Generic Refrigerator Ice Container Replacement Part

1. Introduction

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the Generic WPW10312301 Refrigerator Ice Container Replacement Part. This part is designed to replace the original ice container in compatible Whirlpool refrigerator models. Please read this manual thoroughly before proceeding with installation or use to ensure proper function and safety.

2. Safety Information

• Always disconnect power to the refrigerator before attempting any installation, removal, or maintenance procedures. Failure to do so can result in electric shock or injury.
• Wear appropriate personal protective equipment, such as gloves, to protect against sharp edges or components.
• If you are unsure about any step, consult a qualified appliance technician.
• Keep small children and pets away from the work area during installation.

3. Package Contents

Verify that your package contains the following item:

• 1 x Generic WPW10312301 Refrigerator Ice Container Replacement Part

4. Compatible Refrigerator Models

This replacement ice container (Part Number WPW10312301) is compatible with various Whirlpool refrigerator models, including but not limited to:

• RS22AQXMQ00
• ED2JHGXRQ02
• ED22DQXAN00
• ED2PHEXMQ00
• ED2VHEXVQ00
• ED2FHEXMS00
• ED2KVEXVQ01
• ED22TQXGW00
• ED2FHEXST00
• ED2VHEXTQ01
• ED2GHEXNL03
• ED2CHQXVB00
• ED22GWXFW00

Please verify your refrigerator's model number before purchasing to ensure compatibility.

5. Setup and Installation

Follow these steps to replace your refrigerator's ice container:

1. Prepare for Installation: Ensure the refrigerator is unplugged from the power outlet to prevent electrical hazards.
2. Locate the Old Ice Container: Open the freezer door and identify the existing ice container. It is typically located beneath the ice maker assembly.
3. Remove the Old Ice Container: Carefully slide the old ice container out of its position. If it is full of ice, empty it first. Note how the container is seated and any mechanisms that hold it in place.
4. Inspect the New Container: Examine the new WPW10312301 ice container for any signs of damage from shipping.

This image displays the complete Generic WPW10312301 refrigerator ice container, a replacement part designed for various Whirlpool models. The container is white plastic with a metal ice-level arm visible on the side.

5. Install the New Ice Container: Carefully slide the new WPW10312301 ice container into the designated slot in the freezer. Ensure it is fully seated and aligned correctly with the ice maker chute and any guiding rails.

A detailed view of the internal mechanism of the WPW10312301 ice container, showing the white plastic components and the metal ice-level arm that signals the ice maker when the bin is full.

6. Restore Power: Once the new ice container is securely in place, plug the refrigerator back into the power outlet.
7. Test Operation: Allow several hours for the ice maker to produce ice and fill the new container. Verify that ice is being dispensed correctly.

6. Operating the Ice Container

The ice container works in conjunction with your refrigerator's automatic ice maker. Once installed, the ice maker will fill the container with ice. The metal arm on the side of the container acts as an ice-level sensor, stopping ice production when the container is full.

• To access ice, open the freezer door and pull out the ice container, or use the dispenser if your refrigerator model has one.
• Ensure the ice-level arm is free to move up and down. If it is obstructed by ice, the ice maker may not produce ice.

7. Maintenance

Regular cleaning of the ice container helps maintain hygiene and optimal ice quality.

• Cleaning: Periodically remove the ice container from the refrigerator. Empty any remaining ice. Wash the container with warm water and a mild dish soap. Rinse thoroughly to remove all soap residue.
• Drying: Allow the ice container to air dry completely before returning it to the freezer. This prevents ice from sticking to the container walls.
• Do not use abrasive cleaners or harsh chemicals, as these can damage the plastic.

8. Troubleshooting

If you encounter issues with your ice container or ice production, consider the following:

• No Ice Production:
  • Ensure the refrigerator is plugged in and receiving power.
  • Check that the ice maker's shut-off arm is in the down (ice-making) position.
  • Verify that the water supply to the refrigerator is turned on.
  • Confirm the ice container is fully seated in its correct position.
• Ice Overflowing:
  • Check if the ice-level arm on the container is obstructed by ice or debris, preventing it from rising to signal the ice maker to stop.
  • Ensure the ice maker itself is functioning correctly and not overfilling.
• Container Not Fitting Properly:
  • Double-check that your refrigerator model is listed as compatible.
  • Ensure the container is oriented correctly and not being forced into place.

If problems persist after checking these points, it may indicate an issue with the ice maker itself or another component of the refrigerator. Consult your refrigerator's user manual or a qualified technician.

9. Specifications

10. Warranty and Support

For specific warranty information regarding this replacement part, please refer to the terms provided by the seller at the time of purchase. If you require further assistance, have questions about installation, or need to report a defective product, please contact the seller or manufacturer directly through the platform where the purchase was made.