1. Introduction
This manual provides essential information for the installation, care, and maintenance of your new OEM replacement refrigerator door bin. Please read these instructions carefully before proceeding with installation to ensure proper fit and longevity of the part.
2. Product Overview
The product is an OEM (Original Equipment Manufacturer) replacement door bin designed for specific refrigerator models. It is a clear, durable plastic bin that fits into the refrigerator door, providing additional storage space for various items.
Figure 2.1: Front view of the OEM Refrigerator Door Bin.
Figure 2.2: Top-down view of the OEM Refrigerator Door Bin.
3. Compatibility
This replacement door bin (Part Number: WPW10316461) is compatible with various refrigerator models. Please verify your refrigerator's model number against the list below to ensure proper fit.
Known compatible models include:
- Whirlpool KRSC703HPS01
- KitchenAid KRSC503ESS00
- 7KRSF77EST00
- KSC24C8EYY02
- KRSF705HPS05
Note: Appliance parts can look similar. Always confirm compatibility with your specific model number before installation.
4. Installation Instructions
Installing the refrigerator door bin is a straightforward process. No tools are typically required.
- Prepare the Refrigerator: Open the refrigerator door to access the interior. If replacing an old bin, remove it by lifting it straight up and out of its mounting slots.
- Identify Mounting Slots: Locate the designated slots or rails on the inside of the refrigerator door where the bin is to be installed. These are typically molded into the door liner.
- Align the Bin: Hold the new door bin with the open side facing upwards. Align the tabs or grooves on the back of the bin with the corresponding slots or rails on the refrigerator door.
- Insert and Secure: Gently slide the bin downwards into the slots until it clicks or settles firmly into place. Ensure both sides of the bin are securely seated and level.
- Test Fit: Lightly pull on the bin to confirm it is stable and does not wobble.
If you encounter resistance, do not force the bin. Re-check alignment and ensure no obstructions are present.
5. Care and Maintenance
To ensure the longevity and cleanliness of your refrigerator door bin, follow these simple care instructions:
- Cleaning: Regularly clean the bin with mild soap and warm water. Avoid abrasive cleaners or harsh chemicals, as these can scratch or damage the plastic.
- Drying: After washing, thoroughly dry the bin with a soft cloth or allow it to air dry completely before placing it back into the refrigerator.
- Load Capacity: Do not overload the bin with excessively heavy items, as this can stress the plastic and potentially lead to cracking or breakage over time.
- Temperature: Avoid exposing the bin to extreme temperature changes, such as placing it directly from a very cold refrigerator into hot water, which could cause thermal shock and damage.
6. Troubleshooting
If you experience issues with your new door bin, consider the following:
- Bin Does Not Fit:
- Double-check your refrigerator's model number against the compatibility list in Section 3.
- Ensure the bin is oriented correctly and aligned with the door's mounting slots.
- Inspect the mounting slots on the refrigerator door for any obstructions or damage.
- Bin Feels Loose:
- Ensure the bin is fully seated into the mounting slots. Apply gentle downward pressure until it locks into place.
- Verify that the mounting slots themselves are not damaged or worn.
If problems persist, contact the seller or a qualified appliance technician.
7. Specifications
| Attribute | Detail |
|---|---|
| Part Number | WPW10316461 |
| Manufacturer | Evanstone-Parts |
| ASIN | B0F8PDVT4S |
| Number of Pieces | 1 |
| Material | Plastic (Clear) |
8. Warranty and Support
Specific warranty information for this replacement part was not provided in the product data. For details regarding warranty coverage or technical support, please refer to the original purchase documentation or contact the seller directly.
Seller: Evanstone