iOOiQQ IOP32QGTV.IOP43QA11.IOP43QA11

iOOiQQ Replacement Remote Control Instruction Manual

Model: IOP32QGTV.IOP43QA11.IOP43QA11

1. Introduction

This manual provides instructions for the iOOiQQ infrared replacement remote control. This remote is designed to operate specific PEAQ Smart TV models. It functions as a direct replacement and does not require programming or setup. Please note that this remote control does not support voice functions or Google Voice Assistant.

2. Package Contents

  • 1 x iOOiQQ Replacement Remote Control
  • Note: AAA batteries are not included and must be purchased separately.

3. Setup

3.1. Installing Batteries

  1. Locate the battery compartment on the back of the remote control.
  2. Slide the battery compartment cover downwards to open it.
  3. Insert two (2) AAA alkaline batteries, ensuring the positive (+) and negative (-) terminals match the diagrams inside the compartment.
  4. Close the battery compartment cover by sliding it back into place until it clicks.
Back view of the iOOiQQ remote control showing the battery compartment.

Figure 1: Back of the remote control with battery compartment.

3.2. Compatibility

This remote control is compatible with the following PEAQ Smart TV models:

  • IOP32QGTV
  • IOP43QA11
  • PTV 50GU-5024C
  • PTV 55GMU-5024C
  • PTV 65GQU-5124C

No programming or configuration is required. Simply insert the batteries, and the remote is ready for use with compatible models.

4. Operating Instructions

Point the remote control directly at the infrared receiver on your PEAQ Smart TV. Ensure there are no obstructions between the remote and the TV.

Front view of the iOOiQQ remote control showing all buttons.

Figure 2: Front view of the remote control with button layout.

4.1. Button Functions Overview

ButtonFunction
Power ()Turns the TV on or off.
Number Buttons (0-9)Direct channel selection.
LANG.Changes audio language or subtitle options.
Home ()Accesses the TV's home screen or smart features.
Volume (+ / -)Adjusts the volume level.
Mute (🔇)Mutes or unmutes the TV sound.
Channel (P / )Changes the TV channel up or down.
Navigation Arrows ( )Navigates through menus and options.
OKConfirms selections.
EXITExits current menu or application.
NET / YTB / Google Play / Prime Video / MENUDirect access buttons for specific applications or the TV menu.
Media Control Buttons (Rewind, Play/Pause, Fast Forward, Stop)Controls media playback.
TEXTAccesses teletext or other text-based services.
Colored Buttons (Red, Green, Yellow, Blue)Functions vary depending on the TV menu or application.

5. Maintenance

5.1. Cleaning the Remote Control

To clean the remote control, gently wipe it with a soft, dry cloth. Do not use liquid cleaners, sprays, or abrasive materials, as these can damage the remote's surface or internal components.

5.2. Battery Replacement

Replace the batteries when the remote control's response becomes sluggish or stops working. Always replace both batteries at the same time with new AAA alkaline batteries. Do not mix old and new batteries, or different types of batteries.

6. Troubleshooting

6.1. Remote Control Not Responding

  • Check Batteries: Ensure batteries are inserted correctly with the correct polarity (+/-). Replace with fresh AAA alkaline batteries if necessary.
  • Line of Sight: Make sure there are no objects blocking the path between the remote control and the TV's infrared sensor.
  • Distance: Ensure you are within the effective operating range of the TV's infrared receiver.
  • TV Compatibility: Verify that your TV model is listed as compatible with this remote control.

6.2. Specific Buttons Not Working

  • Battery Check: Weak batteries can sometimes cause intermittent button functionality. Replace batteries.
  • Infrared Interference: Other electronic devices emitting infrared signals might interfere. Try using the remote in a different environment.
  • Physical Damage: Inspect the button for any physical damage or debris that might be preventing it from pressing correctly.

7. Specifications

BrandiOOiQQ
Model NumberIOP32QGTV.IOP43QA11.IOP43QA11
Compatible DevicesPEAQ Smart TVs (IOP32QGTV, IOP43QA11, PTV 50GU-5024C, PTV 55GMU-5024C, PTV 65GQU-5124C)
Connectivity TechnologyInfrared (IR)
Battery Type2 x AAA Alkaline Batteries (not included)
Product Dimensions4.2 x 1.8 x 21.5 cm (1.65 x 0.71 x 8.46 inches)
Item Weight70 grams (2.47 ounces)

8. Support

For any issues or inquiries regarding this product, please contact our customer service. We aim to provide a satisfactory response within 24 hours.

Contact information is typically available through your purchase platform or the product packaging.

© 2025 iOOiQQ. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.