JES Japan Electric Drive Recorder

Introduction

Thank you for purchasing the JES Japan Electric Drive Recorder DRC-32ST + 32MPR1 Set. This manual provides essential information for the correct and safe use of your drive recorder, including setup, operation, maintenance, and troubleshooting.

To ensure correct and safe use, please read this instruction manual thoroughly before use. Always install this unit securely according to the included instructions.

This unit is not waterproof. Please use it in a location where it will not be exposed to rain, seawater, or similar liquids.

Product Overview

The DRC-32ST is a multi-recording compatible drive recorder capable of simultaneous Full HD recording of both the front and rear of your vehicle. It features built-in GPS and an Orbis point guidance function.

Image: The product box and its contents, including the main drive recorder unit, rear camera, power unit, and various cables and accessories.

Components:

• DRC-32ST Main Unit (Front Camera)
• Rear Camera
• 32MPR1 Power Unit
• Power Wiring (connected to main unit)
• Connection Cable for Drive Recorder
• Switch
• Double-sided Tape
• Electro-taps (x3)
• Instruction Manual (this document)

Image: Close-up view of the DRC-32ST main unit (front camera) and the separate rear camera, both in their protective packaging.

Setup and Installation

Proper installation is crucial for the performance and safety of your drive recorder. Ensure the installation complies with safety standards and does not obstruct driving or vehicle safety devices.

1. MicroSD Card Insertion:

This product requires a microSDHC memory card to operate. It cannot be used without a memory card. Insert the microSDHC card into the designated slot on the main unit before use.

2. Main Unit (Front Camera) Installation:

Install the main unit on the front windshield, ensuring it has a clear view of the road ahead and does not obstruct the driver's view. Use the provided double-sided tape for secure mounting.

Image: The DRC-32ST main unit mounted on the front windshield of a vehicle, positioned to capture the road ahead.

3. Rear Camera Installation:

Install the rear camera on the rear window, ensuring it has a clear view of the road behind. Connect it to the main unit using the provided cable.

Image: The rear camera mounted on the rear window of a vehicle, positioned to record the view behind the car.

4. Power Unit (32MPR1) and Wiring:

Connect the 32MPR1 power unit to your vehicle's power supply using the provided power wiring and electro-taps. Ensure all connections are secure and correctly wired according to your vehicle's electrical system. Avoid installing near antennas for terrestrial digital broadcasting, radio, or GPS, as it may cause reception interference.

Operating Instructions

The DRC-32ST is designed for continuous recording. Once powered on, it will automatically begin recording.

1. Basic Recording:

The device records in Full HD (1080p) for both front and rear cameras simultaneously. Recording is continuous, overwriting older files when the memory card is full.

2. GPS Function:

The built-in GPS module records location and speed data, which can be viewed during playback using compatible software.

3. Orbis Point Guidance Function:

This function provides guidance to the location of Orbis points (speed camera locations). Please note that this function does not indicate the presence or absence of enforcement and is for informational purposes only. The manufacturer is not responsible for any speeding violations.

Image: The product box front, illustrating key features such as multi-recording, Full HD, GPS, 2-channel recording, and Orbis point guidance.

Important Operating Notes:

• Do not stare at the product screen while driving. If you need to operate it, stop the vehicle in a safe place first.
• Images recorded by this product do not guarantee evidence for accidents or other incidents.
• Continuous recording repeats, but it does not guarantee recording in all situations. There may be cases where data cannot be saved.
• Lane departure warning and forward collision warning are auxiliary functions based on captured images for enjoyment, not for assisting safe driving. Malfunctions or non-operation may occur depending on road conditions, weather, driving conditions, or installation status. The manufacturer is not responsible for any accidents, injuries, or fatalities, regardless of whether these functions operate or not.

Maintenance

MicroSD Card Replacement:

Due to the nature of microSDHC cards, there is a limit to the number of times data can be written. It is recommended to replace the microSDHC card with a new one approximately every year to ensure optimal performance and data integrity.

General Cleaning:

Wipe the device and lenses with a soft, dry cloth. Do not use abrasive cleaners or solvents.

Troubleshooting

• Device not powering on: Ensure the power unit is correctly connected to the vehicle's power supply and the ignition is on. Check all wiring connections.
• No recording: Verify that a microSDHC card is inserted correctly. The device cannot operate without one. Check if the card is full or corrupted; try formatting or replacing the card.
• Poor GPS reception: Ensure the device is not installed near other antennas (terrestrial digital broadcasting, radio) that might cause interference. Relocate the device if necessary.
• Image quality issues: Clean the camera lenses. Ensure the protective film has been removed from the lenses.
• Malfunctions of warning functions (Lane Departure, Forward Collision): These are auxiliary functions and may not operate correctly depending on road conditions, weather, driving conditions, or installation status. They are not designed to assist safe driving.

For any issues not covered here, please refer to the detailed troubleshooting section in the full instruction manual or contact customer support.

Specifications

Image: Detailed product specifications table for the DRC-32ST, outlining technical data for both front and rear cameras, and general system features.

Warranty and Support

Warranty Information:

The warranty for this product applies only to the main unit and is valid for 3 years from the date of purchase. microSDHC cards and other accessories are not covered by the warranty.

If this product is used for commercial purposes (buses, trucks, taxis, commercial vehicles, etc.), it will not be covered by the warranty.

We are not responsible for any damage caused by malfunction or usage conditions of this product, or for data corruption on the microSDHC card.

Customer Support:

For inquiries and support, please contact:

JES Japan Electric Service Co., Ltd.

INB Marketing Division

Hirai 31-3, Hinode-machi, Nishitama-gun, Tokyo 190-0182, Japan

Website: http://www.je-s.co.jp

Product specifications and appearance are subject to change without notice for improvement. Please be aware.