Dryhsip 8-in-1 Hair Styler Set & Hair Dryer Brush Instruction Manual

Introduction

This manual provides detailed instructions for the safe and effective use of your Dryhsip 8-in-1 Hair Styler Set. This versatile styling tool combines a high-speed hair dryer with multiple interchangeable attachments to achieve various hairstyles, including curling, volumizing, and straightening.

Important Safety Information

Please read all instructions before using this appliance. Keep this manual for future reference.

• Do not use this appliance near water.
• Always unplug the appliance immediately after use.
• Do not place or store the appliance where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
• If the appliance falls into water, unplug it immediately. Do not reach into the water.
• Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
• Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer.
• Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped or damaged, or dropped into water.
• Keep the cord away from heated surfaces. Do not wrap the cord around the appliance.
• Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair, and the like.
• Never use while sleeping.
• Never drop or insert any object into any opening.
• Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
• Do not use an extension cord with this appliance.
• Do not direct hot air towards eyes or other heat-sensitive areas.
• Attachments may be hot during use. Allow them to cool before handling.
• Always ensure the voltage indicated on the appliance corresponds to your local mains voltage.
• Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.

Package Contents

Your Dryhsip 8-in-1 Hair Styler Set includes the following components:

• Main Styler Unit (Hair Dryer Base)
• Collecting Nozzle
• Smoothing Comb
• Double-Sided Mirror Comb
• Inner Buckle Combs
• Curling Comb
• Left Automatic Hair Suction Wand
• Right Automatic Hair Suction Wand
• Heat-resistant Glove
• Hair Clips
• Cleaning Brush

Image: All components of the Dryhsip 8-in-1 Hair Styler Set, including the main unit, various brushes, curling wands, and accessories.

Product Overview and Controls

The main styler unit features a powerful 110,000 RPM high-speed motor and advanced airflow technology for fast drying and efficient styling. It is designed with user-friendly controls for temperature and airflow adjustment.

Main Unit Features:

• 90° Foldable Design: The main unit can rotate from a dryer to a styler with a simple twist, offering flexibility and portability.
• Negative Ionic Technology: Releases 200 million hydrating ions to reduce frizz, enhance luster, and leave hair smooth and shiny.
• AI Intelligent Auto Heat Control: Monitors heat 1000 times per second to prevent heat damage, maintaining a thermostatic temperature of 50°C.

Controls:

• On/Off Button: Powers the device on or off.
• Airflow Speed Settings: Three levels (Low, Medium, High) for customized drying and styling.
• Temperature Levels: Four settings (Ordinary temperature 26°C, Low temperature 60°C, Middle temperature 80°C, High temperature 105°C) for various hair types and styles.
• Cool Air Shot: One-key cool air setting to set your style.

Image: The main styler unit highlighting its foldable design and control panel with buttons for power, airflow speed, temperature, and cool shot.

Setup and Attachment Installation

To attach an accessory, align the accessory with the main unit and push it down until it clicks securely into place. To remove an accessory, press the lock button on the main unit and simultaneously pull the brush head upward. Always ensure the device is cool before changing attachments to prevent burns.

Image: Visual guide demonstrating the process of attaching and detaching styling heads from the main unit by pressing the lock button.

Operating Instructions

General Usage Tips:

• Ensure hair is 80-90% dry before using styling attachments for best results.
• Section hair into manageable parts.
• Always use the heat-resistant glove provided when handling hot attachments.
• For long-lasting curls, use the cool air shot function after styling each section.

Using the Hair Dryer (Main Unit with Collecting Nozzle):

Attach the Collecting Nozzle to the main unit. Use the high-speed airflow and desired temperature setting to quickly dry your hair. This is ideal for pre-drying before using other styling attachments.

Image: A woman using the Dryhsip hair dryer with the collecting nozzle to quickly dry her hair.

Styling with Automatic Hair Suction Wands (Curling):

The set includes two automatic hair suction wands: one for left-facing curls and one for right-facing curls. These wands utilize Coanda technology to automatically wrap hair around the barrel.

1. Ensure hair is 10-20% damp.
2. Select the appropriate curling wand (left or right) and attach it to the device.
3. Hold a section of hair near the wand. The air will automatically attract and wrap the hair around the barrel.
4. Hold for a few seconds until the curl is formed.
5. Use the cool shot to set the curl.
6. Gently release the hair.

Image: A woman demonstrating the use of the automatic hair suction wands to create curls.

Video: Official Dryhsip video demonstrating the 8-in-1 Hair Styler Set and Hair Dryer Brush, showcasing various attachments and styling capabilities.

Video: GloCurlX video demonstrating how to use the Auto Air-Wrap Curling Barrel for both left and right curls.

Volumizing and Straightening with Brushes:

The set includes various brushes like the Smoothing Comb, Double-Sided Mirror Comb, Inner Buckle Combs, and Curling Comb for different styling needs.

1. Attach the desired brush (e.g., Smoothing Comb for straightening, Curling Comb for volumizing).
2. Section your hair.
3. Glide the brush through your hair from roots to ends, applying gentle tension.
4. For added volume, lift hair at the roots while brushing.
5. The negative ionic technology will help reduce frizz and add shine.

Image: A woman using the smoothing comb attachment to achieve sleek, straight hair.

Video: MingShiDianzi video showcasing the Dual Voltage Hot Air Styler for fast drying and styling with various attachments.

Maintenance and Care

• Cleaning the Filter: Regularly clean the air inlet filter to prolong the hairdryer brush's life and maintain optimal performance. Refer to the diagram for filter location.
• Storage: Store the styler and its attachments in the provided carrying case in a cool, dry place.
• Cord Care: The power cord supports 360° rotation to avoid entanglement. Do not wrap the cord tightly around the appliance.

Image: Visual guide for safe usage tips, including the 90° foldable design, how to replace parts, cleaning the easy-to-clean filter, and the 360° swivel cord.

Troubleshooting

• Device Not Turning On: Ensure the power cord is securely plugged into a functional outlet. Check for any damage to the cord or plug. If the issue persists, contact customer support.
• Attachments Not Securing: Ensure the attachment is correctly aligned with the main unit and pushed firmly until it clicks into place.
• Hair Not Curling/Styling Effectively: Ensure hair is at the recommended dampness (10-20% for curling wands, 80-90% for brushes). Use appropriate heat and airflow settings for your hair type. For curling wands, ensure you are using the correct left/right barrel for the desired curl direction.
• Excessive Heat: If the device feels too hot, reduce the temperature setting. Always use the heat-resistant glove. The AI Intelligent Auto Heat Control is designed to prevent extreme heat, but individual sensitivity may vary.
• Frizziness: Ensure the negative ionic technology is active (indicated by a light, if present). Use the smoothing comb attachment for a sleek finish.

Note: For persistent issues, please refer to the warranty and support section.

Specifications

Warranty and Support

For warranty information or technical support, please refer to the product's packaging or visit the official Dryhsip website. Keep your purchase receipt as proof of purchase.

For additional assistance, you may contact Dryhsip customer service directly.

Online resources and FAQs may also be available on the Dryhsip brand store: Dryhsip Store