Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GENERIC SLYDOOR Lock, model NBN818. Designed for main doors, dining hall doors, bedroom doors, and house gate doors, this lock offers enhanced safety and security. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your lock.
The SLYDOOR Lock is crafted to blend seamlessly with modern interiors and exteriors, enhancing the aesthetic appeal of its surroundings. Each unit undergoes rigorous quality control to ensure consistent production standards.
Product Features
- Suitable for Office doors, cabin doors, and Aluminum profile doors.
- Durable construction for enhanced security.
- Designed for modern aesthetic integration.
Included Components
The package for the SLYDOOR Lock SDER=7800688 includes the following items:
- Bolts
- Lock body (main unit)
- Staple plate
- Mounting screws
Figure 1: Overview of SLYDOOR Lock components, showing two lock bodies and the accompanying mounting screws.
Setup and Installation
Follow these steps for proper installation of your SLYDOOR Lock:
- Prepare the Surface: Ensure the door and frame surfaces where the lock will be installed are clean, dry, and flat.
- Position the Lock Body: Place the main lock body (the longer part with the hinged plate) on the door surface where you intend to secure it. Mark the screw holes with a pencil.
- Attach the Lock Body: Using the provided screws, securely fasten the lock body to the door. Ensure it is aligned straight.
- Position the Staple Plate: Close the door and align the staple plate (the smaller part with the loop) with the loop on the lock body. Mark the screw holes on the door frame.
- Attach the Staple Plate: Securely fasten the staple plate to the door frame using the remaining screws. Ensure the loop aligns perfectly with the hinged plate of the lock body when the door is closed.
- Test Functionality: Close the door and engage the lock. Ensure the hinged plate slides smoothly over the staple plate's loop, allowing a padlock (not included) to be inserted.
Figure 2: Disassembled view of the SLYDOOR Lock, illustrating the separate lock body and staple plate components before installation.
Figure 3: Assembled view of the SLYDOOR Lock, demonstrating how the hinged plate engages with the staple for secure locking.
Operating Instructions
The SLYDOOR Lock is designed for simple and effective operation:
- To Lock: Close the door completely. Slide the hinged plate of the lock body over the loop of the staple plate. Insert a padlock (not included) through the aligned holes of the hinged plate and the staple loop. Close the padlock to secure.
- To Unlock: Open the padlock and remove it from the lock. Slide the hinged plate back to disengage it from the staple loop. The door can now be opened.
Note: A padlock is required for securing the SLYDOOR Lock and is not supplied with this product.
Maintenance
To ensure the longevity and smooth operation of your SLYDOOR Lock, follow these maintenance guidelines:
- Cleaning: Wipe the lock periodically with a soft, damp cloth to remove dust and grime. Avoid using abrasive cleaners or solvents, as these can damage the finish.
- Lubrication: If the hinged plate becomes stiff, apply a small amount of silicone-based lubricant to the hinge points. Do not use oil-based lubricants, as they can attract dust.
- Inspection: Regularly inspect the lock and mounting screws for any signs of loosening or damage. Tighten screws as needed.
- Corrosion Prevention: For locks installed in humid or outdoor environments, consider applying a thin layer of rust-inhibiting spray to metal surfaces periodically.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Lock is stiff or difficult to operate. | Accumulation of dirt or lack of lubrication. | Clean the lock thoroughly and apply a silicone-based lubricant to the hinge. |
| Lock does not align properly. | Improper installation or shifting of door/frame. | Re-check alignment of lock body and staple plate. Adjust screw positions if necessary. Ensure door and frame are stable. |
| Screws are loose. | Vibration or regular use. | Tighten all mounting screws. If screws continue to loosen, consider using longer screws or wall anchors suitable for your door material. |
Specifications
| Attribute | Detail |
|---|---|
| Brand | GENERIC |
| Model Number | NBN818 (SDER=7800688) |
| Manufacturer | NEW STAR WORLD TRADERS MYSURU |
| Included Components | Bolts (Lock body, Staple plate, Mounting screws) |
| Color | SILVER |
| ASIN | B0F9WF2CX9 |
Warranty and Support
Information regarding specific warranty terms for the SLYDOOR Lock SDER=7800688 is not provided in the product details. For warranty claims or technical support, please contact the manufacturer, NEW STAR WORLD TRADERS MYSURU, directly or refer to the seller's return policy on the platform where the product was purchased.
For general inquiries or assistance with installation, you may also refer to online resources or consult a professional locksmith.