, followed by thorough rinsing.
- Drying: After cleaning or exposure to rain/snow, ensure the car cover is completely dry before folding and storing it. This prevents mildew and unpleasant odors.
- Storage: When not in use, store the dry car cover in the provided storage bag in a cool, dry place away from direct sunlight.
Figure 5.1: Close-up of the upgraded material, highlighting its multi-layer waterproof and fireproof properties, along with a soft lining.
6. Troubleshooting
This section addresses common issues you might encounter with your car cover.
| Problem | Possible Cause | Solution |
|---|---|---|
| Cover blows off in wind. | Windproof ropes not secured or not tight enough. | Ensure all windproof ropes are securely fastened to the wheels or other anchor points. Tighten them as much as possible without damaging the cover. |
| Scratches appear on car paint after cover use. | Vehicle surface was not clean before covering; debris trapped underneath. | Always ensure the vehicle surface is clean and free of dust, dirt, or sharp particles before applying the cover. |
| Cover feels damp or smells musty after storage. | Cover was stored while still damp. | Always ensure the cover is completely dry before folding and storing it in its bag. Air it out thoroughly if it becomes damp. |
7. Specifications
- Product Name: Outdoor Waterproof and Anti-Hail Car Cover
- Material: Oxford cloth + thick cotton
- Color: Black (specific to this model variant)
- Applicable Model: For Hyundai Palisade 2019-2025
- Special Features: Scratch resistant, UV Protection, Windproof, Dustproof, Hail protection
- Weight: Approximately 3.5 kg
- Package Includes: Car cover x 1, storage bag x 1
Figure 7.1: Demonstrating the durable and thick material construction of the car cover.
Figure 7.2: Illustrates the car cover's adaptability to various vehicle types, including hatchbacks, sedans, SUVs, and business cars.
8. Warranty and Support
No specific warranty information or dedicated support contact details are provided within this instruction manual. For any questions or concerns regarding your product, please refer to the seller or retailer from whom the product was purchased.
