User Manual: AC85~265V Smart Power Detector Monitor

1. Product Overview

The AC85~265V Smart Power Detector Monitor is a versatile device designed for measuring and monitoring various electrical parameters in household and industrial settings. It features a digital display, multiple operation keys, and advanced functions for power management and safety.

Figure 1: Front view of the Smart Power Detector Monitor, highlighting the digital display and integrated power outlets.

Key Features:

• Full digital operation and control for precise measurements.
• 2.4-inch true color TFT LCD display for clear data visualization.
• High accuracy with 1.0-level measuring precision.
• Intuitive control via three operation keys.
• Comprehensive 7-in-1 functional test windows display.
• Ability to measure electricity (KWH) and cumulative electricity bill (Cost).
• Programmable alarm and cut-off functions for voltage, current, and power thresholds.
• Supports APP connection modes for iOS, Android, and computer for remote monitoring and control.

2. Safety Information

Always read and understand all instructions before using this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not disassemble or modify the device.
• Ensure proper wiring connections to prevent electrical shock.
• Keep the device away from water and high humidity environments.
• Do not exceed the specified electrical parameters (voltage, current, power).
• Unplug the device from the power source before cleaning or maintenance.

3. Setup and Installation

This device supports two primary wiring methods for integration into your electrical system. Choose the method that best suits your application.

Figure 2: Wiring methods for the Smart Power Detector Monitor. Ensure proper insulation for unused wiring methods.

Wiring Method 1 (Direct Wire Connection):

1. Connect the N IN and L IN terminals to your AC power source (AC85~265V).
2. Connect the N OUT and L OUT terminals to the electrical equipment you wish to monitor.
3. Ensure all connections are secure and properly insulated.

Wiring Method 2 (Standard Power Inlet):

1. If using this method, ensure the direct wire terminals from Method 1 are properly sealed with electrical tape to prevent shock.
2. Plug a compatible power cord into the device's standard power inlet.
3. Connect the other end of the power cord to a suitable power outlet.

Important: If you do not use a specific wiring method, please seal the unused terminals with electrical tape to prevent electric shock.

Figure 3: Angled view of the device, illustrating its compact design and integrated outlets.

4. Operating Instructions

The device features a 2.4-inch TFT LCD display and three operation keys for navigation and settings.

Figure 4: Various display interfaces and settings menus of the Smart Power Detector Monitor.

4.1. Power On/Off

After power on, the device will retain its last working state. To turn the monitoring function OFF, use the appropriate key or menu option on the display.

4.2. Main Display Interface

The main interface displays 7-in-1 functional test windows, including:

• Voltage (Vol)
• Current (Cur)
• Power (Pwr)
• Energy (Ene - KWH)
• Frequency (Fre)
• Power Factor (Factor)
• Temperature (T(IN))

It also shows Price, Cost, and CO2 emissions, which can be configured.

4.3. Setting Electricity Price

To accurately calculate the cumulative electricity bill (Cost), you can set the electricity price according to your local rates. Refer to the "Background settings" or "Main test interface" section on the display (Figure 4) for navigation to the price setting option.

4.4. Alarm and Cut-Off Function

The device can be programmed to trigger an alarm and/or cut off power if voltage, current, or power values exceed user-defined thresholds. Navigate to the "Security protect interface" (Figure 4) to configure these settings:

• OVP: Over Voltage Protection
• OCP: Over Current Protection
• OPP: Over Power Protection

4.5. APP Connection (iOS, Android, Computer)

The device supports connection via dedicated applications on iOS, Android, and computer platforms. Consult the specific APP instructions for pairing and remote monitoring functionalities. This allows for advanced data logging, analysis, and control.

4.6. Timing Functions

The device includes various timing functions such as "Timming_CountDown", "Smart_PowerOff", "Timming_Powersupply", and "Timming_Cycle". These functions allow for scheduled power on/off or monitoring periods. Refer to the respective interfaces shown in Figure 4 for configuration details.

5. Maintenance and Care

• Clean the device regularly with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ensure the device is unplugged before cleaning.
• Avoid exposing the device to extreme temperatures or direct sunlight.
• Store the device in a cool, dry place when not in use for extended periods.

6. Troubleshooting

7. Specifications

8. Warranty and Support

For warranty information and technical support, please contact the manufacturer or your point of purchase. Keep your purchase receipt as proof of purchase.

Manufacturer: YANPUDIANZISHANGWU

Brand: Generic

For further assistance, please visit the official product support page or contact customer service.