DELAVIN BDK2024872BXIN

DELAVIN 44-48" W x 72" H Pivot Shower Door Instruction Manual

Model: BDK2024872BXIN

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your DELAVIN 44-48" W x 72" H Pivot Shower Door. This semi-frameless glass shower door features a water-repellent design with SGCC clear tempered glass and an explosion-proof film for enhanced safety. The adjustable width and reversible installation options allow for flexible integration into various bathroom layouts. Please read this manual thoroughly before beginning installation or use to ensure proper function and longevity of the product.

Safety Information

  • Always wear appropriate personal protective equipment, including safety glasses and gloves, during installation.
  • Handle glass panels with extreme care. Tempered glass, while strong, can shatter if struck at the edges or corners.
  • Ensure the installation surface (walls, floor) is structurally sound and capable of supporting the weight of the shower door.
  • Do not overtighten screws, as this can damage components or glass.
  • Keep children and pets away from the installation area.
  • If you are unsure about any step of the installation process, consult a qualified professional.

Package Contents

Verify that all components and accessories are present and undamaged before beginning installation. Refer to the packing list included with your product for a complete inventory. Typical components include:

  • Glass panels (fixed and pivot door)
  • Aluminum alloy frame components
  • Pivot hardware and seals
  • Stainless steel handle
  • Mounting hardware (screws, anchors, gaskets)
  • Water retention strip

Setup (Installation)

The DELAVIN pivot shower door is designed for flexible installation, allowing for width adjustment and reversible door orientation. Follow the steps below for proper assembly and installation.

Diagram showing overall dimensions of the DELAVIN pivot shower door, including adjustable width from 44 to 48 inches and a height of 72 inches.

Figure 1: Overall Dimensions. This diagram illustrates the adjustable width (A: 44-48 inches) and fixed height (B: 72 inches) of the shower door, along with other key measurements for installation planning.

Two images showing the shower door installed, one opening to the right and one opening to the left, demonstrating reversible installation.

Figure 2: Reversible Installation. The shower door can be configured to open from either the left or right side, adapting to your bathroom layout.

Key Installation Features:

  • Adjustable Width: The innovative retractable frame design allows the door frame to be adjusted between 44 and 48 inches, accommodating various shower opening sizes.
  • Reversible Design: The door can be installed to open outwards from either the left or right side, providing flexibility for your bathroom space.
  • Pivot Mechanism: The rotating shaft door design ensures a smooth and controlled opening and closing trajectory, reducing collision risk.

Installation Steps (General Overview):

  1. Prepare the Area: Ensure the shower area is clean, dry, and level. Measure your opening carefully to confirm it is within the 44-48 inch range.
  2. Assemble Frame: Connect the aluminum alloy frame components according to the detailed instructions provided in your product's specific manual. The high-strength aluminum alloy is designed for durability in humid environments.
  3. Close-up of the high-strength aluminum alloy frame corner, highlighting its robust construction.

    Figure 3: Aluminum Alloy Frame. The frame is constructed from lightweight yet sturdy aluminum alloy, resistant to corrosion.

  4. Mount Wall Profiles: Secure the wall profiles to the shower walls, ensuring they are plumb and level. Use appropriate anchors for your wall type.
  5. Install Glass Panels: Carefully place the tempered glass panels into the frame. The glass is 1/4" (6mm) thick, ANSI certified, and includes an explosion-proof film for safety.
  6. Close-up of 1/4 inch ANSI certified tempered safety glass, showing the certification mark.

    Figure 4: Tempered Safety Glass. The glass panels are 1/4 inch (6mm) ANSI certified tempered glass with an explosion-proof film.

  7. Attach Pivot Hardware: Install the pivot devices at the top and bottom of the door panel. These ensure smooth operation.
  8. Close-up of the retractable frame design and pivot mechanism at the top of the shower door.

    Figure 5: Retractable Frame and Upper Pivot. This image shows the adjustable frame and the upper pivot point for smooth door movement.

    Close-up of the bottom pivot device and the water bar designed to prevent leakage.

    Figure 6: Bottom Pivot and Water Bar. The efficient bottom pivot device ensures smooth operation, while the water bar prevents leakage.

  9. Install Handle: Attach the stainless steel handle to the door panel.
  10. Close-up of the stainless steel handle on the shower door.

    Figure 7: Stainless Steel Handle. The handle is made from high-end stainless steel for durability and a modern aesthetic.

  11. Seal and Finish: Apply silicone sealant as instructed to ensure a watertight seal. Allow adequate drying time before use.

For detailed, step-by-step instructions, refer to the specific installation guide included in your product packaging.

Operating the Shower Door

To open the DELAVIN pivot shower door, gently push or pull the handle in the desired direction. The pivot mechanism allows the door to swing outwards smoothly. To close, guide the door back into its closed position until it aligns with the fixed panel and seals properly. Avoid forcing the door or allowing it to slam shut to prevent damage to the glass or frame.

Maintenance

Regular cleaning and maintenance will help preserve the appearance and functionality of your shower door.

Cleaning the Glass:

  • Use a soft cloth or sponge with a mild, non-abrasive glass cleaner.
  • Avoid cleaners containing harsh chemicals, abrasive particles, or ammonia, as these can damage the glass surface or protective film.
  • Wipe down the glass after each use with a squeegee or soft cloth to prevent water spots and soap scum buildup.

Cleaning the Frame and Hardware:

  • Wipe the aluminum frame and stainless steel handle with a soft, damp cloth.
  • For stubborn dirt, use a mild soap solution. Rinse thoroughly and dry immediately to prevent water marks.
  • Do not use abrasive pads or harsh chemicals on the frame or hardware, as this can scratch the finish.

Inspecting Components:

  • Periodically check all screws and fasteners to ensure they are secure. Tighten if necessary, but do not overtighten.
  • Inspect seals and gaskets for any signs of wear or damage. Replace if necessary to maintain water tightness.

Troubleshooting

If you encounter issues with your shower door, refer to the following common problems and solutions:

ProblemPossible CauseSolution
Door does not close smoothly or completely.Misalignment of pivot points; debris in pivot mechanism; loose fasteners.Check that the frame is plumb and level. Clean any debris from the pivot mechanism. Tighten any loose screws on the pivot hardware.
Water leakage from around the door.Damaged or improperly installed seals/gaskets; insufficient silicone sealant; door not closing fully.Inspect all seals and gaskets for damage and replace if needed. Ensure silicone sealant was applied correctly and is intact. Verify the door closes completely and is properly aligned.
Door feels loose or wobbly.Loose mounting screws or frame connections.Carefully check and tighten all visible screws on the frame and wall profiles. Do not overtighten.
Scratches or marks on glass.Use of abrasive cleaners or tools.Avoid using abrasive materials for cleaning. Minor scratches may be polished with specialized glass repair kits, but deep scratches may require professional attention or glass replacement.

If the problem persists after attempting these solutions, please contact DELAVIN customer support.

Specifications

FeatureDetail
BrandDELAVIN
Model NumberBDK2024872BXIN
ColorElegant Black
MaterialAluminum, Glass
StyleModern
Assembly RequiredYes
Item Weight90.8 pounds
Product Dimensions0.24 x 48 x 72 inches (Glass thickness x Max Width x Height)
Adjustable Width Range44" - 48"
Glass Type1/4" (6mm) ANSI Certified Tempered Glass with Explosion-Proof Film

Warranty & Support

For information regarding product warranty, please refer to the warranty card included with your purchase or contact DELAVIN customer support directly. DELAVIN is committed to providing a comfortable and reliable bathroom experience.

For customer support, technical assistance, or to inquire about replacement parts, please visit the official DELAVIN store or contact their customer service department through the contact information provided with your product.

You can find more information about DELAVIN products and support at their official store: DELAVIN Store

© 2025 DELAVIN. All rights reserved.