CAROMIO SQB-TBD

CAROMIO Heated Electric Blanket Twin Size

Model: SQB-TBD

Introduction

This instruction manual provides important information for the safe and efficient use of your CAROMIO Heated Electric Blanket, Twin Size. Please read all instructions carefully before use and retain this manual for future reference.

CAROMIO Heated Electric Blanket, Twin Size, Cow Print

Image: The CAROMIO Heated Electric Blanket in cow print design, draped over a bed.

Important Safety Instructions

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following:

  1. Read all instructions before using this blanket.
  2. Do not use this blanket with an infant, a child, an invalid, or any person insensitive to heat.
  3. Do not use this blanket on an adjustable bed unless the blanket is designed for such use.
  4. Do not use this blanket if the power cord or plug is damaged.
  5. Do not use pins or other metallic objects with this blanket. They may damage the wiring.
  6. Do not use this blanket with alcohol or sedatives, as this may increase heat sensitivity.
  7. Ensure the controller is always placed in a position where it will not be covered by the blanket or other bedding.
  8. This blanket is equipped with intelligent NTC&PTC heating wires that continuously monitor and regulate temperature in real-time to prevent overheating. The product is ETL certified for safety.
Overheat protection diagram for CAROMIO electric blanket

Image: Diagram illustrating the overheat protection and faster warm-up features of the CAROMIO electric blanket compared to others.

Layers of CAROMIO electric blanket with PTC/NTC heating wires

Image: Cross-section view showing the layers of the electric blanket, highlighting the 220 GSM milk velvet, double layer non-woven fabric, PTC/NTC heating wires, and 210 GSM sherpa, emphasizing upgraded safety features.

Setup Instructions

  1. Unpack: Carefully remove the electric blanket from its packaging.
  2. Inspect: Check the blanket, power cord, and controller for any signs of damage. Do not use if damaged.
  3. Position: Lay the blanket flat on your bed or desired surface. Ensure the controller cord can reach a power outlet without being stretched or pinched.
  4. Connect: Plug the blanket's connector into the controller. Ensure a secure connection.
  5. Power On: Plug the power cord into a standard 120V AC electrical outlet.

Operating Instructions

Your CAROMIO electric blanket features an LCD controller for easy temperature and timer adjustments.

LCD controller for CAROMIO electric blanket

Image: Close-up of the LCD controller, showing buttons for temperature adjustment (Temp +/-, Power), and timer settings (Timer +/-). The display shows "9" for heat level.

Controller Functions:

Usage Recommendations:

CAROMIO electric blanket used for working, sofa, and bed

Image: The electric blanket shown in three different usage scenarios: draped over a chair for working, on a sofa, and on a bed, illustrating its versatility.

Care and Maintenance

Proper care ensures the longevity and performance of your electric blanket.

Washing Instructions:

  1. Disconnect: Always unplug the power connection from the wall outlet and detach the controller from the blanket before washing.
  2. Machine Wash: Machine wash the blanket in cold water on a gentle cycle.
  3. Drying: Tumble dry on low heat. Do not bleach or iron the blanket.
  4. Reshape: After washing and drying, gently stretch the blanket back to its original size for optimal performance.
  5. Storage: Store the blanket in a cool, dry place when not in use.
Woman placing CAROMIO electric blanket into washing machine

Image: A woman placing the cow print electric blanket into a washing machine, demonstrating the machine washable feature. An inset shows the detached power cord.

Troubleshooting

If you experience issues with your electric blanket, please refer to the following common problems and solutions:

ProblemPossible CauseSolution
Blanket does not heat.Not plugged in, controller not connected, power outage, or internal safety shut-off.Ensure power cord is securely plugged into a working outlet. Verify controller is firmly connected to the blanket. Check household circuit breaker. Unplug and re-plug the blanket to reset.
Controller display is off or flashing.Loose connection or internal error.Check all connections. Unplug the blanket from the wall outlet for 5 minutes, then plug it back in to reset the controller.
Blanket heats unevenly.Blanket is bunched or folded, or internal wiring issue.Ensure the blanket is spread flat without folds or bunches. If the problem persists, discontinue use.
Blanket is too hot or not warm enough.Incorrect heat setting.Adjust the temperature setting using the "Temp +/-" buttons on the controller.

Specifications

FeatureDetail
BrandCAROMIO
Model NameSQB-TBD
SizeTwin (62"L x 84"W)
ColorCow-brown
MaterialMilk Velvet (220GSM) and Sherpa (210GSM)
Heat Settings10 Levels (84°F - 115°F)
Auto-Off Timer1-12 Hours
Safety FeaturesETL Certified, NTC&PTC Heating Wires, Overheat Protection
Control Cord Length10.3 FT
Power Cord Length6 FT
Product Weight5.77 pounds
Care InstructionsMachine Washable (remove controller)
UPC199414225908
Size chart and cord lengths for CAROMIO electric blankets

Image: A table showing different blanket sizes (Throw, Twin, Full, Queen, King) with their corresponding control cord and power cord lengths. The Twin size is highlighted with 62"x84" dimensions, 10.3 FT control cord, and 6 FT power cord.

Warranty and Support

Specific warranty details and direct support contact information were not provided in the product data. For warranty claims or technical assistance, please refer to the product packaging or contact CAROMIO customer service through their official channels or the retailer where the product was purchased.