Mia&Coco Electric Blanket King - 90"x100" User Manual

Introduction

Welcome to your new Mia&Coco Electric Blanket. This manual provides essential information for safe and effective use of your King size heated blanket. Please read all instructions carefully before use and retain for future reference.

Important Safety Information

• Read all instructions before using the electric blanket.
• Do not use with infants, children, incapacitated persons, or anyone insensitive to heat.
• Ensure the blanket is not folded, bunched, or creased during operation to prevent overheating.
• Do not use pins or other metallic objects with the blanket.
• Always detach the controller(s) and power cord before washing.
• Keep controllers and cords away from water during washing.
• This blanket features overheat protection for your safety.
• Do not dry clean.
• Do not iron.
• Do not bleach.

Package Contents

• 1 x Mia&Coco Electric Blanket King (90"x100")
• 2 x Dual Controllers with Power Cords
• 1 x User Manual

Setup

1. Unpack the electric blanket and lay it flat on your mattress.
2. Locate the connection ports on the blanket. For King size, there are two ports for dual control.
3. Connect each controller's cord securely to its respective port on the blanket. Ensure a firm connection.
4. Plug the power cords from the controllers into a standard electrical outlet. Ensure the outlet is easily accessible.

Note: The sturdy 263cm (103.5 inch) cable allows for flexible placement of the controllers.

Figure 1: Mia&Coco Electric Blanket with Dual Controls.

Figure 2: Intelligent Dual-Wire System for Fast and Even Heating.

Operating Instructions

Controller Overview

Figure 3: Intuitive and User-Friendly Controller.

1. Power On/Off: Press the power button (circle icon) to turn the blanket on or off. The LED display will illuminate.
2. Adjusting Heat Levels: Use the '+' and '-' buttons to select your desired heat level. There are 10 adjustable temperature levels (1-9 and H, ranging from 77-127°F). The red digits indicate the current heat level.
3. Setting the Timer: Press the 'HEAT TIMER' button to cycle through the available timer settings (1 to 10 hours). The green digits indicate the set timer. The blanket has a 3-hour default auto-off feature and a 10-hour programmable timer for safety and energy saving.
4. Pre-Heat Function: Press the 'PRE-HEAT' button for a rapid warm-up. This function sets the blanket to the highest heat level and automatically returns to the original setting after 1 hour.
5. Dual Control: Your King size blanket comes with two independent controllers, allowing each user to set their preferred heat and timer settings for their side of the bed.

Video 1: Mia&Coco King Size Heated Blanket Overview.

Maintenance

Care and Cleaning

The Mia&Coco Electric Blanket is designed for easy care.

1. Disconnect: Before washing, always ensure both controllers and power cords are completely detached from the blanket.
2. Machine Wash: The blanket can be machine washed. Use a gentle cycle with cold water (below 86°F / 30°C). Do not use bleach.
3. Hand Wash: Alternatively, the blanket can be hand washed in cold water (below 86°F / 30°C).
4. Drying: Tumble dry on low heat or line dry. Ensure the blanket is completely dry before reattaching controllers or storing. Do not iron or dry clean.
5. Storage: Store the blanket in a cool, dry place. Avoid folding tightly or placing heavy objects on it to prevent damage to the internal wiring.

Figure 4: Detach Cords Before Washing.

Troubleshooting

• Blanket not heating: Ensure all cords are securely connected to both the blanket and the power outlet. Check if the power outlet is functional.
• Controller display not working: Verify the power connection. If the issue persists, contact customer support.
• Uneven heating: Ensure the blanket is spread flat and not bunched up.

Product Specifications

Warranty and Support

For any questions, concerns, or warranty claims, please contact Mia&Coco customer support through the retailer's platform or visit the official Mia&Coco website.

Please refer to your purchase documentation for specific warranty details.