1. Introduction
Thank you for choosing the CANMOV Manual Loveseat Recliner Sofa. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new furniture. Please read these instructions thoroughly before use and retain them for future reference.
Image 1.1: The CANMOV Manual Loveseat Recliner Sofa in brown.
2. Safety Instructions
- Weight Limit: Do not exceed the maximum weight capacity of 700 pounds for the entire loveseat.
- Children and Pets: Keep children and pets away from the reclining mechanism to prevent injury. Ensure they do not play on or under the furniture.
- Clearance: Ensure adequate clearance around the loveseat, especially behind and in front, when reclining. This is a wall-hugger design, but some space is still required.
- Stable Surface: Place the loveseat on a flat, stable surface to prevent tipping.
- Moving the Loveseat: When moving the loveseat, lift it rather than dragging to prevent damage to the frame or flooring.
- Assembly: Follow all assembly instructions carefully. Ensure all bolts and fasteners are securely tightened before use.
3. Package Contents
Your CANMOV Manual Loveseat Recliner Sofa is typically shipped in multiple boxes. Please verify that all components are present before beginning assembly. If any parts are missing or damaged, contact customer support immediately.
- Loveseat Backrests (2 sections)
- Loveseat Base (1 section)
- Armrests (2 sections)
- Hardware Pack (bolts, washers, Allen wrench)
- Instruction Manual
Image 3.1: Product dimensions: 54"W x 36"D x 41"H.
4. Setup and Assembly
Assembly is required for this loveseat. It is recommended that two people assemble the unit. All necessary tools are included.
Assembly Steps:
- Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
- Attach Backrests: Slide the backrest sections onto the metal posts located on the loveseat base. Ensure they click securely into place.
- Connect Armrests: Attach the armrests to the sides of the loveseat base, aligning the brackets and securing them with the provided bolts. Tighten all bolts firmly using the Allen wrench.
- Final Check: Once assembled, gently rock the loveseat to ensure all connections are stable and secure.
Image 4.1: Detail of the durable metal frame and reclining mechanism.
The loveseat features a durable metal and solid wood frame, rigorously tested for longevity.
5. Operating Instructions
The CANMOV Manual Loveseat Recliner Sofa offers independent reclining for each seat, allowing personalized comfort.
Reclining the Seat:
- Locate the Lever: On the side of each seat, locate the manual reclining lever.
- Engage Recline: Pull the lever firmly to release the footrest. Lean back gently to recline the backrest to your desired angle, between 90° and 150°.
- Return to Upright: To return to the upright position, push down on the footrest with your legs while leaning forward. The backrest will follow. Ensure the footrest locks into place.
Image 5.1: Each seat reclines independently from 90° to 150°.
Image 5.2: The manual lever for operating the recline function.
6. Maintenance and Care
Proper care will extend the life and appearance of your loveseat.
- Cleaning: Wipe clean with a dry cloth. For spills, blot immediately with a clean, dry cloth. Avoid harsh chemicals or abrasive cleaners.
- Material: The Leathaire material is designed to be air permeable, wear resistant, and water resistant. While water resistant, it is not waterproof; prolonged exposure to liquids should be avoided.
- Mechanism: Periodically check the reclining mechanism for any loose bolts and tighten if necessary. Avoid forcing the mechanism.
- Sunlight: Avoid placing the loveseat in direct sunlight for extended periods to prevent fading.
Image 6.1: Leathaire material features: anti-slip, water resistant, soft & skin-friendly.
7. Troubleshooting
If you encounter issues with your loveseat, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Reclining mechanism is stiff. | New mechanism, needs breaking in. | Use the mechanism repeatedly. It should loosen with continued use. |
| Loveseat feels unstable or wobbly. | Loose assembly bolts. | Check and tighten all assembly bolts securely. |
| Footrest does not fully extend or retract. | Obstruction or mechanism issue. | Check for any objects obstructing the mechanism. Ensure the lever is fully engaged/disengaged. |
| Missing parts upon delivery. | Shipping error. | Contact customer support immediately with your order details. |
8. Specifications
| Feature | Detail |
|---|---|
| Brand | CANMOV |
| Model | 54"W (2 Seat) |
| Overall Dimensions (D x W x H) | 36"D x 54"W x 41"H |
| Seat Depth | 21 inches |
| Seat Height | 20 inches |
| Weight Capacity | 700 Pounds |
| Seating Capacity | 2 |
| Material Type | Leathaire (air permeable, wear resistant, water resistant) |
| Frame Material | Metal, Solid Wood |
| Assembly Required | Yes |
| Reclining Angle | 90° to 150° |
| Color | Brown |
9. Warranty and Support
The CANMOV Manual Loveseat Recliner Sofa comes with a 1-year warranty. This warranty covers installation problems, damaged parts, and missing parts.
For any questions, concerns, or to claim warranty service, please contact INZOY customer service. We are committed to providing helpful, prompt, and friendly support.
Customer Service Contact: Please refer to your purchase documentation or the seller's contact information on the platform where you purchased the product for the most up-to-date support details.