Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your SelectBlinds Classic Cordless Woven Wood Shades. These shades are crafted from natural bamboo, reeds, and woods, offering a blend of natural beauty and modern functionality for your home.
Image: A SelectBlinds Classic Cordless Woven Wood Shade in Primrose color, installed in a dining room setting, showcasing its natural texture and light filtering.
Safety Information
Your SelectBlinds Classic Cordless Woven Wood Shades feature a cordless lift system designed for enhanced safety. This design eliminates hazardous cords, making them ideal for homes with children and pets.
- Always ensure the shade operates smoothly and is not obstructed.
- Keep the shade clean and free from debris that could interfere with its mechanism.
Image: A split image illustrating the light control and privacy provided by the shades on one side, and highlighting the child-safe cordless lift system on the other.
Package Contents
Upon unpacking, please verify that all components are present:
- Woven Wood Shade (with integrated cordless lift system)
- Mounting Hardware (brackets, screws, anchors)
- Installation Instructions
- 6-inch Valance (pre-attached or separate, depending on design)
Setup and Installation
1. Measuring for Your Shades
Accurate measurements are crucial for a proper fit. These shades are custom-made to 1/8-inch precision. Determine whether you will use an inside mount or an outside mount before measuring.
- Inside Mount: Measure the exact width of the window opening at three points (top, middle, bottom) and use the smallest measurement. Measure the exact height at three points (left, middle, right) and use the smallest measurement. A minimum depth of 1 3/4 inches is required, with 3 inches for a flush fit.
- Outside Mount: Measure the desired width and height to cover the entire window opening, including any trim. Add at least 1.5 inches to each side for optimal light gap coverage. A minimum of 1 1/2 inches of flat space above the window is required for mounting brackets.
Image: A diagram showing the critical measurements of width, height, and depth for both inside and outside mount installations.
2. Installation Steps
Follow the detailed step-by-step instructions included in your package. General steps include:
- Mark Bracket Locations: Using a pencil, mark where the mounting brackets will be installed based on your chosen mount type (inside or outside). Ensure marks are level.
- Install Brackets: Drill pilot holes and secure the mounting brackets using the provided screws and anchors.
- Attach Shade: Carefully attach the headrail of the shade to the installed brackets. Ensure it clicks securely into place.
- Test Operation: Gently raise and lower the shade to ensure smooth and proper functionality.
Image: Two SelectBlinds Classic Cordless Woven Wood Shades installed in a modern living area, demonstrating their aesthetic appeal and functionality.
Operating Instructions
Your cordless woven wood shade is designed for simple and safe operation:
- To Lower the Shade: Gently pull down on the bottom rail of the shade to the desired position.
- To Raise the Shade: Gently push up on the bottom rail of the shade. The shade will hold its position once released.
- Ensure even pressure is applied when raising or lowering to maintain smooth movement.
Maintenance
To keep your woven wood shades looking their best:
- Regular Cleaning: Dust the shades regularly with a soft cloth, feather duster, or a vacuum cleaner with a brush attachment on a low setting.
- Spot Cleaning: For minor spots, gently blot with a damp cloth. Avoid excessive moisture, which can damage natural wood materials.
- Avoid Harsh Chemicals: Do not use abrasive cleaners or strong chemical solutions, as these can discolor or damage the natural materials.
- Protect from Moisture: While suitable for various rooms, prolonged exposure to high humidity or direct water contact should be avoided to prevent warping or mildew.
Image: A detailed close-up of the woven wood material, highlighting the natural variations and texture of the bamboo and reeds.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Shade does not raise or lower smoothly. | Obstruction in the mechanism or uneven pressure during operation. | Check for any foreign objects. Ensure you are applying even pressure to the center of the bottom rail when operating. |
| Shade is crooked. | Uneven installation or a slight shift in the material. | Ensure mounting brackets are level. Fully lower and then slowly raise the shade to allow the material to realign. |
| Shade does not stay in position. | Cordless mechanism requires adjustment or is faulty. | Contact SelectBlinds customer support for assistance. |
Specifications
| Brand: | SELECT BLINDS |
| Model Number: | 788 |
| Material: | Natural Bamboo, Reeds, Woods (Polyester fabric type mentioned in specs might refer to backing or thread, but primary material is natural wood/bamboo as per description) |
| Operation Mode: | Manual, Cordless |
| Color (as reviewed): | Primrose |
| Available Widths: | 20" to 72" |
| Available Heights: | 24" to 72" |
| Valance: | 6-inch matching valance included |
| Inside Mount Minimum Depth: | 1 3/4" (3" for flush mount) |
| Outside Mount Minimum Space: | 1 1/2" above window |
Warranty and Support
SelectBlinds products are designed for durability and performance. For specific warranty details, please refer to the documentation included with your purchase or visit the official SelectBlinds website.
If you require assistance with installation, operation, or troubleshooting, our expert support team is available to help. You can find contact information on the SelectBlinds website or through your purchase platform.
For more information, visit the official SelectBlinds Store.