1. Product Overview
The DXRacer Prince Series L Gaming Chair is designed for ergonomic comfort and durability, suitable for extended gaming or work sessions. It features a winged seat base, 2D adjustable armrests, a reclining backrest, and includes a headrest pillow and lumbar support cushion for enhanced posture and comfort.
Front view of the DXRacer Prince Series L Gaming Chair, showcasing its ergonomic design and included cushions.
2. Setup and Assembly
Follow these steps to assemble your DXRacer Prince Series L Gaming Chair. It is recommended to have a clear, spacious area for assembly.
2.1 Assembly Video Guide
Official DXRacer Prince Series installation video, demonstrating the complete assembly process.
2.2 Step-by-Step Instructions
- Attach Casters to the Base: Insert the five casters into the holes at the end of each leg of the chair base. Ensure they are securely clicked into place.
- Install Gas Lift: Place the gas lift cylinder into the center hole of the assembled chair base. Cover it with the telescopic dust cover.
- Mount Mechanism to Seat: Align the seat mechanism with the screw holes on the underside of the seat base. Secure it with the provided screws, ensuring the front of the mechanism faces the front of the seat.
- Attach Backrest to Seat: Connect the backrest to the seat base using the side brackets. Secure with screws, then cover the brackets with the plastic covers.
- Connect Seat Assembly to Base: Carefully place the assembled seat and backrest onto the gas lift cylinder. Apply gentle downward pressure to secure it.
- Attach Cushions: Secure the lumbar support cushion and headrest pillow using their elastic straps. The headrest pillow attaches to the top of the backrest, and the lumbar cushion can be adjusted along the backrest for optimal support.
Illustration of the chair's internal steel frame and high-density foam construction.
3. Operating Instructions
Your DXRacer Prince Series L Gaming Chair offers several adjustable features to customize your seating experience.
3.1 Height Adjustment
To adjust the chair's height, locate the lever on the right side, beneath the seat. Pull the lever upwards while seated to lower the chair, or stand up and pull the lever to raise it. Release the lever at your desired height.
3.2 Backrest Recline
The backrest can recline from 90° to 135°. To recline, pull the lever on the left side of the seat upwards and lean back. Release the lever to lock the backrest in position. To return to an upright position, pull the lever and lean forward slightly.
Diagram illustrating the 90° to 135° reclining backrest and 15° rocking function.
3.3 2D Armrest Adjustment
The 2D armrests can be adjusted vertically. To adjust the height, locate the button on the side of each armrest. Press and hold the button, then move the armrest up or down to your preferred position. Release the button to lock it.
Close-up of the 2D armrest, showing the height adjustment mechanism.
3.4 Rocking Function
To activate the rocking function, pull the lever on the left side of the seat outwards. To lock the chair in an upright position, push the lever inwards. The tension of the rocking mechanism can be adjusted by turning the knob located underneath the seat.
4. Maintenance
Proper care will extend the life and appearance of your DXRacer gaming chair.
- Cleaning: Wipe clean with a damp cloth. For faux leather, use a mild soap solution if necessary, then wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and bolts to ensure they are tight. Re-tighten if loose to maintain stability and safety.
- Caster Care: Keep casters free of hair and debris to ensure smooth movement.
- Avoid Direct Sunlight: Prolonged exposure to direct sunlight can cause the faux leather to fade or crack.
5. Troubleshooting
If you encounter any issues with your DXRacer Prince Series L Gaming Chair, refer to the following common solutions:
- Chair Not Adjusting Height: Ensure the gas lift lever is fully engaged. If the issue persists, the gas lift cylinder may need replacement.
- Chair Squeaks: Check all bolted connections and tighten any loose screws. A small amount of silicone lubricant can be applied to moving parts if necessary, avoiding contact with upholstery.
- Casters Not Rolling Smoothly: Remove any hair or debris from the caster wheels. If a caster is damaged, it may need replacement.
- Backrest Not Reclining/Locking: Verify that the recline lever is functioning correctly and not obstructed. Ensure no foreign objects are preventing the mechanism from engaging.
For further assistance, please contact DXRacer customer support.
6. Specifications
Key specifications for the DXRacer Prince Series L Gaming Chair:
Detailed dimensions of the DXRacer Prince Series L Gaming Chair.
| Feature | Detail |
|---|---|
| Brand | DXRacer |
| Model Name | Prince Series |
| Color | Black/Blue |
| Material | Faux Leather, Foam, Steel |
| Product Dimensions | 27.6"D x 27.6"W x 52"H |
| Maximum Weight Recommendation | 200 Pounds |
| Reclining Angle | 90° to 135° |
| Armrest Type | 2D Adjustable |
| Included Components | Headrest Pillow, Lumbar Cushion |
| Item Weight | 46.3 pounds |
| UPC | 810027593603 |
7. Warranty and Support
DXRacer is committed to providing high-quality products and customer satisfaction.
- Returns: This product is eligible for 30-day easy returns. Please refer to your purchase platform's return policy for detailed instructions.
- Customer Support: For any questions, technical assistance, or warranty claims, please contact DXRacer International customer support. You can find contact information on the official DXRacer website or through your purchase platform.