amiciSmart AS-1xCLR-MUL-PRO-1P-N WiFi Bi-Directional Energy Meter User Manual

1. Introduction

The amiciSmart AS-1xCLR-MUL-PRO-1P-N is a WiFi Bi-Directional Energy Meter designed for single-phase 220VAC systems, supporting up to 80A. This device integrates electrical protection and power monitoring capabilities, offering features such as adjustable over/under voltage, over/under current, and leakage protection. It also includes a timer switch and auto-reconnect functionality, ensuring the safety and efficient management of your electrical equipment. The meter provides real-time monitoring of electrical parameters via its LCD display and the SmartLife App.

2. Safety Information

• Installation and maintenance should only be performed by qualified electricians.
• Ensure the main power supply is disconnected before installation or wiring to prevent electric shock.
• Verify all wiring connections are secure and correct according to the provided diagrams.
• Do not operate the device in wet or damp conditions.
• Adhere to local electrical codes and regulations during installation.
• When monitoring bi-directional power, disable the leakage protection feature to ensure accurate measurements.

3. Package Contents

The package includes:

• 1 x amiciSmart WiFi Smart Energy Meter

4. Product Overview

The amiciSmart Energy Meter features a clear LCD display for real-time data, control buttons, and indicators for various functions. It is designed for universal DIN 35mm rail installation.

Figure 4.1: Front view of the amiciSmart WiFi Bi-Directional Energy Meter. The LCD displays real-time voltage, current, power, and energy readings, with buttons for settings and navigation.

Figure 4.2: Key features of the energy meter, including its large LCD display for real-time data, 35mm DIN rail installation compatibility, and multifunctional design for timing and electricity measurement.

5. Setup

5.1. Physical Installation

1. Power Disconnection: Before starting, ensure the main power supply to the circuit where the meter will be installed is completely disconnected.
2. Mounting: Mount the amiciSmart Energy Meter onto a standard 35mm DIN rail. Ensure it is securely fastened.
3. Wiring: Connect the input and output wires according to the wiring diagram provided with the device. Pay close attention to the Live (L) and Neutral (N) connections for both input and output. The meter is designed for single-phase 220VAC systems.
4. Verification: Double-check all connections for tightness and correctness to prevent short circuits or improper operation.
5. Power Restoration: Once installation is complete and verified, restore the main power supply.

5.2. SmartLife App Connection

1. Download App: Download the "SmartLife" application from the Google Play Store or Apple App Store on your smartphone.
2. Register/Login: Open the SmartLife App and register for a new account or log in if you already have one.
3. Add Device: In the app, tap the "+" icon or "Add Device" to begin the pairing process.
4. Select Device Type: Follow the in-app instructions to select the correct device type (e.g., Electrical > Energy Meter).
5. Pairing Mode: Ensure the energy meter is in pairing mode (refer to the device's display or indicator for confirmation, usually a blinking WiFi icon). If not, press and hold the WiFi button on the meter until it enters pairing mode.
6. Connect to WiFi: Enter your 2.4GHz WiFi network credentials when prompted by the app. The meter does not support 5GHz WiFi networks.
7. Completion: Once connected, the device will appear in your SmartLife App, allowing you to monitor and control it remotely.

Figure 5.1: The SmartLife App interface demonstrating remote monitoring and control capabilities for the energy meter, including real-time energy consumption and cut-off reasons.

6. Operating Instructions

6.1. Real-Time Monitoring

• LCD Display: The meter's LCD displays real-time values for voltage, current, active power, reactive power, frequency, and total energy (kWh). Use the physical buttons on the device to cycle through different display modes.
• SmartLife App: Access the SmartLife App to view real-time and historical energy consumption data, voltage, and current readings. The app also provides details on the reason for any automatic cut-offs with timestamps.

6.2. Protection Features

The device offers comprehensive electrical protection:

• Over/Under Voltage Protection: Adjustable range (120V~300V for overvoltage, 80V~210V for undervoltage). The device will automatically cut off power if voltage exceeds or falls below the set limits.
• Over/Under Current Protection: Adjustable range (1~80A). Power is cut off if current exceeds the set limit.
• Leakage Protection: Adjustable range (10~100mA). The device will trip if a leakage current is detected. Note: Disable leakage protection when monitoring bi-directional power for accurate measurements.
• High Temperature Protection: Automatically disconnects power if the internal temperature exceeds safe operating limits.
• Delay Protection: Configurable delay settings for power restoration after a protection event.

6.3. Timer Switch

Utilize the SmartLife App to set timing schedules for the energy meter. This allows you to automatically turn power on or off at specific times, optimizing energy usage.

Figure 6.1: The timing schedule feature enables users to program specific on/off times for connected devices, promoting energy efficiency and convenience.

6.4. Auto Reconnect Functionality

The meter is equipped with an auto-reconnect feature. After a protection trigger (e.g., overvoltage), the device will automatically restore the power supply once the fault condition is resolved and any set delay period has passed. This minimizes disruption to your electrical system.

7. Maintenance

• Keep the device clean and free from dust. Use a dry, soft cloth for cleaning.
• Do not use abrasive cleaners or solvents.
• Regularly check wiring connections for any signs of loosening or damage.
• Ensure adequate ventilation around the device to prevent overheating.

8. Troubleshooting

• Device not powering on: Check the main power supply and all wiring connections. Ensure the input voltage is within the specified range.
• No WiFi connection: Ensure your router is broadcasting a 2.4GHz WiFi signal. Verify the WiFi password entered in the SmartLife App is correct. Move the meter closer to the router if signal strength is weak.
• Device trips frequently: Check the set thresholds for over/under voltage, current, and leakage protection. Adjust them if they are too sensitive for your load. Investigate the electrical circuit for actual faults.
• Inaccurate energy readings: Ensure the wiring is correct, especially for bi-directional measurement. If bi-directional measurement is active, ensure leakage protection is disabled as per safety instructions.
• App shows different readings than device: Ensure both the app and the device firmware are up to date. Check for any app updates.

9. Specifications

Figure 9.1: Physical dimensions and weight of the amiciSmart WiFi Bi-Directional Energy Meter.

10. Warranty

The amiciSmart AS-1xCLR-MUL-PRO-1P-N WiFi Bi-Directional Energy Meter comes with a 1-year warranty. To claim warranty service, please contact amicikart customer support.

11. Customer Support

For technical assistance, warranty claims, or any other inquiries, please contact:

• Company: Amicikart Online Services Pvt Ltd
• Contact Number: +91 980 970 9898
• Email: care@amicikart.com