Pataku 2-Drawer Lateral File Cabinet with Lock

1. Introduction

Thank you for choosing the Pataku 2-Drawer Lateral File Cabinet. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new filing cabinet. Please read all instructions carefully before beginning assembly or use.

2. Important Safety Information

• Always ensure the cabinet is not overloaded beyond its 220 LBS capacity.
• Be cautious of fingers when opening and closing the drawers to prevent pinch point injuries.
• To prevent tipping, only open one drawer at a time. The interlock system is designed to enforce this safety measure.
• Wear gloves during installation to prevent injury from sharp edges.
• Ensure all screws are tightened securely during assembly.

3. Package Contents

Please verify that all components are present before beginning assembly.

• Cabinet Panels (Top, Bottom, Sides, Back, Drawer Fronts, Drawer Sides)
• 2 x Drawers
• Drawer Slides (Full-extension ball bearing slides)
• 1 x Lock with 2 Keys
• Hanging File Bars
• Assembly Hardware (Screws, Nuts, Corner Brackets, Wall Anchors)
• Screwdriver
• Gloves
• Instruction Manual

Figure 1: All components included in the package.

4. Assembly Instructions

Assembly is required for this product. For a visual guide, please refer to the assembly video provided below. It is recommended to have a second person assist with assembly.

Step-by-Step Guide:

1. Unpack and Identify Parts: Carefully unpack all components and lay them out on a clean, soft surface to prevent scratches. Identify each part using the provided parts diagram.
2. Assemble the Base Frame: Attach the bottom support bars to the side panels using the designated screws. Ensure they are securely fastened.
3. Attach Side and Back Panels: Connect the side panels to the bottom frame. Then, attach the back panel to the assembled sides and bottom. Use the provided screws and tighten them firmly.
4. Install Top Panel: Place the top panel onto the assembled frame, aligning the screw holes. Secure it with screws.
5. Assemble Drawers: Construct the drawer boxes by attaching the sides, front, and back panels. Insert the drawer bottom panels into the grooves.
6. Install Drawer Slides: Attach the inner part of the drawer slides to the sides of the drawer boxes. Attach the outer part of the drawer slides to the inside of the cabinet frame, ensuring correct alignment.
7. Insert Drawers: Carefully slide the assembled drawers into the cabinet frame, aligning the drawer slides. Ensure smooth operation.
8. Install Hanging File Bars: Insert the hanging file bars into the designated slots within each drawer. These are adjustable to accommodate Letter, Legal, A4, and F4 size files.
9. Install Lock: The lock mechanism is pre-installed on the top drawer. Ensure the keys are accessible.
10. Anti-Toppling Device (Optional but Recommended): For added safety, especially in homes with children or pets, secure the cabinet to a wall using the provided wall anchors and screws. Refer to the specific instructions for your wall type.

Figure 2: Tips for fast and easy assembly, including wearing gloves and watching the instruction video.

5. Operating Instructions

Drawer Operation:

• To open a drawer, gently pull the integrated handle. The smooth-rolling bearing slides ensure quiet and effortless operation.
• To close a drawer, push it firmly until it is fully seated within the cabinet.
• The anti-toppling design allows only one drawer to be opened at a time, preventing the cabinet from tipping forward.

Locking Mechanism:

• The high-security interlock system allows you to lock both drawers simultaneously with a single key.
• To lock: Ensure both drawers are fully closed. Insert the key into the lock on the top drawer and turn it to the locked position. Remove the key.
• To unlock: Insert the key into the lock and turn it to the unlocked position. The drawers can now be opened individually.

Figure 3: The interlock system provides high security, locking both drawers with one key.

6. Maintenance

• Cleaning: Wipe the cabinet surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that may damage the powder-coated finish.
• Drawer Slides: Periodically check the drawer slides for smooth operation. If they become stiff, a small amount of silicone lubricant can be applied.
• Hardware: Occasionally check all screws and fasteners to ensure they remain tight. Tighten if necessary.

7. Troubleshooting

Drawer is difficult to open/close:

• Check if the drawer is overloaded. Reduce the weight if it exceeds 220 LBS.
• Ensure the drawer slides are clean and free of obstructions.
• Verify that the drawer slides are properly aligned and securely fastened.

Lock is not working:

• Ensure both drawers are fully closed before attempting to lock the cabinet. The interlock system requires both drawers to be shut.
• Check if the key is fully inserted and turned correctly.

Cabinet feels unstable:

• Ensure the cabinet is placed on a flat, level surface.
• Verify that all assembly screws are tightened.
• If not already done, install the anti-toppling device to a wall as per assembly instructions.

8. Specifications

Figure 4: Detailed dimensions of the file cabinet.

9. Warranty and Support

Pataku is committed to providing high-quality products and excellent customer service. If you encounter any issues with your file cabinet or have questions regarding assembly, operation, or parts, please do not hesitate to contact us. Our customer service team is ready to assist you.

For support, please refer to the contact information provided with your purchase or visit the official Pataku store on Amazon.