VHBW 42V Charger

VHBW 42V Charger Instruction Manual

Compatible with Roinside Electric Scooters: UP2, UP6, UP6-1, UP8, U2, P1

Product Overview

The VHBW 42V Charger is designed to provide efficient and safe charging for your compatible Roinside electric scooter. This manual provides essential information for proper setup, operation, and maintenance.

VHBW 42V Charger with power cord and output cable

Image: The VHBW 42V charger unit, showing the main adapter block, the AC input power cord, and the DC output cable with its round connector.

Compatible Models

This charger is specifically designed for the following Roinside electric scooter models:

Roinside UP2 Electric Scooter
Roinside UP6 Electric Scooter
Roinside UP6-1 Electric Scooter
Roinside UP8 Electric Scooter
Roinside U2 Electric Scooter
Roinside P1 Electric Scooter

List of compatible Roinside scooter models

Image: A visual representation listing the compatible Roinside electric scooter models for this charger.

Safety Information

Please read and understand all safety instructions before using the charger. Failure to follow these instructions may result in electric shock, fire, or serious injury.

Use the charger only with compatible devices as listed.
Do not expose the charger to water, rain, or excessive moisture.
Avoid dropping or subjecting the charger to strong impacts.
Do not disassemble or modify the charger.
Ensure proper ventilation during charging to prevent overheating.
Unplug the charger from the power outlet when not in use.
Keep out of reach of children.
If the charger or cable is damaged, discontinue use immediately and replace it.

VHBW charger with icons for ETL, FCC, IC Control, and Multiple Protection

Image: The charger highlighting its built-in multiple protection features and safety certifications like ETL and FCC.

Setup and Connection

Verify Compatibility: Ensure your scooter model is listed under "Compatible Models" and that its charging port matches the charger's round connector.
Connect to Scooter: Insert the round DC output connector of the charger firmly into the charging port of your Roinside electric scooter.
Connect to Power: Plug the AC power cord into the charger unit, then plug the other end of the AC power cord into a standard wall outlet (100-240V AC).
Charging Indicator: The LED indicator on the charger will illuminate to show the charging status.

Person connecting charger to a Roinside scooter, showing the 9.8 ft long cord

Image: A visual guide demonstrating how to connect the charger to a scooter, emphasizing the charger's 9.8 ft cord length.

Comparison of correct 42V round connector versus incorrect DC barrel connector

Image: A close-up showing the correct round 42V connector type for the scooter, contrasting it with an incompatible connector.

Operating Instructions

Charging Process

Once connected, the charger will automatically begin charging your scooter's battery.
The LED indicator provides visual feedback on the charging status.

LED Indicator Status

Red Light: Indicates the battery is currently charging.
Green Light: Indicates the battery is fully charged.

When the green light appears, the charging process is complete. Disconnect the charger from the scooter and the power outlet.

VHBW charger showing LED indicator status: Red for Charging, Green for Full of Electricity

Image: The charger's LED indicator, illustrating that a red light means charging and a green light means fully charged.

Maintenance

Cleaning: Wipe the charger with a dry, soft cloth. Do not use liquid cleaners or solvents.
Storage: Store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
Cable Care: Avoid bending or crimping the cables excessively. Do not wrap the cables too tightly around the charger.
Inspection: Periodically inspect the charger and cables for any signs of damage, such as frayed wires or cracked casing.

Troubleshooting

Problem	Possible Cause	Solution
Charger LED does not light up.	No power from outlet. Charger not properly connected. Charger or cable is damaged.	Check the wall outlet with another device. Ensure all connections are secure. Inspect charger and cables for damage; replace if necessary.
Charger LED remains red (charging) for an extended period.	Battery deeply discharged. Battery fault.	Allow more time for charging. If issue persists, consult scooter manufacturer for battery inspection.
Charger feels excessively hot.	Poor ventilation. Internal fault.	Ensure charger is in a well-ventilated area. Disconnect immediately and contact support if overheating continues.

Specifications

Brand	VHBW
Input Voltage	100-240 Volts (AC)
Output Voltage	42 Volts (DC)
Connector Type	Round Connector
Compatible Devices	Roinside UP2, UP6, UP6-1, UP8, U2, P1 Electric Scooters
Product Dimensions	3 x 0.5 x 5 inches (approximate for main unit)
Item Weight	0.704 ounces (approximate)
Power Source	Corded Electric
Color	Black

Customer Support

For further assistance or inquiries, please refer to the VHBW official website or contact your retailer.

Related Documents - 42V Charger

	vhbw Activated Carbon Filter for Extractor Hoods - Model BW889002816 Detailed information about the vhbw Activated Carbon Filter (Model BW889002816), compatible with Ikea extractor hoods (e.g., models 903.046.29, 903.046.10). Includes product specifications, safety instructions, and disposal guidelines.
	vhbw Battery Compartment Cover for Digital Camera - Model BW800109153 Official product information, specifications, safety guidelines, and disposal instructions for the vhbw battery compartment cover (Model BW800109153) by B & W Handelsgesellschaft mbH. Replacement part for digital cameras.
	B&W vhbw 2x Cleaning Cloth Pad Hoover Replacement - Model BW889005066 Official information and safety guidelines for the vhbw 2x Cleaning Cloth Pad Hoover replacement pads (Model BW889005066) from B&W Handelsgesellschaft mbH. Includes product details, usage, safety, and disposal instructions.
	vhbw Lint Sieve Filter for Whirlpool Washing Machines - Model BW888401538 This document provides information and safety instructions for the vhbw Lint Sieve Filter, model BW888401538, a replacement part for Whirlpool washing machines compatible with part number 481248058403. It includes product specifications, safety guidelines, and disposal information.
	B&W vhbw 6-Piece Vacuum Robot Filter Set - Model BW889005060 Product information and safety guidelines for the vhbw replacement filter set for vacuum robots, model BW889005060.
	vhbw Activated Carbon Filter for Extractor Hoods - Model BW889001897 Replacement activated carbon filter by vhbw for extractor hoods, model BW889001897. Features include dimensions 180x180x37 mm, weight 268g, and material activated carbon/plastic. Includes important safety and disposal information.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.